Material Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
Thread Size Thread Size | Show |
|---|
Thread Size Thread Size | Hide |
|---|
Vertical Capacity Vertical Capacity |
|---|
|
Movement Movement |
|---|
 |  |
| 180° Pivot | 360° Swivel |
Application Application |
|---|
|
Finish Finish |
|---|
|
Threading Threading |
|---|
 | Fully Threaded |
Body Style Body Style |
|---|
 | With Shoulder |
Base Finish Base Finish |
|---|
|
Base Material Base Material |
|---|
|
Color Color |
|---|
 | Pink |
Eye Material Eye Material |
|---|
|
Length Length |
|---|
|
About Lifting with Hoist Rings
More
Hoist Rings—For Lifting
Steel and 316
Stainless Steel
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel offers mild corrosion resistance.
Nickel-coated steel is more corrosion resistant than black-oxide steel.
Hoist rings that are CE marked meet European requirements for health, safety, and environmental protection.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Black-Oxide Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 1/2"-6 | 2 5/8" | 4" | 11 7/8" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 0000000 |
Machined Black-Oxide Steel | ||||||||
| 1 1/2"-6 | 2 3/4" | 4 1/2" | 15 1/4" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Nickel-Coated Steel | ||||||||
| 1 1/2"-6 | 2 5/8" | 4" | 11 7/8" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Shackle Hoist Rings—For Lifting
Remove the shackle after lifting while keeping the base installed for future use. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Each | |
Black-Oxide Steel Base with Zinc-Plated Steel Eye | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/2"-6 | 2 1/4" | 3 3/4" | 14" | 24,000 | 180° Pivot and 360° Swivel | 0000000 | 0000000 |
Rotating Eyebolts—For Lifting
Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load. Eyebolts include a removable key for tightening the bolt.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | Vertical Capacity, lbs. | Color | Each | |
Powder-Coated Steel | ||||||||
| 1 1/2"-6 | 2 1/8" | 2 1/8" | 7 3/8" | 2 13/16" | 15,425 | Pink | 0000000 | 0000000 |