Material Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
Thread Size Thread Size | Show |
|---|
|
Thread Size Thread Size | Hide |
|---|
For Use With For Use With |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Flared Angle Flared Angle |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Swivel Type Swivel Type |
|---|
|
Specifications Met Specifications Met |
|---|
|
For Tube Material For Tube Material |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Hose
More
Threaded Hose Fittings for Hydraulic Fluid
Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.
Zinc-plated steel fittings are stronger and more durable than stainless steel fittings. They have fair corrosion resistance. Fittings that swivel until tightened rotate for easy installation.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings.
BSPP threads have a gasket or a 60° internal flare to protect against leaks.
Continuous-Swivel Threaded
Hose Fittings for Hydraulic Fluid
Also known as live swivels, these fittings have ball bearings, so they can swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause premature hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose end or to pumps, cylinders, and other equipment in your hydraulic system. They are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings and meet JIC standards for dimensions.
NPTF (Dryseal) threads are compatible with NPT threads. UN/UNF (SAE) male threads have a gasket to protect against leaks. They are also known as O-ring boss threads.
- Maximum Pressure: 5,000 psi @ 72° F
- Temperature Range: -40° to 250° F
Female Hose Connection | Male Tube Connection | ||||
|---|---|---|---|---|---|
| Pipe Size | Dash Size | For Tube OD | Thread Size | Each | |
Zinc-Plated Steel | |||||
| 1 | 16 | 1" | 1 5/16"-12 | 0000000 | 0000000 |
- Maximum Pressure: 5,000 psi @ 72° F
- Temperature Range: -40° to 250° F
Male Hose Connection | Male Tube Connection | ||||
|---|---|---|---|---|---|
| Thread Size | Dash Size | For Tube OD | Thread Size | Each | |
Zinc-Plated Steel | |||||
| 1 5/16"-12 | 16 | 1" | 1 5/16"-12 | 0000000 | 0000000 |
Screw-On Hose Fittings for Hydraulic Fluid
These two-piece fittings screw directly onto rubber hose without the need for a separate adapter. To install, separate the two pieces of the fitting (the hose-end portion and the nipple portion). Screw the hose-end portion of the fitting onto the hose, then thread the nipple portion of the fitting into the hose-end portion. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.
Zinc-plated steel fittings offer better strength and durability than 316 stainless steel fittings. They have fair corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings. They swivel 360° until tightened for easy installation.
Notes: Fittings are only for use with hydraulic hose.
- Maximum Pressure: See table
- Temperature Range: -40° to 212° F
- For Hose Manufacturer Series:
Parker 42 Series Fittings: Parker 422 SAE 100R1-AT
Parker 30 Series Fittings: Parker 302 SAE 100R2-AT - Specifications Met: See table
Fittings | Hose | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Hose | Per Ft. | |||||||||||
| ID | OD | For Tube OD | Thread Size | Thread Type | Dash Size | Max. Pressure | Specifications Met | Each | 1-99 | 100-Up | ||
Zinc-Plated Steel—Parker 42 Series | ||||||||||||
| 1" | 1 7/16" | 1" | 1 5/16"-12 | UN/UNF (Tube End) | 16 | 1,250 psi @ 72° F | SAE J516 | 00000000 | 000000 | 00000000 | 000000 | 00000 |
Zinc-Plated Steel—Parker 30 Series | ||||||||||||
| 1" | 1 1/2" | 1" | 1 5/16"-12 | UN/UNF (Tube End) | 16 | 2,400 psi @ 72° F | SAE J516 | 00000000 | 00000 | 0000000 | 00000 | 00000 |
316 Stainless Steel—Parker 30 Series | ||||||||||||
| 1" | 1 1/2" | 1" | 1 5/16"-12 | UN/UNF (Tube End) | 16 | 2,400 psi @ 72° F | SAE J514 | 0000000 | 000000 | 0000000 | 00000 | 00000 |
37° Flared Fittings for Stainless Steel Tubing
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They are 316 stainless steel for excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1" | 1 | 316 Stainless Steel | 3,000 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1" | 1 | 316 Stainless Steel | 3,000 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD | Material | Max. Pressure | Each | |
| 1" | 316 Stainless Steel | 3,000 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD | Material | Max. Pressure | Each | |
| 1" | 316 Stainless Steel | 2,500 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
Inline tees are also known as branch tees.
| For Tube OD | Material | Max. Pressure | Each | |
| 1" | 316 Stainless Steel | 2,500 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
Right-angle tees are also known as run tees.
| For Tube OD | Material | Max. Pressure | Each | |
| 1" | 316 Stainless Steel | 2,500 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
| For Tube OD | Nut Material | Each | |
| 1" | 316 Stainless Steel | 000000000 | 000000 |
37° Flared Fittings for Steel Tubing
- Tubing: Use with seamless steel
- Specifications Met: SAE J514, JIC
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
To prevent leaks, UN/UNF (SAE) male threads have a gasket. Metric and BSPP male threads have either a gasket or a gasket and washer. UN/UNF (SAE) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: BSPP: Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
UN/UNF (SAE): Air, Fuel Oil, Hydraulic Fluid, Mineral Oil - Temperature Range: BSPP: -20° to 212° F
UN/UNF (SAE): -60° to 400° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD | Thread Size | Material | Gasket Material | Max. Pressure | Each | |
UN/UNF (SAE) Threads | ||||||
|---|---|---|---|---|---|---|
| 1" | 1 5/16"-12 | Zinc-Plated Steel | Buna-N Rubber | 2,500 psi @ 72° F | 00000000 | 000000 |
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temperature Range: -60° to 400° F
| For Tube OD | Sleeve Material | Max. Pressure | Each | |
| 1" | Zinc-Plated Steel | 2,500 psi @ 72° F | 000000000 | 00000 |