About Rotating Joints
Rotating joints transfer hot and cold materials from your supply line to a continuously revolving drum, roller, or other rotating equipment.
Pipe size is an industry designation, not the actual size. View information about how to measure pipe size threads.
More
About Nuts, Materials, and Finishes
More
About Vibration-Damping Mounts
More
About Leveling Mounts
More
Aluminum One-Way-Flow Rotating Joints
- For Use With: Air, Hydraulic Oil
- Temperature Range: See table
- Maximum Pressure:
Air: 150 psi @ 72° F
Oil: See table - Maximum Vacuum: 28 in. of Hg @ 72° F
These joints have a rotating shaft with threads on one end that connect to a continuously revolving drum, roller, or other rotating equipment. Use them to transfer hot and cold materials from your supply line. Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line. Joints are made of lightweight aluminum. They are a compact size for use in small air and hydraulic applications.
If your drum rotates counterclockwise as you face the connecting end, you should select a rotating joint with right-handed threads.
For technical drawings and 3-D models, click on a part number.
Rotating Threads | Stationary Threads | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Max. Speed, rpm | Body Dia. | Lg. | Max. Oil Pressure | Temperature Range, °F | Shaft Material | Each | |
Right-Hand Rotating Threads | |||||||||||||
3/8"-24 | UNF | Male | 1/8 | NPT | Female | 3,500 | 1 1/8" | 2 13/16" | 1,000 psi @ 72° F | -20° to 250° | Steel | 0000000 | 0000000 |
Yellow Zinc-Plated Steel Swivel Leveling Mounts with Threaded Stud
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Nickel-Plated Steel Swivel Leveling Mounts with Threaded Stud
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Black-Oxide Steel Swivel Leveling Mounts with Threaded Stud
Black-oxide steel has a dull shine for areas where appearance is a concern. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
Black Oxide Steel with Zinc-Plated Steel Stud | ||||||||
---|---|---|---|---|---|---|---|---|
3/8"-24 | 2" | 3,300 | 1 1/4" | 2 7/8" | 5/8" | -20° to 170° | 00000000 | 000000 |
Black Oxide Steel with Rubber Cushion and Zinc-Plated Steel Stud | ||||||||
3/8"-24 | 2" | 2,475 | 1 1/4" | 3" | 5/8" | -20° to 170° | 00000000 | 00000 |
Plastic Swivel Leveling Mounts with Threaded Stud
An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Swivel Leveling Mounts with Threaded Stud
Made entirely of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Bolt-Down Swivel Leveling Mounts with Threaded Stud
Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Performance | Each | |
Plastic with Zinc-Plated Steel Stud | |||||||||||||
3/8"-24 | 2" | 3,300 | 2" | 3 1/8" | 5/8" | -20° to 170° | No | 2 | 1/4" | 1 5/16" | Stay Put | 00000000 | 000000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | |||||||||||||
3/8"-24 | 2" | 3,300 | 2" | 3 3/16" | 5/8" | -20° to 170° | No | 2 | 1/4" | 1 5/16" | Antislip, Stay Put | 00000000 | 0000 |
Yellow Zinc-Plated Steel Swivel Leveling Mounts with Threaded Hole
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Nickel-Plated Steel Swivel Leveling Mounts with Threaded Hole
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
Nickel-Plated Steel with Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
3/8"-24 | 3/8" | 2,475 | 1 1/4" | 1" | 5/8" | -20° to 170° | 00000000 | 00000 |
Corrosion-Resistant Swivel Leveling Mounts with Threaded Hole
Made of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Each | |
303 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|
3/8"-24 | 3/8" | 3,300 | 1 1/4" | 7/8" | 5/8" | 00000000 | 000000 |
Quick-Install Vibration-Damping Leveling Mounts with Threaded Stud
A two-piece design simplifies installation and requires less clearance than one-piece mounts. Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their cushion grips the floor for stability and is resistant to oil and grease. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
Steel with Rubber Cushion and Zinc-Plated Steel Stud | ||||||||
---|---|---|---|---|---|---|---|---|
3/8"-24 | 3" | 300 | 0.06" | 3 1/8" | 4 1/2" | -20° to 180° | 00000000 | 0000000 |
Rotating Flange Nuts
The nut head rotates while the flange remains stationary to prevent scratching the material surface as you tighten the nut. A black-oxide finish provides mild corrosion resistance in dry environments. Height includes the flange.
For technical drawings and 3-D models, click on a part number.
Flange | |||||||
---|---|---|---|---|---|---|---|
Thread Size | Wd. | Ht. | Dia. | Thick. | Material | Each | |
Black-Oxide Steel | |||||||
3/8"-24 | 11/16" | 17/32" | 7/8" | 0.16" | Steel | 000000000 | 00000 |
Swiveling Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | Black-Oxide Steel | 000000000 | 000000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | 18-8 Stainless Steel | 000000000 | 000000 |
Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | Black-Oxide Steel | 0000000 | 00000 |
Corrosion-Resistant Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 18-8 Stainless Steel | 000000000 | 000000 |
Closed-Body Mounting-Plate-to-Wire Rope Turnbuckles—Not for Lifting
Create a wire rope railing, perimeter, or barrier. These turnbuckles have a closed body that protects them from damage and debris and keeps them slim enough to fit in tight spaces. All are 316 stainless steel, so they have excellent resistance to chemicals and salt water.
Turnbuckles with a sleeve grip fitting have a mounting plate with swivel ends. To install, mount the turnbuckle to a wall or post. Then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for in-line pulling only.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | For Wire Rope | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Lg. | Wd. | Movement | Dia. | Construction | Wire Rope Fitting Type | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Thread Size | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||||||
70% of the Rope's Capacity | 9" | 3 7/16" | 12 7/16" | 3 1/16" | 7/8" | 360° Swivel | 1/4" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.394" | Yes | 3/8"-24 | 0000000 | 000000 |