Material Material |
---|
|
System of Measurement System of Measurement |
---|
|
Thread Size Thread Size | Show |
---|
Thread Size Thread Size | Hide |
---|
Thread Pitch Thread Pitch |
---|
Base Material Base Material |
---|
|
Adjustability Adjustability |
---|
![]() | Swivel |
Movement Movement |
---|
![]() | ![]() |
180° Pivot | 360° Swivel |
Mount Type Mount Type |
---|
![]() | ![]() |
Threaded Hole | Threaded Stud |
Capacity per Mount Capacity per Mount |
---|
|
Overall Height Overall Height |
---|
Stud Material Stud Material |
---|
|
Vertical Capacity Vertical Capacity |
---|
|
Finish Finish |
---|
|
Thread Type Thread Type |
---|
|
Hex Nut Material Hex Nut Material |
---|
|
Base Shape Base Shape |
---|
|
Application Application |
---|
|
Swivel Range of Motion Swivel Range of Motion |
---|
|
More
More
More
More
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel offers mild corrosion resistance.
Nickel-coated steel is more corrosion resistant than black-oxide steel.
316 stainless steel provides the most corrosion resistance.
Hoist rings that are CE marked meet European requirements for health, safety, and environmental protection.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Black-Oxide Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M24 | 3 | 28 | 71 | 216 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 0000000 |
M24 | 3 | 28 | 71 | 257 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M24 | 3 | 38 | 71 | 226 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M24 | 3 | 38 | 71 | 267 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined Black-Oxide Steel | |||||||||
M24 | 3 | 34 | 71 | 200 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M24 | 3 | 34 | 71 | 241 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Nickel-Coated Steel | |||||||||
M24 | 3 | 28 | 71 | 216 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M24 | 3 | 37 | 71 | 200 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
316 Stainless Steel | |||||||||
M24 | 3 | 37 | 72 | 203 | 4,600 | 180° Pivot and 360° Swivel | ASME B30.26 | 0000000 | 000000 |
Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load. Eyebolts include a removable key for tightening the bolt.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Shank Lg., mm | Overall Lg., mm | Eye Dia., mm | Vertical Capacity, lbs. | Color | Each | |
Powder-Coated Steel | |||||||||
M24 | 3 | 36 | 36 | 127 | 48 | 7,050 | Pink | 0000000 | 0000000 |
Zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Temperature Range, °F | Each | |
Zinc-Plated Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M24 | 3 | 89 | 19,840 | 102 | 137 | 35 | __ | 0000000 | 000000 |
M24 | 3 | 108 | 19,840 | 102 | 156 | 35 | __ | 0000000 | 00000 |
Zinc-Plated Steel with Rubber Cushion | |||||||||
M24 | 3 | 89 | 14,990 | 102 | 140 | 35 | -20° to 170° | 0000000 | 00000 |
M24 | 3 | 108 | 14,990 | 102 | 159 | 35 | -20° to 170° | 0000000 | 00000 |
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
Nickel-Plated Steel | |||||||
---|---|---|---|---|---|---|---|
M24 | 89mm | 19,500 | 102mm | 137mm | __ | 00000000 | 000000 |
M24 | 108mm | 19,500 | 102mm | 156mm | __ | 00000000 | 00000 |
Nickel-Plated Steel with Rubber Cushion | |||||||
M24 | 89mm | 14,500 | 102mm | 140mm | -20° to 170° | 00000000 | 00000 |
M24 | 108mm | 14,500 | 102mm | 159mm | -20° to 170° | 00000000 | 00000 |
Made entirely of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Each | |
303 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M24 | 3 | 89 | 19,800 | 102 | 137 | 35 | 0000000 | 000000 |
M24 | 3 | 108 | 19,800 | 102 | 156 | 35 | 0000000 | 000000 |
303 Stainless Steel with Rubber Cushion | ||||||||
M24 | 3 | 89 | 14,900 | 102 | 140 | 35 | 00000000 | 000000 |
M24 | 3 | 108 | 14,900 | 102 | 159 | 35 | 00000000 | 000000 |
Made entirely of 316 stainless steel, these mounts have superior corrosion resistance. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Each | |
316 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M24 | 3 | 89 | 19,800 | 102 | 137 | 35 | 0000000 | 0000000 |
Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Thread Lg., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia., mm | Ctr.-to-Ctr. Lg., mm | Each | |
Plastic with Zinc-Plated Steel Stud | |||||||||||||
M24 | 3 | 102 | 10,000 | 127 | 159 | 35 | -20° to 170° | No | 2 | 12 | 98 | 0000000 | 000000 |
M24 | 3 | 152 | 7,500 | 102 | 185 | 35 | -20° to 170° | No | 2 | 11.9 | 68.8 | 0000000 | 00000 |
M24 | 3 | 152 | 10,000 | 127 | 210 | 35 | -20° to 170° | No | 2 | 12 | 98 | 0000000 | 00000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | |||||||||||||
M24 | 3 | 152 | 7,500 | 102 | 186.6 | 35 | -20° to 170° | No | 2 | 11.9 | 68.8 | 0000000 | 00000 |
M24 | 3 | 152 | 10,000 | 127 | 211.6 | 35 | -20° to 170° | No | 2 | 12 | 98 | 00000000 | 00000 |
Zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Made entirely of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Dp., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Each | |
303 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M24 | 3 | 17.5 | 19,800 | 102 | 48 | 35 | 0000000 | 000000 |
All-stainless steel construction stands up to water and chemicals and won't rust or corrode. Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Overall Ht. | Temperature Range, °F | |
304 Stainless Steel with Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
M24 | 3 | 4 3/4" | 2,000 | 0.12" | 3 7/8" | 6 5/16" | -20° to 190° | 00000000 |
M24 | 3 | 4 3/4" | 3,000 | 0.17" | 5 1/2" | 7" | -20° to 190° | 00000000 |
M24 | 3 | 4 3/4" | 4,000 | 0.17" | 5 1/2" | 7" | -20° to 190° | 00000000 |
Higher deflection ratings translate to greater vibration and shock isolation. These mounts have a rubber base that grips the floor for stability and is resistant to oil and grease. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Swivel Range of Motion | Base Dia. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Rubber with Zinc-Plated Steel Stud | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M24 | 3 | 2 5/8" | 3,700 | 0.13" | 7.5° | 5" | 1 1/2" | 5 3/4" | Durometer 50A | Medium | -20° to 180° | 00000000 | 000000 |
M24 | 3 | 2 5/8" | 8,000 | 0.13" | 7.5° | 5" | 1 1/2" | 5 3/4" | Durometer 70A | Hard | -20° to 180° | 00000000 | 00000 |
The nut head rotates while the flange remains stationary to prevent scratching the material surface as you tighten the nut. A black-oxide finish provides mild corrosion resistance in dry environments. Height includes the flange.
For technical drawings and 3-D models, click on a part number.
Thread | Flange | |||||||
---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Dia., mm | Thick., mm | Material | Each | |
Black-Oxide Steel | ||||||||
M24 | 3 | 41 | 31.3 | 50.8 | 11.9 | Steel | 000000000 | 000000 |