The mounting screws on these latches are concealed to prevent tampering. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

For technical drawings and 3-D models, click on a part number.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed. To latch, turn the knob a quarter-turn to draw the cam against the door or drawer surface. A quarter-turn in the opposite direction releases the tension and opens the door or drawer.

For technical drawings and 3-D models, click on a part number.

Designed for food-processing and hygienic applications, this corrosion-resistant latch is FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food. It comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns. Select the turn direction when mounting the cam. Each latch comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Also known as a compression cam lock, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface. Choose this lock if you need several locks that open with the same key. It comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need several locks that open with the same key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

To Order: For replacement keys, please specify key number.

For technical drawings and 3-D models, click on a part number.

The mounting screws on these locks are concealed to prevent tampering. Choose them if you need several locks that open with the same key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

To Order: For replacement keys, please specify key number.

For technical drawings and 3-D models, click on a part number.

These locks are IP65 rated for protection against dust, dirt, and washdowns. Choose them if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with one straight and two nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

The mounting screws on these locks are concealed to prevent tampering. Choose them if you need locks that each open with a different key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

To Order: For replacement keys, please specify key number.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need locks that each open with a different key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.

To Order: For replacement keys, please specify key number.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need locks that each open with a different key and also open with a master key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors. Two keys are included; master keys are sold separately.

For technical drawings and 3-D models, click on a part number.

The mounting screws on these locks are concealed to prevent tampering. Choose them if you need locks that each open with a different key and also open with a master key. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors. Two keys are included; master keys are sold separately.

For technical drawings and 3-D models, click on a part number.

Use these latches alone for single-point latching. Add latch kits for multiple-point latching to create additional holding power.

Style A-C latches arrive ready for single-point latching; add a latch kit for two-point latching or two latch kits for three-point latching.

Style A latches allow selecting the turn direction when mounting the cam. They come with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.

Style B latches allow selecting the turn direction when mounting the cam.

Style C latches have a handle that lifts and then folds out of the way when not in use.

Style D latches require a latch kit to operate. Use the actuator plate from the compatible latch kit for single-point latching, or the entire latch kit for three-point latching. These latches come with three nonreversible offset cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

The T-handle on mortise-mount locks lifts and then folds out of the way when not in use.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

These latches are typically used to secure hoods and covers. Designed with a spring-loaded handle, they withstand vibration better than other standard latches for a more secure hold. The overall length listed includes the strike plate.

Style C latches have adjustable mounting bases, so you can mount them horizontally or vertically. Line up the base with the hook for horizontal mounting, or bend it perpendicular to the hook for vertical mounting.

For technical drawings and 3-D models, click on a part number.