Grip Style Grip Style |
|---|
 |  |
| Two Arm | Knurled |
 |  |
| Six Arm | Single Arm |
Mount Type Mount Type |
|---|
 |  |
| Threaded Hole | Threaded Stud |
 |  |
| Press Fit | Screw |
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
Head Width Head Width |
|---|
|
|
|
Head Height Head Height |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Stud Material Stud Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
T-Handle Key Stands
Each slot is marked with the size. Set these organizers on a bench top or wall mount.
Stands for 22 keys have slots labeled with hex and Torx sizes but can only hold one drive style at a time.
| For Number of Keys | For Drive Style | For Key Sizes | Lg. | Wd. | Ht. | Material | Each | |
| 8 | Hex | 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm | 7 3/4" | 6" | 2" | Plastic | 00000000 | 00000 |
| 8 | Torx | T9, T10, T15, T20, T25, T27, T30, T40 | 7 3/4" | 6" | 2" | Plastic | 00000000 | 0000 |
| 10 | Hex | 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" | 7 3/4" | 6" | 2" | Plastic | 00000000 | 0000 |
| 22 | Hex, Torx | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1.3 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, T6, T8, T10, T15, T20, T25, T27, T30, T40, T45, T50 | 5 1/2" | 7 1/2" | 6" | Plastic | 00000000 | 00000 |
Threaded-Hole Knobs
Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Polypropylene has good impact resistance. Nylon has good wear resistance. ABS has excellent impact resistance.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 13—Two Arm Grip | |||||||||||
Black Phenolic Plastic | |||||||||||
| 1/4"-20 | __ | 3/8" | 1 1/8" | 5/8" | 1/2" | 1/8" | Brass | -30 to 400° | 0000000 | 00000 | 00000 |
| 1/4"-20 | __ | 3/8" | 2" | 5/8" | 3/4" | 1/2" | Brass | -30 to 400° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 3/8" | 2 1/2" | 5/8" | 3/4" | 1/2" | Brass | -30 to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2" | 5/8" | 3/4" | 1/2" | Brass | -30 to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Brass | -30 to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 2" | 5/8" | 3/4" | 1/2" | Brass | -30 to 400° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 12mm | 29mm | 19mm | 13mm | __ | Brass | -20 to 380° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 12mm | 51mm | 29mm | 19mm | __ | Brass | -20 to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 12mm | 29mm | 19mm | 13mm | __ | Brass | -20 to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 12mm | 51mm | 29mm | 19mm | __ | Brass | -20 to 380° | 00000000 | 0000 | 0000 |
Black Polypropylene Plastic | |||||||||||
| 10-32 | __ | 3/8" | 1 1/2" | 5/8" | 3/4" | 1/8" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1/2" | 1 1/2" | 5/8" | 3/4" | 1/8" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 1 1/2" | 5/8" | 3/4" | 1/8" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Brass | -15 to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 3 1/2" | 7/8" | 15/16" | 1/4" | Brass | -15 to 125° | 00000000 | 0000 | 0000 |
Black Nylon Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Brass | -15 to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Brass | -15 to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 3/4" | 2 1/2" | 5/8" | 3/4" | 1/2" | Aluminum | -15 to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 3/4" | 3 1/2" | 7/8" | 15/16" | 1/4" | Aluminum | -15 to 150° | 00000000 | 0000 | 0000 |
| 1/2"-13 | __ | 5/8" | 3 1/2" | 7/8" | 15/16" | 1/4" | Zinc-Plated Steel | -15 to 150° | 00000000 | 0000 | 0000 |
Style 14—Two Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
Style 16—Two Arm Grip | |||||||||||
Black Plastic | |||||||||||
| M4 | 0.7mm | 10mm | 35mm | 10mm | 15.5mm | 8mm | Brass | -40 to 230° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 10mm | 45mm | 10mm | 20mm | 8mm | Brass | -40 to 230° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 16mm | 45mm | 13mm | 20mm | 11mm | Brass | -40 to 230° | 00000000 | 0000 | 0000 |
Style 17—Two Arm Grip | |||||||||||
Black Phenolic Plastic | |||||||||||
| 5/16"-18 | __ | 7/16" | 2 1/4" | 9/16" | 9/16" | 11/16" | Brass | -25 to 300° | 0000000 | 0000 | 0000 |
Style 18—Two Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 3" | 3/8" | 13/16" | 13/16" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 3" | 3/8" | 13/16" | 13/16" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 3" | 3/8" | 13/16" | 13/16" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
Style 19—Two Arm Grip | |||||||||||
Black ABS Plastic | |||||||||||
| 10-24 | __ | 3/8" | 1 1/4" | 11/16" | 5/8" | 1/2" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 10-32 | __ | 3/8" | 1 1/4" | 13/16" | 5/8" | 1/2" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
| 1/4"-20 | __ | 3/8" | 1 1/4" | 13/16" | 5/8" | 1/2" | Brass | -15 to 125° | 0000000 | 0000 | 0000 |
Threaded-Stud Knobs
Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance. Polypropylene has good impact resistance.
For technical drawings and 3-D models, click on a part number.
Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch | Stud Lg. | Wd. | Ht. | Dia. | Ht. | Stud Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 7—Two Arm Grip | |||||||||||
Black Phenolic Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 1 1/8" | 5/8" | 1/2" | 1/8" | Steel | -30° to 400° | 0000000 | 00000 | 00000 |
| 1/4"-20 | __ | 9/16" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 3/4" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 3/4" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 29mm | 19mm | 13mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 51mm | 29mm | 19mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 30mm | 29mm | 19mm | 13mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 30mm | 51mm | 29mm | 19mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
Black Nylon Plastic | |||||||||||
| 1/4"-20 | __ | 1" | 1 1/8" | 9/16" | 1/2" | 1/8" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 3 1/2" | 7/8" | 15/16" | 1/4" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 3 1/2" | 7/8" | 15/16" | 1/4" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
Black Polypropylene Plastic | |||||||||||
| 5/16"-18 | __ | 1/2" | 1 1/2" | 5/8" | 3/4" | 1/8" | Steel | -15° to 125° | 0000000 | 0000 | 0000 |
| 1/2"-13 | __ | 1" | 3 1/2" | 7/8" | 15/16" | 1/4" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Style 8—Two Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Stainless Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2 1/4" | 3/4" | 3/4" | 11/16" | Stainless Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Stainless Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Style 9—Two Arm Grip | |||||||||||
Black Plastic | |||||||||||
| M6 | 1mm | 15mm | 35mm | 10mm | 15.5mm | 8mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 15mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 35mm | 10mm | 15.5mm | 8mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 15mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 30mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
Style 10—Two Arm Grip | |||||||||||
Black Nylon Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 3" | 3/8" | 3/4" | 13/16" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 3" | 3/8" | 3/4" | 13/16" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
Style 11—Two Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| 10-32 | __ | 3/4" | 1 1/4" | 3/4" | 1/2" | 1/8" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1/2" | 1 1/4" | 3/4" | 1/2" | 1/8" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Threaded Through-Hole Knobs
Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Nylon has good wear resistance.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 2—Two Arm Grip | ||||||||||
Black Nylon Plastic | ||||||||||
| 1/4"-20 | 3/8" | 1 1/8" | 9/16" | 1/2" | 1/8" | Brass | -15° to 150° | 0000000 | 00000 | 00000 |
Vibration-Resistant Threaded Through-Hole Knobs
Like locknuts, these knobs have a nylon insert that grips threads to resist loosening. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, all resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 1—Two Arm Grip | ||||||||||
Black Polypropylene Plastic | ||||||||||
| 1/4"-20 | 5/16" | 2" | 5/8" | 3/4" | 1/2" | Zinc-Plated Steel | -15° to 125° | 00000000 | 00000 | 00000 |
| 5/16"-18 | 5/16" | 2" | 5/8" | 3/4" | 1/2" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | 5/16" | 2 1/2" | 5/8" | 3/4" | 1/2" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | 1/2" | 2" | 5/8" | 3/4" | 1/2" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Screw-Head Mount Knobs
To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw and press the knob and screw together. All of these knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, they resist oil, grease, and solvents. Use color to identify equipment controls and components at a glance.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Screw Size | Wd. | Ht. | Temperature Range, °F | Choose a Color | Pkg. Qty. | Pkg. | ||
Style 3—Two Arm Grip | ||||||||
Acetal Plastic—For Socket Head Screws | ||||||||
| No. 10 | 1" | 1/4" | 35° to 180° | 50 | 000000000 | 00000 | 00 | |
| 1/4" | 1 1/4" | 5/16" | 35° to 180° | 50 | 000000000 | 00000 | 00 | |
| 5/16" | 1 1/2" | 13/32" | 35° to 180° | 25 | 000000000 | 0000 | 00 | |
| 3/8" | 1 3/4" | 15/32" | 35° to 180° | 25 | 000000000 | 0000 | 00 | |
| M5 | 26mm | 6.6mm | 35° to 180° | 50 | 000000000 | 0000 | 00 | |
| M6 | 30mm | 7.8mm | 35° to 180° | 50 | 000000000 | 00000 | 00 | |
| M8 | 38mm | 10.3mm | 35° to 180° | 50 | 000000000 | 00000 | 00 | |
| M10 | 45mm | 12.5mm | 35° to 180° | 25 | 000000000 | 0000 | 00 | |
Each | ||||||||
| 1-9 | 10-Up | |||||||
Nylon Plastic—For Socket Head Screws | ||||||||
| 1/4" | 1 1/8" | 9/16" | -15° to 150° | Black | __ | 00000000 | 0000 | 00000 |
Screw-Head Mount Knob Assortments
Keep a convenient selection of knobs on hand. To build a custom knob or thumb screw, pair one of these knobs with a socket head screw. Press the knob and screw together using a bench vise or an arbor press. Use these knobs to provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, they resist oil, grease, and solvents.
| Total No. of Pieces | Grip Style | No. of Pieces | For Screw Size | Temperature Range, °F | Each | |
Black Acetal Plastic | ||||||
|---|---|---|---|---|---|---|
For Socket Head Screws | ||||||
| 295 | Knurled Single Arm Two Arm Six Arm | 140 15 60 80 | No. 4, No. 6, No. 8, No. 10, 1/4", 5/16" No. 10, 1/4", 5/16" No. 10, 1/4", 5/16", 3/8" 1/4", 5/16", 3/8" | 35° to 180° | 000000000 | 000000 |
| 260 | Knurled Two Arm Six Arm | 120 60 80 | M3, M4, M5, M6, M8 M5, M6, M8 M6, M8, M10 | 35° to 180° | 000000000 | 00000 |
Indicating Knobs
Control devices with round or D-shaped shafts and view settings at a glance with a pointer.
Knobs for D-profile shafts simply press on and stay in place.
Knobs for round shafts include a set screw to secure them in place.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance.
For technical drawings and 3-D models, click on a part number.
Head | Hole | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Dia. | Dp. | Cap Color | Insert Material | Set Screw Included | Temperature Range, °F | 1-9 | 10-Up | |
Style 12—Two Arm Grip | ||||||||||
Black Phenolic Plastic—For Round Shafts | ||||||||||
| 1 5/16" | 5/8" | 1/4" | 9/16" | Silver | __ | Yes | -30 to 400° | 0000000 | 00000 | 00000 |
Style 14—Two Arm Grip | ||||||||||
Black Phenolic Plastic—For D-Profile Shafts | ||||||||||
| 2" | 5/8" | 1/4" | 1/2" | __ | __ | No | -30 to 400° | 0000000 | 0000 | 0000 |
Black Phenolic Plastic—For Round Shafts | ||||||||||
| 1 1/4" | 5/8" | 1/4" | 1/2" | __ | __ | Yes | -30 to 400° | 0000000 | 0000 | 0000 |
| 1 1/4" | 5/8" | 1/4" | 1/2" | __ | Brass | Yes | -30 to 400° | 0000000 | 0000 | 0000 |
| 2" | 5/8" | 1/4" | 1/2" | __ | __ | Yes | -30 to 400° | 0000000 | 0000 | 0000 |
T‐Slotted Framing Handles
Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.
Choose-a-color pull handles allow you to identify equipment and components at a glance.
Sure-grip pull handles have finger indentations for a more secure grip than other handles.
Offset sure-grip pull handles are offset from the mounting surface so there's room to fully grasp the handle, even in tight spaces and on double doors.
For technical drawings and 3-D models, click on a part number.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg. | Projection | Mounting Fasteners Included | Choose a Color | Each | |
Pull Handles | ||||||||
Plastic | ||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 4 1/2" | 1 5/8" | Yes | Black | 00000000 | 000000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 5 1/2" | 1 5/8" | Yes | Red | 000000000 | 00000 |
| 1" | 2" | 3" | 4 7/16" | 1 7/16" | Yes | Black | 000000000 | 0000 |
| 1" | 2" | 3" | 4 7/16" | 1 7/16" | Yes | Red | 000000000 | 00000 |
| 20mm | 40mm | __ | 5 3/16" | 1 5/8" | Yes | Black | 0000000 | 0000 |
| 30mm | 60mm | __ | 5 3/16" | 1 5/8" | Yes | Black | 00000000 | 0000 |
| 45mm | 90mm | __ | 5 3/16" | 1 5/8" | Yes | Black | 00000000 | 00000 |
Choose-a-Color Pull Handles | ||||||||
Plastic | ||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 5 3/4" | 1 11/16" | Yes | 0000000 | 00000 | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 11/16" | 2" | Yes | 0000000 | 00000 | |
Sure-Grip Pull Handles | ||||||||
Plastic | ||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 9 7/16" | 2 15/16" | Yes | Black | 00000000 | 00000 |
| 1" | 2" | 3" | 4 11/16" | 1 15/16" | Yes | Black | 000000000 | 00000 |
| 40mm, 45mm | 80mm, 90mm | 120mm | 7 3/8" | 2 3/8" | Yes | Black | 0000000 | 00000 |
| 20mm | 40mm | __ | 5 5/8" | 1 7/8" | Yes | Black | 00000000 | 00000 |
| 30mm | 60mm | __ | 7 3/8" | 2 3/8" | Yes | Black | 00000000 | 00000 |
| 45mm | 90mm | __ | 9 7/16" | 2 15/16" | Yes | Black | 00000000 | 00000 |
Offset Sure-Grip Pull Handles | ||||||||
Plastic | ||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 9 7/16" | 3 1/8" | Yes | Black | 00000000 | 00000 |
| 30mm | 60mm | __ | 5 5/16" | 2 9/16" | Yes | Black | 00000000 | 00000 |
| 45mm | 90mm | __ | 9 7/16" | 3 1/8" | Yes | Black | 0000000 | 00000 |