About Cam Latches and Locks
More
Tight-Hold T-Handle Cam Latches
Also known as a compression cam latch, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface. Latch comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.
For technical drawings and 3-D models, click on a part number.
Latching Distance | Handle | Offset Cam | Mounting Plate | Mounting Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Short | Long | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Max. Clamping Force, lbs. | For Use On | Each | |
Black Painted Zinc | ||||||||||||||||||
Half-Turn Counterclockwise to Open | ||||||||||||||||||
5/32" | 1/4"-15/16" | 1 1/4"-1 15/16" | 13/16" | 3" | 7/8" | 1 1/4" | 1 11/16" | 5/8" | 1 9/16" | 15/16" | Yes | 2 | 5/32" | 1 1/4" | 100 | Metal, Plastic, Wood | 0000000 | 000000 |
T-Handle Cam Latches
Style A comes with two handles (one inside and one outside). Select the turn direction of the latch when mounting the cam.
Style B cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.
For technical drawings and 3-D models, click on a part number.
Handle | Offset Cam | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Proj. | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Each | |
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||
A | 1 1/2" | 1/8"-2" | 3/8" | 3" | 3/8" | 1 3/4" | 2 9/16" | 1 3/4" | 5/16" | Yes | 00000000 | 000000 |
Handle | Straight Cam | Spindle | Mount. Plate | Mount. | Mount. Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Proj. | Lg. | Wd. | Lg. | Square Size | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | Each | |
Quarter-Turn Clockwise to Open | |||||||||||||||||||
B | 2 15/16" | 3 1/4" | 7/8" | 3 3/16" | 11/32" | 1 13/16" | 1 7/16" | 5/8" | 3 3/16" | 5/16" | 2 5/16" | 1 3/16" | No | M5 | 2 | 5.5 | 1 3/4" | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | |||||||||||||||||||
B | 2 15/16" | 3 1/4" | 7/8" | 3 3/16" | 11/32" | 1 13/16" | 1 7/16" | 5/8" | 3 3/16" | 5/16" | 2 5/16" | 1 3/16" | No | M5 | 2 | 5.5 | 1 3/4" | 0000000 | 00000 |
Tamper-Resistant T-Handle Cam Latches
The mounting screws on these latches are concealed to prevent tampering. The cam can be mounted to latch at a single point; or for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Spindle | Mounting Plate | Mounting Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Lg. | Square Size | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia., mm | Ctr.-to-Ctr. | For Use On | Each | |
Chrome-Plated Zinc—Polished | ||||||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||||||
1/8" | 3/8" | 7/8" | 3 3/16" | 11/32" | 1 13/16" | 1 7/16" | 5/8" | 9/16" | 5/16" | 2 5/16" | 1 3/16" | Yes | 2 | 4.2 | 1 1/2" | Metal, Plastic, Wood | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | ||||||||||||||||||
1/8" | 3/8" | 7/8" | 3 3/16" | 11/32" | 1 13/16" | 1 7/16" | 5/8" | 9/16" | 5/16" | 2 5/16" | 1 3/16" | Yes | 2 | 4.2 | 1 1/2" | Metal, Plastic, Wood | 0000000 | 00000 |
Washdown T-Handle Cam Latches
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns. These latches help you maintain an IP65 level of protection when they're installed in a sealed enclosure. Each latch comes with one straight and two nonreversible offset cams to accommodate different latching distances. Choose the turn direction when mounting the cam.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Black Painted Zinc (Black Nylon Plastic Handle) | ||||||||||||||
5/16" | 11/16", 13/16", 1 1/16" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 000000 |
25/32" | 1 3/16", 1 11/32", 1 9/16" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
1 11/64" | 1 9/16", 1 3/4", 1 31/32" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
1 9/16" | 1 31/32", 2 1/8", 2 11/32" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
1 31/32" | 2 11/32", 2 1/2", 2 3/4" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
Black Powder-Coated Zinc | ||||||||||||||
5/16" | 29/32", 1 7/32", 1 15/32" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||
5/16" | 11/16", 13/16", 1 1/16" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 00000 |
25/32" | 1 3/16", 1 11/32", 1 9/16" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
1 11/64" | 1 9/16", 1 3/4", 1 31/32" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
1 9/16" | 1 31/32", 2 1/8", 2 11/32" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
1 31/32" | 2 11/32", 2 1/2", 2 3/4" | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
Miniature Wing-Handle Cam Latches
Designed for use in 1/2" dia. through holes. Select the turn direction of the latch when mounting the cam. Each latch comes with a straight cam and a reversible offset cam to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Thick. | Projection | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Each | |
Nickel-Plated Zinc—Dull | |||||||||||||
5/16" | 1/4", 9/16", 7/8" | 1/2" | 1" | 1/8" | 5/16" | 1 1/8" | 3/8" | 1 1/8" | 3/8" | Yes | Metal, Plastic | 0000000 | 000000 |
Chrome-Plated Zinc—Polished | |||||||||||||
5/16" | 1/4", 9/16", 7/8" | 1/2" | 1" | 1/8" | 5/16" | 1 1/8" | 3/8" | 1 1/8" | 3/8" | Yes | Metal, Plastic | 0000000 | 00000 |
Black Painted Zinc | |||||||||||||
5/16" | 1/4", 9/16", 7/8" | 1/2" | 1" | 1/8" | 5/16" | 1 1/8" | 3/8" | 1 1/8" | 3/8" | Yes | Metal, Plastic | 0000000 | 00000 |
Wing-Handle Cam Latches
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size. Select the turn direction when mounting the cam. Each latch comes with a straight cam and a reversible offset cam to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Thick. | Projection | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Each | |
Black Painted Zinc | |||||||||||||
1/4" | 3/8", 5/8", 7/8" | 3/4" | 1 1/2" | 3/16" | 5/8" | 1 1/4" | 5/8" | 1 1/8" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
9/16" | 5/8", 7/8", 1 1/8" | 3/4" | 1 1/2" | 3/16" | 5/8" | 1 1/4" | 5/8" | 1 1/8" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 0000 |
7/8" | 7/8", 1 1/8", 1 3/8" | 3/4" | 1 1/2" | 3/16" | 5/8" | 1 1/4" | 5/8" | 1 1/8" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 0000 |
Nickel-Plated Zinc—Dull | |||||||||||||
1/4" | 3/8", 5/8", 7/8" | 3/4" | 1 1/2" | 3/16" | 5/8" | 1 1/4" | 5/8" | 1 1/8" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 0000 |
9/16" | 5/8", 7/8", 1 1/8" | 3/4" | 1 1/2" | 3/16" | 5/8" | 1 1/4" | 5/8" | 1 1/8" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 0000 |
7/8" | 7/8", 1 1/8", 1 3/8" | 3/4" | 1 1/2" | 3/16" | 5/8" | 1 1/4" | 5/8" | 1 1/8" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 0000 |
Washdown Wing-Handle Cam Latches
These latches are IP65 rated for protection against dust, dirt, and washdowns. Select the turn direction when mounting the cam.
Style A comes with a straight cam and two nonreversible offset cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Thick. | Projection | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Black Painted Zinc | |||||||||||||||
A | 3/16" | 3/8", 11/16", 1 1/16" | 7/8" | 1 5/8" | 13/16" | 7/8" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 000000 |
A | 3/4" | 27/32", 1 5/32", 1 9/16" | 13/16" | 1 9/16" | 3/8" | 11/16" | 1 25/32" | 3/4" | 1 25/32" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
A | 1" | 1 3/32", 1 13/32", 1 13/16" | 13/16" | 1 9/16" | 3/8" | 11/16" | 1 25/32" | 3/4" | 1 25/32" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
A | 1 3/16" | 1 1/4", 1 9/16", 1 31/32" | 13/16" | 1 9/16" | 3/8" | 11/16" | 1 25/32" | 3/4" | 1 25/32" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
A | 1 1/2" | 1 21/32", 1 31/32", 2 11/32" | 13/16" | 1 9/16" | 3/8" | 11/16" | 1 25/32" | 3/4" | 1 25/32" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
A | 2" | 2 1/32", 2 11/32", 2 3/4" | 13/16" | 1 9/16" | 3/8" | 11/16" | 1 25/32" | 3/4" | 1 25/32" | 3/4" | Yes | Metal | IP65 | 000000000 | 00000 |
B | 35/64" | 5/8" | 7/8" | 1 1/4" | 3/16" | 13/16" | __ | __ | 1 3/4" | 3/4" | Yes | Metal | IP65, NEMA 4 | 00000000 | 0000 |
Chrome-Plated Zinc—Polished | |||||||||||||||
A | 3/16" | 9/16", 11/16", 1 1/8" | 7/8" | 2" | 1 1/8" | 7/8" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65, NEMA 4 | 00000000 | 00000 |
B | 35/64" | 5/8" | 7/8" | 1 1/4" | 3/16" | 13/16" | __ | __ | 1 3/4" | 3/4" | Yes | Metal | IP65, NEMA 4 | 00000000 | 0000 |
Tight-Hold T-Handle Keyed Alike Cam Locks
Also known as a compression cam lock, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface. Choose this lock if you need several locks that open with the same key. It comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.
For technical drawings and 3-D models, click on a part number.
Latching Distance | Handle | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Short | Long | Key Number | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Black Painted Zinc | ||||||||||||||
Half-Turn Counterclockwise to Open | ||||||||||||||
3/4" | 1"-1 5/8" | 2 1/8"-2 11/16" | CH751 | 7/8" | 3 1/4" | 7/8" | 1 5/16" | 1 11/16" | 3/4" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 000000 |
T-Handle Keyed Alike Cam Locks
The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key. The cam can be mounted to latch at a single point; for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors. You can install these locks with a round hole instead of the irregularly shaped standard cam hole. This is helpful if your panel is difficult to cut, or if it’s part of an existing structure.
Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. All have concealed mounting screws to prevent tampering.
Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.
To Order: For replacement keys, please specify key number.
For technical drawings and 3-D models, click on a part number.
Handle | Spindle | Straight Cam | Mount. Plate | Mount. | Mount. Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Key Number | For Through Hole Dia. | Lg. | Projection | Lg. | Square Size | Lg. | Wd. | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | For Use On | Each | |
Chrome-Plated Zinc—Polished | |||||||||||||||||||
Quarter-Turn Clockwise to Open | |||||||||||||||||||
1/8" | 3/8" | 92301 | 7/8" | 3 3/16" | 1 13/16" | 9/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | Yes | M4 | 2 | 4.2 | 1 1/2" | Metal Plastic Wood | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | |||||||||||||||||||
1/8" | 3/8" | 92301 | 7/8" | 3 3/16" | 1 13/16" | 9/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | Yes | M4 | 2 | 4.2 | 1 1/2" | Metal Plastic Wood | 0000000 | 00000 |
Replacement Key | 000000 | Each | 00000 |
Handle | Spindle | Straight Cam | Mount. Plate | Mount. | Mount. Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance Range | Key Number | For Through Hole Dia. | Lg. | Projection | Lg. | Square Size | Lg. | Wd. | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | For Use On | Each | |
Chrome-Plated Zinc—Polished | |||||||||||||||||||
Quarter-Turn Clockwise to Open | |||||||||||||||||||
2 15/16" | 3/8"-3 1/4" | 92302 | 7/8" | 3 3/16" | 1 13/16" | 3 3/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | No | M4 | 2 | 5.5 | 1 3/4" | Metal Plastic Wood | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | |||||||||||||||||||
2 15/16" | 3/8"-3 1/4" | 92302 | 7/8" | 3 3/16" | 1 13/16" | 3 3/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | No | M4 | 2 | 5.5 | 1 3/4" | Metal Plastic Wood | 0000000 | 00000 |
Replacement Key | 000000 | Each | 00000 |
Washdown T-Handle Keyed Alike Cam Locks
These locks are IP65 rated for protection against dust, dirt, and washdowns. Choose them if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with one straight and two nonreversible offset cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Handle | Offset Cam | Replacement Keys | |||||||||||||
For Max. Thick. | Latching Distance | Key Number | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | Each | ||
Black Painted Zinc (Black Nylon Plastic Handle) | |||||||||||||||
5/16" | 11/16", 13/16", 1 1/16" | EK333 | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 000000 | 00000000 | 00000 |
Chrome-Plated Zinc—Polished | |||||||||||||||
5/16" | 11/16", 13/16", 1 1/16" | EK333 | 7/8" | 3 1/16" | 13/16" | 1 9/16" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 00000 | 00000000 | 0000 |
Washdown Squeeze-Release T-Handle Keyed Alike Cam Locks
In addition to an IP65 rating for low-pressure washdown environments, this lock has a squeeze-release handle to prevent accidental opening when unlocked. It's good for use in areas with strong vibration. Choose this lock if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Straight Cam | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Max.Thick. | Latching Distance | For Through Hole Dia. | Handle Projection | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Key Number | Each | |
Zinc (Black and Red Nylon Plastic Handle) | |||||||||||
Quarter-Turn Clockwise to Open | |||||||||||
1/4" | 1/2" | 13/16" | 1 11/16" | 2" | 13/16" | Yes | Metal, Wood | IP65 | 421527 | 0000000 | 000000 |
T-Handle Keyed Cam Locks
Choose these locks if you need locks that each open with a different key. The cam can be mounted to latch at a single point; for additional strength, position it to drive a bar or rod into as many as two additional latch points. It's the type of latch used with three-point locking systems on filing cabinet doors. Install these locks with a round hole instead of the irregularly shaped standard cam hole. This is helpful if your panel is difficult to cut, or if it’s part of an existing structure.
Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. All have concealed mounting screws to prevent tampering.
Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.
To Order: For replacement keys, please specify key number.
For technical drawings and 3-D models, click on a part number.
Handle | Spindle | Straight Cam | Mounting Plate | Mounting | Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Projection | Lg. | Square Size | Lg. | Wd. | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | For Use On | Each | |
Chrome-Plated Zinc—Polished | ||||||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||||||
1/8" | 3/8" | 7/8" | 3 3/16" | 1 13/16" | 9/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | Yes | M4 | 2 | 4.2 | 1 1/2" | Metal, Plastic, Wood | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | ||||||||||||||||||
1/8" | 3/8" | 7/8" | 3 3/16" | 1 13/16" | 9/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | Yes | M4 | 2 | 4.2 | 1 1/2" | Metal, Plastic, Wood | 0000000 | 00000 |
Replacement Key | 000000 | Each | 00000 |
Handle | Spindle | Straight Cam | Mounting Plate | Mounting | Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Projection | Lg. | Square Size | Lg. | Wd. | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | For Use On | Each | |
Chrome-Plated Zinc—Polished | ||||||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||||||
2 15/16" | 5/16"-3 1/4" | 7/8" | 3 3/16" | 1 13/16" | 3 3/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | No | M4 | 2 | 5.5 | 1 3/4" | Metal, Plastic, Wood | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | ||||||||||||||||||
2 15/16" | 5/16"-3 1/4" | 7/8" | 3 3/16" | 1 13/16" | 3 3/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | No | M4 | 2 | 5.5 | 1 3/4" | Metal, Plastic, Wood | 0000000 | 00000 |
Replacement Key | 000000 | Each | 00000 |
T-Handle Master Keyed Cam Locks
Choose these locks if you need locks that each open with a different key and also open with a master key. The cam can be mounted to latch at a single point; for additional strength, position it to drive a bar or rod into as many as two additional latch points. These locks are often used with three-point locking systems on filing cabinet doors. You can install them in a round hole instead of the irregularly shaped standard cam hole, which is helpful if the material of the door is difficult to cut or part of an existing structure. Two keys are included; master keys are sold separately.
Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. All have concealed mounting screws to prevent tampering.
Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.
For technical drawings and 3-D models, click on a part number.
Handle | Spindle | Straight Cam | Mount. Plate | Mount. | Mount. Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Master Key No. | For Through Hole Dia. | Lg. | Proj. | Lg. | Square Size | Lg. | Wd. | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | For Use On | Each | |
Chrome-Plated Zinc—Polished | |||||||||||||||||||
Quarter-Turn Clockwise to Open | |||||||||||||||||||
1/8" | 3/8" | 92 | 7/8" | 3 3/16" | 1 13/16" | 9/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | Yes | M4 | 2 | 4.2 | 1 1/2" | Metal Plastic Wood | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | |||||||||||||||||||
1/8" | 3/8" | 92 | 7/8" | 3 3/16" | 1 13/16" | 9/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | Yes | M4 | 2 | 4.2 | 1 1/2" | Metal Plastic Wood | 0000000 | 00000 |
Handle | Spindle | Straight Cam | Mount. Plate | Mount. | Mount. Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Master Key No. | For Through Hole Dia. | Lg. | Proj. | Lg. | Square Size | Lg. | Wd. | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | For Use On | Each | |
Chrome-Plated Zinc—Polished | |||||||||||||||||||
Quarter-Turn Clockwise to Open | |||||||||||||||||||
2 15/16" | 3/8"-3 1/4" | 92 | 7/8" | 3 3/16" | 1 13/16" | 3 3/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | No | M4 | 2 | 5.5 | 1 3/4" | Metal Plastic Wood | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | |||||||||||||||||||
2 15/16" | 3/8"-3 1/4" | 92 | 7/8" | 3 3/16" | 1 13/16" | 3 3/16" | 5/16" | 1 7/16" | 5/8" | 2 5/16" | 1 3/16" | No | M4 | 2 | 5.5 | 1 3/4" | Metal Plastic Wood | 0000000 | 00000 |
Washdown Wing-Handle Padlockable Cam Latches
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated. They come with different cams to accommodate different latching distances.
Latches with four nonreversible offset cams work with padlocks that have a 1/4" shackle diameter. They have a set turn direction.
Latches with one straight cam and two nonreversible offset cams accommodate padlocks with 3/16" and 3/8" shackle diameters. Select the turn direction of the latch when mounting the cam.
For technical drawings and 3-D models, click on a part number.
Handle | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Thick. | Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Turn Direction | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Four Nonreversible Offset Cams | ||||||||||||||
Black Powder-Coated Zinc | ||||||||||||||
7/32" | 15/16", 1 3/16", 1 7/16", 1 21/32" | 7/8" | 2 3/16" | 1" | 15/16" | 1/4" | 1 3/4" | 3/4" | Quarter-Turn Clockwise to Open | Yes | Metal | IP65, NEMA 4 | 00000000 | 000000 |
7/32" | 15/16", 1 3/16", 1 7/16", 1 21/32" | 7/8" | 2 3/16" | 1" | 15/16" | 1/4" | 1 3/4" | 3/4" | Quarter-Turn Counterclockwise to Open | Yes | Metal | IP65, NEMA 4 | 00000000 | 00000 |
One Straight Cam and Two Nonreversible Offset Cams | ||||||||||||||
Black Painted Zinc | ||||||||||||||
5/16" | 11/16", 13/16", 1 1/16" | 7/8" | 2" | 1/2" | 13/16" | 3/16", 3/8" | 1 3/4" | 3/4" | Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | Yes | Metal | IP65 | 00000000 | 00000 |