McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    8 Products

    T-Handle Key Sets

    Image of Product. Front orientation. T-Handle Keys. T-Handle Key Sets.
    Keep a selection of top-quality T-handle keys on hand, so you always have the size you need. They're perfect for cranking screws in large machinery, such as engines and CNC mills. A wide handle gives you maximum leverage, and a long shaft reaches into deep pockets. The shaft is permanently bonded to the handle for a secure hold that won't break under high torque. To prevent slipping, these T-handle keys are precision manufactured to tight tolerances for an exact fit. Made of hardened steel, they'll last a lifetime in your tool kit.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Cushion Grip—Avoid sore, blistered fingers when completing lengthy projects. These handles have a plastic coating that absorbs pressure for extra comfort.
    No. of
    Pieces
    Includes
    Grip
    Style
    Relative Lg.
    Each
    Torx
     
    Chrome-Plated Steel
    7T9 Torx T-Handle Key (4 15/16" O'all Lg.), T10 Torx T-Handle Key (4 15/16" O'all Lg.), T15 Torx T-Handle Key (9" O'all Lg.), T20 Torx T-Handle Key (9 1/4" O'all Lg.), T25 Torx T-Handle Key (9 1/4" O'all Lg.), T27 Torx T-Handle Key (9 1/4" O'all Lg.), T30 Torx T-Handle Key (9 1/4" O'all Lg.)CushionStandard, Long6963A58000000
     

    Screw-Holding Torque-Limiting Key Sets

    Image of Product. Front orientation. Contains Inset. Torque-Limiting Keys.  Screw-Holding Torque-Limiting Key Sets.
    When you've only got one free hand to fasten, reach for these keys. A retaining ring on the tip grips screws securely so they won't fall off as you tighten. These sets are useful when working above crevices that screws could slip into or when fastening tiny screws, such as those on carbide inserts. The small handle prevents you from generating too much torque when turning a fastener.
    Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.
    No. of
    Pieces
    Includes
    Material
    Handle
    Material
    Screw-Holding
    Mechanism
    Container
    Type
    Each
    Torx
     
    T-Handle
    7T6 Torx T-Handle Key (2 3/4" O'all Lg.)
    T7 Torx T-Handle Key (2 3/4" O'all Lg.)
    T8 Torx T-Handle Key (3" O'all Lg.)
    T9 Torx T-Handle Key (3" O'all Lg.)
    T10 Torx T-Handle Key (3" O'all Lg.)
    T15 Torx T-Handle Key (3 1/8" O'all Lg.)
    T20 Torx T-Handle Key (3 1/8" O'all Lg.)
    Black-Oxide SteelPlasticRetaining RingMetal Stand7904A25000000
     

    T-Handle Keys

    Image of Product. Front orientation. T-Handle Keys. T-Handle Keys, Cushion Grip.

    Cushion Grip

    Crank screws in large, heavy duty machinery, such as engines and CNC mills. A wide handle gives you maximum leverage, and a long shaft reaches into deep pockets. The shaft is permanently bonded to the handle for a secure hold that won't break under high torque. To prevent slipping, these T-handle keys are precision manufactured to tight tolerances for an exact fit. They're made of hardened steel or stainless steel to last a lifetime in your tool kit.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Cushion Grip—Avoid sore, blistered fingers when completing lengthy projects. These handles have a plastic coating that absorbs pressure for extra comfort.
    Standard Length
    Drive
    Size
    Grip
    Style
    Overall
    Lg.
    Each
    Torx
     
    Chrome-Plated Steel
    T9Cushion4 15/16"6963A1900000
     

    Torque-Limiting Key Sets

    Image of Product. Front orientation. Torque-Limiting Keys. Torque-Limiting Key Sets, L-Key.
    Image of Product. Front orientation. Torque-Limiting Keys. Torque-Limiting Key Sets, T-Handle.

    L-Key

    T-Handle

    The assorted keys in these sets have a small handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.
    Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.
    Black Phosphate-Coated Steel—These keys resist rust in most wet and outdoor applications, however, they won't hold up to salt water and chemicals.
    No. of
    Pieces
    Includes
    Shaft
    Lg.
    Material
    Handle
    Material
    Container
    Type
    Each
    Torx
     
    L-Key
    7T6 Torx L-Key (2 7/8" O'all Lg.)
    T7 Torx L-Key (2 7/8" O'all Lg.)
    T8 Torx L-Key (2 7/8" O'all Lg.)
    T9 Torx L-Key (2 7/8" O'all Lg.)
    T10 Torx L-Key (3" O'all Lg.)
    T15 Torx L-Key (3" O'all Lg.)
    T20 Torx L-Key (3" O'all Lg.)
    1 1/2"Black Phosphate-Coated SteelRubberPlastic Stand7974A111000000
     
    T-Handle
    7T6 Torx T-Handle Key (2 3/4" O'all Lg.)
    T7 Torx T-Handle Key (2 3/4" O'all Lg.)
    T8 Torx T-Handle Key (2 15/16" O'all Lg.)
    T9 Torx T-Handle Key (2 15/16" O'all Lg.)
    T10 Torx T-Handle Key (2 15/16" O'all Lg.)
    T15 Torx T-Handle Key (3 1/8" O'all Lg.)
    T20 Torx T-Handle Key (3 1/8" O'all Lg.)
    Black-Oxide SteelPlasticMetal Stand7273A6100000
     

    Torque-Limiting Keys

    Image of Product. L-Key. Front orientation. L-Key. Torque-Limiting Keys.

    L-Key

    Image of Product. T-Handle. Front orientation. T-Handle. Torque-Limiting Keys.

    T-Handle

    Often used to install carbide inserts in cutting tools, these keys have a small handle that prevents you from generating too much torque when turning a fastener.
    Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.
    Black Phosphate-Coated Steel—These keys resist rust in most wet and outdoor applications, however, they won't hold up to salt water and chemicals.
    Lg.
    Drive
    Size
    Overall
    Shaft
    Material
    Handle
    Material
    Each
    Torx
     
    L-Key
    T92 7/8"1 1/2"Black Phosphate-Coated SteelRubber7974A31500000
     
    T-Handle
    T92 15/16"1 5/8"Black-Oxide SteelPlastic7273A540000
     

    Screw-Holding Torque-Limiting Keys

    Image of Product. Front orientation. Contains Inset. Torque-Limiting Keys.  Screw-Holding Torque-Limiting Keys.
    When you've only got one free hand to fasten, reach for these keys. A retaining ring on the tip grips screws securely so they won't fall off as you tighten. They're useful when working above crevices that screws could slip into or when fastening tiny screws, such as those on carbide inserts. The small handle prevents you from generating too much torque when turning a fastener.
    Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.
    Lg.
    Drive
    Size
    Overall
    Shaft
    Material
    Handle
    Material
    Screw-Holding
    Mechanism
    Each
    Torx
     
    T-Handle
    T93"1 5/8"Black-Oxide SteelPlasticRetaining Ring4147A1800000
     
    back to top