For Slot Width For Slot Width |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Component Component |
|---|
|
Finish Finish |
|---|
|
Load Capacity Load Capacity |
|---|
|
|
T-Slot Fixture Plates
These plates have three T-slots for use with T-slot nuts, bolts, and setup studs. There is a slot along each side of the plate for mounting with clamps.
Aluminum plates are lightweight and have mild corrosion resistance. Iron plates are heavy duty for long term use.
For technical drawings and 3-D models, click on a part number.
Fixturing Tables
Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.
Tables have removable plates that are precision ground to a tight tolerance for accurate positioning. Holes in a grid pattern and slots between the plates support a variety of clamps or workholding setups.
Overall | Slots | Plates | Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Load Capacity, lbs. | No. of | Wd. | Ctr.-to-Ctr. | No. of | Wd. | Thick. | No. per Plate | Dia. | Ctr.-to-Ctr. | Flatness Tolerance | Material | Plate Material | Features | Each | |
| 38" | 22" | 36" | 2,000 | 2 | 1 3/4" | 8" | 3 | 6 1/4" | 5/8" | 57 | 5/8" | 2" | 0.012" per 3 ft. | Steel | Nitride-Coated Steel | Leveling Feet | 0000000 | 000000000 |
| 47" | 38" | 36" | 5,000 | 5 | 1 3/4" | 8" | 6 | 6 1/4" | 5/8" | 57 | 5/8" | 2" | 0.012" per 3 ft. | Steel | Nitride-Coated Steel | Leveling Feet | 0000000 | 00000000 |
| 78" | 38" | 36" | 5,500 | 9 | 1 3/4" | 8" | 10 | 6 1/4" | 5/8" | 57 | 5/8" | 2" | 0.012" per 3 ft. | Steel | Nitride-Coated Steel | Leveling Feet | 0000000 | 00000000 |
| Replacement Plate | 0000000 | Each | 0000000 |
Hold-down clamps secure work anywhere on table's surface. The arm slides up and down freely so the clamp can be quickly moved into position. Once in place, use the handle for final tightening.
Clamping Surface | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Clamping Clearance | Reach | Holding Capacity, lbs. | For Hole Size | Type | Material | Texture | Body | Handle | Each | |
| 8 1/2" | 4" | 400 | 5/8" | Swivel Pad | Steel | Smooth | Steel | Steel | 0000000 | 000000 |
Right-angle brackets hold work at a precise 90° angle.
Slots | Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Lg. | Wd. | No. of | Dia. | Ctr.-to-Ctr. | Material | Each | |
| 3 5/8" | 1 3/16" | 1 5/8" | 1 | 2" | 5/8" | 1 | 5/8" | __ | Black-Oxide Steel | 0000000 | 000000 |
| 3 5/8" | 1 3/16" | 3 5/8" | 1 | 2" | 5/8" | 3 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 00000 |
| 6" | 1 3/16" | 3 5/8" | 1 | 5" | 5/8" | 3 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 00000 |
| 6" | 1 3/16" | 7 5/8" | 1 | 5" | 5/8" | 7 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 00000 |
| 6" | 2" | 12" | 1 | 5" | 5/8" | 11 | 5/8" | 1" | Black-Oxide Steel | 0000000 | 000000 |
Straightedge stops mount to the table to create a reliable straightedge for alignment.
Toggle clamp mounting plates let you position a toggle clamp anywhere on the table.
Plate | Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Thread Size | Stud Dia. | Material | Each | |
| 2 3/4" | 2 3/8" | 5/8" | 4, 4 | M5, M6 | 5/8" | Steel | 0000000 | 000000 |
 2" Lg.×2" Wd.×10" Ht. Fixturing Square |  4" Lg.×4" Wd.×4" Ht. Fixturing Square | |
 6" Lg.×2" Wd.×12" Ht. Fixturing Square | ||
 6" Lg.×2" Wd.×12" Ht. Fixturing Square |  6" Lg.×2" Wd.×12" Ht. Fixturing Square | |
Fixturing squares elevate workpieces or position clamps and other fixture components. Use them individually or stack multiple.
Slots | Holes | Tolerance | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Lg. | Wd. | Ctr.-to-Ctr. | Plate Thick. | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Wt., lbs. | Squareness per 4" | Parallel | Material | Each | |
| 2" | 2" | 10" | __ | __ | __ | __ | 1/2" | 20 | 5/8" | 1" | __ | 5 | 0.001" | 0.002" | Steel | 0000000 | 000000 |
| 4" | 4" | 4" | 2 | 2" | 5/8" | 2" | 1/2" | 21 | 5/8" | 2" | 1 7/16" | 8 | 0.001" | 0.002" | Steel | 0000000 | 000000 |
| 4" | 4" | 8" | 2 | 2" | 5/8" | 2" | 1/2" | 39 | 5/8" | 2" | 1 7/16" | 13 | 0.001" | 0.002" | Steel | 0000000 | 000000 |
| 4" | 4" | 12" | 2 | 2" | 5/8" | 2" | 1/2" | 57 | 5/8" | 2" | 1 7/16" | 18 | 0.001" | 0.002" | Steel | 0000000 | 000000 |
| 6" | 2" | 12" | 2 | 4" | 5/8" | __ | 15/32" | 26 | 5/8" | 1" | 1" | 6.4 | 0.002" | 0.006" | Iron | 0000000 | 000000 |
Side clamps apply pressure to hold work from the side.
| Lg. | Ht. | Stud Dia. | Material | Spindle Material | Each | |
| 3 1/2" | 2" | 5/8" | Black-Oxide Steel | Aluminum | 0000000 | 000000 |
Risers hold components above the surface of the table. A 5/8” hole at the top lets you attach a component, such as a V-block, to the riser.
V-blocks support round material and raise it off the table. Pivoting V-blocks conform to the shape of your workpiece, so they're good for holding round workpieces of different diameters.
Fasteners connect components to each other or to the table.
Thread | Head | Drive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shoulder Lg. | Size | Lg. | Dia. | Ht. | Lg. | Size | Style | Material | Includes | Pkg. Qty. | Each | |
Shoulder Screw—5/8” Shoulder Dia. (-0.001” to 0”) | ||||||||||||
| 1/2" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 00000 |
| 3/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
| 7/8" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
| 1" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
| 1 1/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 0000000 | 0000 |
Ball-Lock Screw—5/8” Stud Dia. | ||||||||||||
| __ | __ | __ | 7/8" | __ | 7/8"-1 1/8" | 1/4" | Hex | Steel | __ | __ | 0000000 | 00000 |
| Pkg. | ||||||||||||
| __ | __ | __ | 7/8" | __ | 7/8"-1 1/8" | 1/4" | Hex | Steel | __ | 10 | 0000000 | 000000 |
T-Slot Fixturing Tables
Mount workpiece holders, light machinery, collaborative robots, and other components onto these tables to create custom workspaces, no drilling or tapping required. Fasten equipment to tables by sliding T-slot nuts, bolts or setup studs into the T-shaped gaps. Tables have adjustable feet, so you can compensate for uneven floors and create a stable base. Store tools and accessories on the bottom shelf. These table are aluminum, so they’re lightweight and corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Overall | Shelves | T-Slots | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Capacity, lbs. | Type | Capacity, lbs. | Clearance | No. of | Wd. | Ctr.-to-Ctr. | Mounting Slot Ht. | Parallel Tolerance | Plate Material | Plate Thickness | Features | Each | |
| 39 3/8" | 19 3/4" | 29 1/2" | 495 | Fixed | 55 | 17 3/4" | 10 | 5/16" | 2" | 1/2" | Not Rated | Aluminum | 0.5" | Leveling Feet | 0000000 | 000000000 |
| 59 1/8" | 29 1/2" | 29 1/2" | 1,045 | Fixed | 165 | 17 3/4" | 15 | 5/16" | 2" | 1/2" | Not Rated | Aluminum | 0.5" | Leveling Feet | 0000000 | 00000000 |
| 59 1/8" | 39 3/8" | 29 1/2" | 1,045 | Fixed | 165 | 17 3/4" | 20 | 5/16" | 2" | 1/2" | Not Rated | Aluminum | 0.5" | Leveling Feet | 0000000 | 00000000 |
T-Slot Blocks
Mount these versatile blocks to any flat surface for machine table-style T-slot clamping. They can also be used on a machine table to clamp parts at specific angles or add more total clamping points. Secure the block to your table using the slot for a 5/8" fixture key (not included) on the bottom of the block. Tapped holes on the top let you attach clamps or thread in screws to use as workstops.
Right-angle blocks are a good choice for clamping parts from the side.
T-Slots | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Wd. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | No. of Holes | Hole Thread Size | Slot Wd. | Material | Each | |
Flat | ||||||||||||
| 5" | 2 1/4" | 1 3/4" | 1 | 3/8" | __ | __ | 1 | 5/16"-18 | 5/16" | Aluminum | 0000000 | 000000 |
| 5" | 3 1/4" | 1 3/4" | 4 | 3/8" | 2 5/32" | 1 1/4" | 2 | 5/16"-18 | 5/16" | Aluminum | 0000000 | 000000 |
| 7 1/4" | 2 3/4" | 2" | 1 | 5/8" | __ | __ | 1 | 1/2"-13 | 1/2" | Aluminum | 0000000 | 00000 |
| 7 1/4" | 5 1/2" | 2" | 4 | 5/8" | 2 3/4" | 3" | 2 | 1/2"-13 | 1/2" | Aluminum | 0000000 | 000000 |
Right Angle | ||||||||||||
| 3 1/4" | 2" | 2 1/2" | 2 | 3/8" | 1" | __ | 1 | 5/16"-18 | __ | Aluminum | 0000000 | 00000 |
| 4" | 2 1/4" | 3 1/2" | 2 | 5/8" | 1 1/2" | __ | 1 | 1/2"-13 | __ | Aluminum | 0000000 | 00000 |
Fine-Adjust Cross-Slide Tables
Precisely position work on X- and Y-axes using the handles.
Tilting tables position work at any angle up to 90°.
50-lb. capacity tables have a keyway for accurately positioning the table on your machine.
150-lb. capacity tables have handles at both ends so you can position work from either side.
Table | Base | Max. Travel | X-Axis T-Slots | Y-Axis T-Slots | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Lg. | Wd. | X-Axis | Y-Axis | X- and Y-Axis Adjustment Dial Graduations | Keyway Size | Overall Ht. | No. of | Wd. | Ctr.-to-Ctr. | No. of | Wd. | Ctr.-to-Ctr. | Flatness Tolerance | Material | Mounting Fasteners Included | Each | |
Standard 50-lb. Capacity | |||||||||||||||||||
| 10" | 6" | 6 3/8" | 7 5/8" | 6" | 4" | 0.001" | 5/8" | 4 3/8" | 1 | 7/16" | __ | 3 | 7/16" | 2 1/2" | 0.001" | Iron | No | 000000 | 0000000 |
Standard 150-lb. Capacity | |||||||||||||||||||
| 18 5/8" | 6" | 7 1/8" | 12" | 12" | 8" | 0.001" | __ | 5 1/4" | 2 | 1/2" | 2 3/8" | __ | __ | __ | 0.002" | Iron | No | 0000000 | 000000 |
Tilting 50-lb. Capacity | |||||||||||||||||||
| 12" | 6" | 5" | 9" | 8" | 4" | 0.001" | 5/8" | 4 5/8" | 1 | 7/16" | __ | 3 | 7/16" | 3" | 0.001" | Iron | No | 000000 | 00000000 |
Fine-Adjust Rotary Cross-Slide Tables
Rotate work 360° and precisely position it on X- and Y-axes by turning the handles. Use the keyway to accurately position the table on your machine.
Tilting tables position work at any angle up to 90°.
Base | Max. Travel | T-Slots | Rotation Graduations | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Table Dia. | Load Capacity, lbs. | Lg. | Wd. | X-Axis | Y-Axis | X- and Y-Axis Adjustment Dial Graduations | Keyway Size | Overall Ht. | No. of | Wd. | Center Bore Dia. | Adjustment Dial | Table | Flatness Tolerance | Material | Each | |
Standard | |||||||||||||||||
| 8" | 50 | 6 1/4" | 7 1/2" | 4" | 4" | 0.001" | 5/8" | 5 1/2" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 000000000 |
| 10" | 50 | 6 1/4" | 7 1/2" | 4" | 4" | 0.001" | 5/8" | 5 3/8" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 00000000 |
Tilting | |||||||||||||||||
| 8" | 50 | 5" | 9" | 4" | 4" | 0.001" | 5/8" | 5" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 00000000 |
| 10" | 50 | 5" | 9" | 4" | 4" | 0.001" | 5/8" | 5 3/4" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.001" | Iron | 000000 | 00000000 |
Fine-Adjust Rotary Tables
Turn the handles to rotate work 360°. These tables can be mounted horizontally or vertically and have a keyway for accurate positioning on your machine.
Base | T-Slots | Rotation Graduations | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Table Dia. | Load Capacity, lbs. | Lg. | Wd. | Keyway Size | Overall Ht. | No. of | Wd. | Center Bore Dia. | Adjustment Dial | Table | Flatness Tolerance | Material | Mounting Fasteners Included | Each | |
| 8" | 50 | 12" | 9 1/2" | 5/8" | 3 7/8" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.002" | Iron | No | 000000 | 0000000 |
| 10" | 50 | 12" | 9 1/2" | 5/8" | 3 7/8" | 2 | 5/8" | 1 5/8" | 1/20° | 1° | 0.002" | Iron | No | 000000 | 000000 |
T-Slot Cleaners
Scrape debris out of machine table T-slots.
For Slot Wd. | ||||
|---|---|---|---|---|
| Inch | Metric | Overall Lg. | Each | |
Black-Oxide Steel | ||||
| 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8" | 16 mm, 17 mm, 18 mm, 20 mm, 22 mm, 27 mm, 33 mm | 6" | 000000000 | 00000 |
Steel | ||||
| 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4" | 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 31 mm, 32 mm | 7 1/4" | 000000000 | 00000 |
T-Slot Covers
Prevent chips, debris, and small parts from falling into T-slots. These covers snap securely into T-slots but can be easily removed to change your table setup. They can be cut to length.
Drop-In Bar-Style Hold-Down Clamps for Workholding Tables
The base fits into holes on most workholding and welding tables for clamping anywhere on the work surface. The clamping arm slides freely along the bar for quick positioning. Use the handle for final tightening.
For Hole | |||||||
|---|---|---|---|---|---|---|---|
| Max. Clamping Clearance | Reach | Holding Capacity, lbs. | Size | Shape | Body Material | Each | |
| 8" | 4" | 650 | 16mm | Round | Steel | 0000000 | 000000 |