T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
For technical drawings and 3-D models, click on a part number.
Dust covers press into a T-slot to conceal wires and keep dust out. Plastic dust covers can be cut to size with scissors. Aluminum dust covers are more durable than plastic covers. They give aluminum rails a finished look. Clear dust covers let you see into the slot. They’re useful for LED lights used for in-slot lighting or inspecting cable and wire running through your rails.
Covers with static control prevent electrostatic discharge from building up, protecting sensitive electronic equipment.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Material | Safety Properties | Choose a Color | Each | |
| 1" | 2" | 3" | 0.256" | 6 | PVC Plastic | __ | 00000000 | 00000 | |
| 1 1/2" | 3" | 4 1/2" | 0.32" | 6 | PVC Plastic | __ | 0000000 | 0000 | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | Anodized Aluminum | __ | Silver | 0000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | Polypropylene Plastic | __ | Clear | 0000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | Polypropylene Plastic | Static Control | Black | 00000000 | 00000 |
| 20mm | 40mm | __ | 5mm | 6 | Polypropylene Plastic | __ | Black | 0000000 | 0000 |
| 20mm | 40mm | __ | 5mm | 6 | Polypropylene Plastic | Static Control | Black | 00000000 | 0000 |
| 20mm | 40mm | __ | 5mm | 6 | Nylon Plastic | __ | Gray | 0000000 | 0000 |
| 25mm | 50mm | __ | 6.5mm | 6 | PVC Plastic | __ | 0000000 | 0000 | |
| 30mm, 40mm | 60mm, 80mm | 120mm | 8mm | 6 | Polypropylene Plastic | __ | 00000000 | 0000 | |
| 45mm | 90mm | __ | 10mm | 6 | Anodized Aluminum | __ | Silver | 0000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 6 | Polypropylene Plastic | __ | 00000000 | 0000 | |
Wear strip covers slide into a T-slot to provide a slippery, abrasion-resistant surface. 90° angle covers create a side barrier that acts as a guide rail where there isn’t room for another rail. Wedge covers act as a ramp for items to slide on and off the surface of the rail.
Covers with static control prevent electrostatic discharge from building up, protecting sensitive electronic equipment.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg. | Projection | Edge Ht. | Material | Safety Properties | Mounting Fasteners Included | Color | Each | |
Flat | ||||||||||||
| 1", 25mm | 2", 50mm | 3" | 0.256" | 3 ft. | 3/16" | __ | UHMW Plastic | __ | __ | White | 00000000 | 000000 |
| 1", 25mm | 2", 50mm | 3" | 0.256" | 6 ft. | 3/16" | __ | UHMW Plastic | __ | __ | White | 0000000 | 00000 |
| 1 | 3" | 4 | 0.32" | 3 ft. | 1/4" | __ | UHMW Plastic | __ | __ | White | 000000000 | 00000 |
| 1 | 3" | 4 | 0.32" | 6 ft. | 1/4" | __ | UHMW Plastic | __ | __ | White | 000000000 | 00000 |
| 40mm | 80mm | 120mm | 8mm | 3 ft. | 1/4" | __ | UHMW Plastic | __ | __ | White | 00000000 | 00000 |
| 40mm | 80mm | 120mm | 8mm | 6 ft. | 1/4" | __ | UHMW Plastic | __ | __ | White | 00000000 | 00000 |
| 40mm | 80mm | 120mm | 8mm | 6 | 5/32" | __ | UHMW Plastic | Static Control | __ | Black | 00000000 | 00000 |
90° Angle | ||||||||||||
| 40mm | 80mm | 120mm | 8mm | 6 | 15/16" | 13/16" | UHMW Plastic | Static Control | __ | Black | 00000000 | 00000 |
Wedge | ||||||||||||
| 40mm | 80mm | 120mm | 8mm | 1 | 1/8" | __ | Nylon Plastic | __ | Yes | Black | 00000000 | 0000 |
Antislip covers add traction to a rail. They can be cut to size with scissors. Push them into a T-slot.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Projection | Material | Color | Each | |
6 ft. Lg. | ||||||||
| 1" | 2" | 3" | 0.256" | 1/8" | Plastic/Rubber Blend | Black | 000000000 | 000000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 5/32" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
| 25mm | 50mm | __ | 6.5mm | 5/32" | Plastic/Rubber Blend | Black | 00000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 3/16" | EPDM Rubber | Black | 0000000 | 00000 |
12 ft. Lg. | ||||||||
| 1" | 2" | 3" | 0.256" | 1/8" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 5/32" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
| 25mm | 50mm | __ | 6.5mm | 5/32" | Plastic/Rubber Blend | Black | 00000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 3/16" | EPDM Rubber | Black | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Bulb seals compress better than solid seals, but water can leak from the top or bottom when your door is ajar.
Inline wiper seals deflect water and dust when in motion.
Flexible seals can be cut to size with scissors. Press them into a T-slot.
Rigid seals quickly snap into a T-slot for a secure hold.
For Rail Ht. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Bulb Ht. | Offset | Required Door Gap | Flexibility | Color | Each | |
Inline | |||||||||||||
EPDM Rubber | |||||||||||||
| 1" | 2" | 3" | 0.256" | 6 | 3/8" | 11/32" | 1/4" | __ | 5/32" | Rigid | Black | 0000000 | 000000 |
| 1" | 2" | 3" | 0.256" | 6 | 1/2" | 1/4" | 3/16" | __ | 1/8" | Rigid | Black | 00000000 | 00000 |
| 1" | 2" | 3" | 0.256" | 6 | 3/4" | 9/16" | 3/8" | __ | 1/4" | Rigid | Black | 00000000 | 00000 |
| 1" | 2" | 3" | 0.256" | 6 | 3/4" | 5/8" | 9/16" | __ | 3/8" | Rigid | Black | 00000000 | 00000 |
| 1" | 2" | 3" | 0.256" | 6 | 15/16" | 27/32" | 3/4" | __ | 1/2" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/8" | 11/32" | 1/4" | __ | 5/32" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 1/2" | 1/4" | 3/16" | __ | 1/8" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 5/16" | 5/16" | __ | 1/4" | Flexible | Black | 000000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 9/16" | 3/8" | __ | 1/4" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 5/8" | 9/16" | __ | 3/8" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 15/16" | 27/32" | 3/4" | __ | 1/2" | Rigid | Black | 00000000 | 00000 |
Inline Wiper | |||||||||||||
EPDM Rubber | |||||||||||||
| 1" | 2" | 3" | 0.256" | 6 | 5/8" | 7/16" | 3/8" | __ | __ | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 5/8" | 7/16" | 3/8" | __ | __ | Rigid | Black | 00000000 | 00000 |
Offset | |||||||||||||
PVC Plastic/TPE Rubber | |||||||||||||
| 1 | 3", 60mm, 80mm | 4 | 0.32", 8mm | 6 1/2 | 1 3/16" | 1/2" | 1/4" | 7/8" | __ | Rigid | Gray | 00000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 6 1/2 | 1 1/2" | 15/32" | 1/4" | 1 1/8" | __ | Rigid | Gray | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Solid seals don’t hold water since they have no openings. However, they don’t compress as well as bulb and brush seals, so they require a precise door gap. They quickly snap into a T-slot for a secure hold.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Material | Color | Each | |
| 1" | 2" | 3" | 0.256" | 6 | 1/2" | 3/8" | EPDM Rubber | Black | 0000000 | 000000 |
| 1" | 2" | 3" | 0.256" | 6 | 5/8" | 9/16" | EPDM Rubber | Black | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | 1/2" | 3/8" | EPDM Rubber | Black | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | 5/8" | 9/16" | EPDM Rubber | Black | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Wiper seals deflect water and dust when in motion. They can be cut to size with scissors.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Material | Color | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 1/2 | 7/16" | 7/8" | Nitrile Rubber | Black | 000000000 | 000000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Brush seals fill gaps with their flexible bristles. Press them into a T-slot.
For Rail Ht. | Bristle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Lg. | Material | Material | Color | Each | |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 3 1/4 | 1/2" | 1 9/16" | 1 9/16" | Nylon Plastic | ABS Plastic | Black | 000000000 | 000000 |
Seals cover door gaps to keep out air and dust from rail end connections.
End-of-rail seals leave no gaps or crevices between rails mounted at a right angle, making them good for clean room environments and applications where you want a smooth, aesthetic look. Wedge them between two rails before fastening them together. You'll want to account for the 1.3 mm thickness of the seal before installing.
When connecting two rails, use a seal with two lips. When connecting three rails, you'll need a seal with one lip and a seal with two lips.
One Lip | Two Lips | |||||||
|---|---|---|---|---|---|---|---|---|
| For Rail Ht. | Lg. | Wd. | Material | Color | Each | Each | ||
Single Rail to Single Rail | ||||||||
| 30 mm × 30 mm | 1 3/16" | 1 3/16" | Nylon Plastic | Gray | 0000000 | 00000 | 0000000 | 00000 |
| 40 mm × 40 mm | 1 9/16" | 1 9/16" | Nylon Plastic | Gray | 0000000 | 0000 | 0000000 | 0000 |
Single Rail to Double Rail | ||||||||
| 30 mm × 60 mm | 2 3/8" | 1 3/16" | Nylon Plastic | Gray | 0000000 | 0000 | 0000000 | 0000 |
| 40 mm × 80 mm | 3 5/32" | 1 9/16" | Nylon Plastic | Gray | 0000000 | 0000 | 0000000 | 0000 |
Double Rail to Double Rail | ||||||||
| 60 mm × 60 mm | 2 3/8" | 1 3/16" | Nylon Plastic | Gray | 000000 | 00 | 0000000 | 0000 |
| 80 mm × 80 mm | 3 5/32" | 1 9/16" | Nylon Plastic | Gray | 000000 | 00 | 0000000 | 0000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Once installed, the gasket isn’t noticeable. However, the panel and gasket need to be installed before the structure is fully assembled. Press them into a T-slot.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
| 1", 25mm | 2", 50mm | 3", 75mm | 0.256", 6mm | 5 mm | 6 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
| 1", 25mm | 2", 50mm | 3", 75mm | 0.256", 6mm | 5 mm | 6 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 00000 |
| 1 | 3", 60mm, 80mm | 4 | 0.32", 8mm | 6 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 mm | 6 1/2 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 00000 |
| 20mm | 40mm | __ | 5mm | 3 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 5 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 6 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 00000000 | 00000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Once installed, the gasket isn’t noticeable. However, the panel and gasket need to be installed before the structure is fully assembled. Press them into a T-slot.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
| 40 mm | 80 mm | 120 mm | 8 mm | 6 mm | 6 1/2 | TPE Rubber | 0° to 155° | Durometer 60A | Medium Hard | Gray | 0000000 | 00000 |
| 40 mm | 80 mm | 120 mm | 8 mm | 6 mm | 6 1/2 | TPE Rubber | 0° to 155° | Durometer 60A | Medium Hard | Black | 0000000 | 0000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Quick-install panel gaskets can be installed after what you’re building is assembled, but they’re more visible than other panel gasket types.
For Rail Ht. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
| 45 mm | 90 mm | 10 mm | 10 mm | 6 1/2 | Polypropylene Plastic/TPE Rubber | 32° to 300° | Durometer 65A | Medium Hard | Black | 0000000 | 000000 |