T-Slot Framing Component T-Slot Framing Component |
---|
![]() | ![]() |
Structural Bracket | Fastener |
![]() | ![]() |
Pivot | Mounting Foot |
![]() | ![]() |
Hinge | Mounting Plate |
![]() | ![]() |
Roller Wheel | Handle |
![]() | |
Lock and Latch |
Material Material |
---|
|
|
Mounting Fastener Thread Size Mounting FastenerThread Size | Show |
---|
|
Mounting Fastener Thread Size Mounting FastenerThread Size | Hide |
---|
|
|
|
Concealed Bracket Style Concealed Bracket Style |
---|
![]() | ![]() |
Corner | Tabbed |
![]() | ![]() |
Straight | Plate Connector |
Corner Bracket Style Corner Bracket Style |
---|
![]() | ![]() |
Corner | Extended Corner |
![]() | ![]() |
Open Extended Gusset | Open Gusset |
![]() | ![]() |
Three-Way Outside Corner | Outside Corner |
Pivot Style Pivot Style |
---|
![]() |
Perpendicular |
![]() |
Locking Inline/Perpendicular |
Surface Bracket Style Surface Bracket Style |
---|
![]() | ![]() |
90° Angle | Tee |
![]() | ![]() |
Straight | Extended Straight |
Finish Finish |
---|
|
Fastener Head Style Fastener Head Style |
---|
![]() | Flanged Button |
Wheel Diameter Wheel Diameter |
---|
|
Pivot Type Pivot Type |
---|
|
Fastener Type Fastener Type |
---|
|
Mounting Fastener Drive Style Mounting FastenerDrive Style |
---|
|
Hinge Type Hinge Type |
---|
|
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
For technical drawings and 3-D models, click on a part number.
Corner, reducer, surface, and adapter brackets connect rails without machining.
Extended brackets have more connection points for stronger connections than standard brackets.
Open and closed gusset brackets are reinforced to limit sway for more structural stability than corner brackets.
For Rail Ht. | Lg. | Mounting Fasteners Included | Material | Each | |
Silver | |||||
---|---|---|---|---|---|
Corner | |||||
20mm | 3/4" | Yes | Anodized Aluminum | 00000000 | 00000 |
Extended Corner | |||||
20mm | 1 5/8" | Yes | Anodized Aluminum | 00000000 | 0000 |
Open Gusset | |||||
20mm | 3/4" | Yes | Anodized Aluminum | 00000000 | 0000 |
Open Extended Gusset | |||||
20mm | 1 5/8" | Yes | Anodized Aluminum | 00000000 | 0000 |
Black | |||||
Corner | |||||
20mm | 3/4" | Yes | Powder-Coated Aluminum | 00000000 | 0000 |
Extended Corner | |||||
20mm | 1 5/8" | Yes | Powder-Coated Aluminum | 00000000 | 0000 |
Open Gusset | |||||
20mm | 3/4" | Yes | Anodized Aluminum | 00000000 | 0000 |
Corner, reducer, surface, and adapter brackets connect rails without machining.
Extended brackets have more connection points for stronger connections than standard brackets.
Open and closed gusset brackets are reinforced to limit sway for more structural stability than corner brackets.
For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
Silver | |||||
---|---|---|---|---|---|
Corner | |||||
40mm | 3/4" | Anodized Aluminum | Yes | 00000000 | 00000 |
Extended Corner | |||||
40mm | 1 5/8" | Anodized Aluminum | Yes | 00000000 | 00000 |
Open Gusset | |||||
40mm | 3/4" | Anodized Aluminum | Yes | 00000000 | 00000 |
Black | |||||
Corner | |||||
40mm | 3/4" | Anodized Aluminum | Yes | 00000000 | 0000 |
Extended Corner | |||||
40mm | 1 5/8" | Anodized Aluminum | Yes | 0000000 | 00000 |
Corner, reducer, surface, and adapter brackets connect rails without machining.
Outside corner and three-way outside corner brackets connect the ends of rails for a finished look. To install, tap the existing hole in the end of each rail and screw the bracket in.
Corner, reducer, surface, and adapter brackets connect rails without machining.
Extended brackets have more connection points for stronger connections than standard brackets.
For Rail Ht. | Lg. | Mounting Fasteners Included | Material | Each | |
Silver | |||||
---|---|---|---|---|---|
Straight | |||||
20mm | 1 1/2" | Yes | Anodized Aluminum | 00000000 | 00000 |
Extended Straight | |||||
20mm | 3" | Yes | Anodized Aluminum | 00000000 | 00000 |
90° Angle | |||||
20mm | 2 3/8" | Yes | Anodized Aluminum | 00000000 | 00000 |
Tee | |||||
20mm | 2 1/4" | Yes | Anodized Aluminum | 00000000 | 00000 |
Black | |||||
Straight | |||||
20mm | 1 1/2" | Yes | Powder-Coated Aluminum | 00000000 | 0000 |
Extended Straight | |||||
20mm | 3" | Yes | Powder-Coated Aluminum | 00000000 | 00000 |
90° Angle | |||||
20mm | 2 3/8" | Yes | Powder-Coated Aluminum | 00000000 | 00000 |
Tee | |||||
20mm | 2 1/4" | Yes | Powder-Coated Aluminum | 00000000 | 00000 |
Corner, reducer, surface, and adapter brackets connect rails without machining.
Extended brackets have more connection points for stronger connections than standard brackets.
For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
Silver | |||||
---|---|---|---|---|---|
Straight | |||||
40mm | 1 1/2" | Anodized Aluminum | Yes | 00000000 | 000000 |
Extended Straight | |||||
40mm | 3" | Anodized Aluminum | Yes | 00000000 | 00000 |
90° Angle | |||||
40mm | 3 1/8" | Anodized Aluminum | Yes | 00000000 | 00000 |
Tee | |||||
40mm | 3 1/8" | Anodized Aluminum | Yes | 00000000 | 00000 |
Black | |||||
Straight | |||||
40mm | 1 1/2" | Anodized Aluminum | Yes | 00000000 | 00000 |
Extended Straight | |||||
40mm | 3" | Anodized Aluminum | Yes | 00000000 | 00000 |
90° Angle | |||||
40mm | 3 1/8" | Anodized Aluminum | Yes | 00000000 | 00000 |
Tee | |||||
40mm | 3 1/8" | Anodized Aluminum | Yes | 00000000 | 00000 |
Braces create sturdier 90° connections than other brackets.
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required.
For Rail Ht. | Lg. | Color | Material | Mounting Fasteners Included | Pkg. Qty. | Pkg. | |
20mm | 15/16" | Silver | Aluminum | Yes | 2 | 00000000 | 000000 |
Braces create sturdier 90° connections than other brackets.
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required.
For Rail Ht. | Lg. | Color | Material | Mounting Fasteners Included | Pkg. Qty. | Pkg. | |
40mm | 15/16" | Silver | Aluminum | Yes | 2 | 00000000 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Straight concealed brackets slide into T-slots.
Concealed brackets mount internally and stay out of sight once installed.
Corner concealed brackets slide into T-slots.
For Rail Ht. | |||||||
---|---|---|---|---|---|---|---|
Single | Double and Quad | Triple | Color | Material | Mounting Fasteners Included | Each | |
1" | 2" | 3" | Silver | Zinc | Yes | 00000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Tabbed concealed brackets require one tapped hole to install the connector and one drilled access hole in the mating rail to secure the connection.
For Rail Ht. | ||||||||
---|---|---|---|---|---|---|---|---|
Single | Double and Quad | Color | Material | Required Tap Thread Size | Required Access Hole Dia. | Mounting Fasteners Included | Each | |
20mm | 40mm | Silver | Zinc-Plated Steel | M5 | 3mm | Yes | 0000000 | 00000 |
Concealed brackets mount internally and stay out of sight once installed.
Plate connector concealed brackets have a screw on one side and a T-slot nut on the other. Tap a hole in the end of one rail and thread in the screw. Then slide the T-slot nut into the slot of the other rail.
For Rail Ht., mm | ||||||
---|---|---|---|---|---|---|
Single | Double and Quad | Color | Material | Mounting Fasteners Included | Each | |
30 | 60 | Silver | Aluminum | Yes | 00000000 | 00000 |
Screws and nuts secure brackets and other accessories to rails.
For technical drawings and 3-D models, click on a part number.
End-feed fasteners slide into the end of the rail to attach components.
Use double and triple fasteners to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.
For Rail Ht. | Mounting | ||||||||
---|---|---|---|---|---|---|---|---|---|
Single | Double and Quad | Color | Material | Hole Location | Fastener Thread Size | Fastener Thread Lg. | Pkg. Qty. | Pkg. | |
Single Nut with Flanged-Button Head | |||||||||
20mm | 40mm | Black | Zinc-Plated Steel | Offset | M5 | 8mm | 4 | 00000000 | 00000 |
20mm | 40mm | Silver | 304 Stainless Steel | Offset | M5 | 8mm | 4 | 00000000 | 0000 |
Double Nut with Flanged Button-Head | |||||||||
20mm | 40mm | Black | Zinc-Plated Steel | Offset | M5 | 8mm | 4 | 00000000 | 0000 |
Triple Nut with Flanged-Button Head | |||||||||
20mm | 40mm | Black | Zinc-Plated Steel | Center, Offset | M5 | 8mm | 4 | 00000000 | 0000 |
Pivots provide smooth motion at the junction between two T-slotted rails.
Locking inline/perpendicular pivots have a handle that locks in place to position parts or hold doors and lids open. Align the tabs to install the pivot at the end of the rail. The two tabs parallel to the T-Slot must be removed prior to installing the pivot perpendicular to or inline with the rail.
For technical drawings and 3-D models, click on a part number.
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
For technical drawings and 3-D models, click on a part number.
End cap mounting plates have a threaded hole to accept attachments such as mounting feet and stem casters.
Black | |||||
---|---|---|---|---|---|
For Rail Ht. | For Stem Thread Size | Material | Mounting Fasteners Included | Each | |
For Double Rails | |||||
40mm | M6 × 1mm | Powder-Coated Zinc | Yes | 00000000 | 000000 |
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.
For technical drawings and 3-D models, click on a part number.
Slide drawers, panels, and doors with these tracks and rollers.
For technical drawings and 3-D models, click on a part number.
Roller wheels can be used to roll frames, panels, and other components along the length of the T-slot.
For Rail Ht. | Wheel | |||||||
---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Dia. | Material | Color | Material | Mounting Fasteners Included | Each | |
Rail-to-Panel | ||||||||
20mm | 40mm | 3/4" | Plastic | Black | Plastic | Yes | 00000000 | 000000 |
Use hinges to add doors, lids, and machine guards to T-slotted framing.
For technical drawings and 3-D models, click on a part number.
Rail-to-rail hinges provide smooth motion at the junction between two rails.
Hinges with a nonremovable pin are reversible and work on left- and right-side doors.
For Rail Ht. | Color | Material | Mounting Fasteners Included | Each | |
Nonremovable Pin—Reversible | |||||
---|---|---|---|---|---|
20mm | Black | Plastic | Yes | 0000000 | 00000 |
Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.
Sure-grip pull handles have finger indentations for a more secure grip than other handles.
For Rail Ht. | |||||||
---|---|---|---|---|---|---|---|
Single | Double, Quad | Lg. | Projection | Mounting Fasteners Included | Color | Each | |
Sure-Grip Pull Handles | |||||||
Plastic | |||||||
20mm | 40mm | 5 5/8" | 1 7/8" | Yes | Black | 00000000 | 000000 |
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
Magnetic latches secure doors and panels with magnets. Rail-to-rail latches require a gap between the two rails so doors will close properly.
For technical drawings and 3-D models, click on a part number.
For Rail Ht | |||||||||
---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Color | Material | Wd. | Ht. | Required Door Gap | Mounting Fasteners Included | Each | |
Magnetic Rail-to-Rail Latches | |||||||||
45mm | 90mm | Black | Plastic | 2 1/8" | 1 9/16" | 3/16"-1/4" | Yes | 00000000 | 000000 |