A tensioner extends or retracts the conveyor pulley to adjust the tension on the conveyor belt.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Mounting with threaded holes in their base and IP69K certified for washdown environments, these bearings fit in tight spaces and are used in food-, beverage-, pharmaceutical-, and chemical-processing plants. They’re also known as tapped-base mounted ball bearings.

Use these UHMW bearings in wet, corrosive environments.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Use these bearings in corrosive environments and under water.

The tapered rollers in these bearings support large shafts at high static loads.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Use these bearings in corrosive environments and under water.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.