10 Gal. Tanks | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

85 Products

ASME-Code Compressed Air Storage Tanks

Horizontal

Horizontal with Mounting Plate

Vertical

These tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.

Tanks with mounting plate have a platform where you can secure motors, pumps, and other components.

Steel tanks are primed or powder coated for exterior corrosion resistance. Epoxy-lined steel tanks also resist interior corrosion that can result from moisture in your compressed air.

Stainless steel tanks are more corrosion resistant than steel tanks.

Safety regulations restrict sales to the listed jurisdictions/areas.

Note: Per ASME code, all tanks are water tested. Those made without a corrosion-resistant coating or material will have rust on the interior.

For technical drawings and 3-D models, click on a part number.

		Ports			Overall
Cap., gal.	Max. Pressure, psi	Total No. of	Gender	Sizes	Lg.	Dia.	Ht.	Wall Thick.	Temp. Range, °F	Cannot Be Sold To		Each
Horizontal
Primed Steel
10	200	7	Female	1/2 NPT Port (1 ea.) 3/4 NPT Port (4 ea.) 1 NPT Port (1 ea.) 1/2 NPT Drain Port (1 ea.)	23 3/4"	12"	14"	1/8"	-20° to 400°	__	0000000	0000000
Powder-Coated Steel
10	200	6	Female	1/2 NPT Port (3 ea.) 3/4 NPT Port (2 ea.) 1/4 NPT Drain Port (1 ea.)	30 5/8"	10"	11"	1/8"	-20° to 400°	__	0000000	000000
Epoxy-Lined Powder-Coated Steel
10	200	7	Female	1/2 NPT Port (1 ea.) 3/4 NPT Port (4 ea.) 1 1/2 NPT Port (1 ea.) 1/2 NPT Drain Port (1 ea.)	23 3/4"	12"	14"	1/8"	-20° to 400°	__	0000000	000000
316 Stainless Steel
10	200	7	Female	1/2 NPT Port (1 ea.) 3/4 NPT Port (4 ea.) 1 NPT Port (1 ea.) 1/2 NPT Drain Port (1 ea.)	25"	12"	14"	1/8"	-20° to 450°	Canada	0000000	00000000
Horizontal with Mounting Plate
Primed Steel
10	200	5	Female	3/4 NPT Port (3 ea.) 1 NPT Port (1 ea.) 1/2 NPT Drain Port (1 ea.)	23 3/4"	12"	15"	1/8"	-20° to 400°	__	0000000	000000
Powder-Coated Steel
10	200	6	Female	1/2 NPT Port (3 ea.) 3/4 NPT Port (2 ea.) 1/4 NPT Drain Port (1 ea.)	30 5/8"	10"	13"	1/8"	-20° to 400°	__	0000000	000000
Epoxy-Lined Powder-Coated Steel
10	200	5	Female	3/4 NPT Port (3 ea.) 1 NPT Port (1 ea.) 1/2 NPT Drain Port (1 ea.)	23 3/4"	12"	15"	1/8"	-20° to 400°	__	0000000	000000
Vertical
Powder-Coated Steel
10	200	5	Female	3/4 NPT Port (4 ea.) 1/2 NPT Drain Port (1 ea.)	__	10"	32"	1/8"	-20° to 650°	Canada	000000	000000

High-Pressure ASME-Code Compressed Air Storage Tanks

Horizontal

Able to withstand pressures up to 600 psi, these tanks store compressed air for use in high-pressure applications. They’re made of steel that's primed to resist exterior corrosion. Tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration. Safety regulations restrict sales to the listed jurisdictions/areas.

Note: Per ASME code, all tanks are water tested and will have rust on the interior.

For technical drawings and 3-D models, click on a part number.

		Ports			Overall
Cap., gal.	Max. Pressure, psi	Total No. of	Gender	Sizes	Lg.	Dia.	Ht.	Wall Thick.	Temp. Range, °F	Specifications Met	Cannot Be Sold To		Each
Horizontal
Gray Primed Steel
10	600	5	Female	3/4 NPT Port (3 ea.) 1 NPT Port (1 ea.) 1/2 NPT Drain Port (1 ea.)	24 1/4"	12"	14"	1/4"	-20° to 400°	ASME BPVC.VIII.1	Canada	0000000	000000000

Lightweight Compressed Air Storage Tanks

Tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.

They cannot be sold to New Jersey or Canada due to safety and pressure vessel regulations.

For technical drawings and 3-D models, click on a part number.

		Ports			Overall
Cap., gal.	Max. Pressure, psi	Total No. of	Gender	Sizes	Lg.	Dia.	Ht.	Wall Thick.	Temp. Range, °F	Cannot Be Sold To		Each
Horizontal
Fiberglass
10	150	4	Female	1/4 NPT Port (1 ea.) 3/4 NPT Port (2 ea.) 1/8 NPT Drain Port (1 ea.)	40 3/8"	9 1/4"	12"	1/8"	-20° to 150°	Canada, NJ	000000	000000000

Double-Wall Plastic Tanks

Shown Separated

No need for separate spill-control pallets or trays—comply with EPA regulations for storing hazardous liquids with just one tank. These tanks have two walls, so if the primary compartment ruptures, the secondary one will contain the leak. It can hold 110% of the primary tank's volume and will also protect it from damage in case of impact.

Made of polyethylene, these tanks can store a broader range of chemicals than steel double-wall tanks. The plastic contains UV inhibitors so they can be used outside.

These tanks have a flat space on top where you can mount a metering pump. Because these tanks meet NSF/ANSI 61 for drinking water, you can meter chemicals stored in them into your drinking water system.

For technical drawings and 3-D models, click on a part number.

Polyethylene Plastic
Cap., gal.	Wd.	Dp.	Ht.	Primary Compartment Opening (No. of)	Secondary Compartment Opening (No. of)	Color	Max. Temp., °F	Specifications Met	Includes		Each
10	14"	14"	22"	4" Fill Opening Dia. (1) 3/8" Opening Dia. (1) 2 NPT Female Opening (1)	1 NPT Female Opening (1)	Blue	130°	EPA 40 CFR 264.175 NSF/ANSI 61	Vented Fill Cap	0000000	0000000

Wall-Mount Plastic Easy-Drain Tanks

These tanks are often used as gravity-fed dispensers.

For technical drawings and 3-D models, click on a part number.

								Drain				Mounting Holes
Cap., gal.	Wd.	Dp.	Ht.	Thick.	Fill Opening Dia.	Grad. Marks	Color	Pipe Size	Gender	Bottom Slope Angle	Max. Temp., °F	No. of	Dia.	Mounting Fasteners Included	UV Protection	Includes		Each
Polyethylene Plastic
10	13"	13"	21 1/2"	1/4"	8"	1 gal.	White	1 1/4 NPT	Female	54°	120°	6	5/16"	No	UV Resistant	Vented Fill Cap	0000000	0000000

Replacement Polypropylene Plastic Fill Cap For 8" Fill Opening Dia.

0000000

Each

000000

Plastic Easy-Drain Tanks

Shown with
Optional Stand
with Mixer Mount

The seamless, heavy-wall construction makes these tanks durable and easy to clean. The bottom is sloped to ensure easy drainage.

Stands (sold separately) allow a 14 1/4" minimum clearance from the bottom of drain to the floor.

For technical drawings and 3-D models, click on a part number.

Tanks
						Drain							Stands		Stands with Mixer Mount
Cap., gal.	Dia.	Ht.	Thick.	Color	Clarity	Pipe Size	Gender	Material	Bottom Slope Angle	Max. Temp., °F		Each		Each		Each
Polyethylene Plastic
10	15 1/4"	18"	3/16"	White	Semi-Clear	1/2 NPT	Female	PVC Plastic	19°	140°	00000000	0000000	00000000	0000000	00000000	0000000

Pressurized Liquid Dispensing Tanks

Attach a compressed air source to pressurize liquids for dispensing and spraying. Tanks have a dip tube that draws liquid from the bottom of the tank. All tanks meet the ASME rating for pressure vessels.

304 stainless steel tanks have good corrosion resistance.

316 stainless steel tanks have excellent corrosion resistance.

Safety regulations restrict sales to the listed jurisdictions/areas.

For technical drawings and 3-D models, click on a part number.

		Overall		Opening		Port
Capacity, gal.	Max. Pressure @ 100°F, psi	Dia.	Ht.	Lg.	Wd.	Pipe Size	Thread Type	Gender	No. of	Temp. Range, °F	Specifications Met	Cannot Be Sold To		Each
Tanks without Mounting Plate
304 Stainless Steel
10	129	12"	25"	4 7/8"	5 7/8"	1/4	NPT	Female	4	-20° to 100°	ASME BPVC.VIII.1	Canada	00000000	000000000
10	165	12"	25"	3 1/4"	3 7/8"	1/4	NPT	Female	4	-20° to 100°	ASME BPVC.VIII.1	Canada	00000000	00000000
316 Stainless Steel
10	115	12"	25"	4 7/8"	5 7/8"	1/4	NPT	Female	4	-20° to 100°	ASME BPVC.VIII.1	Canada	00000000	00000000
10	190	12"	25"	3 1/4"	3 7/8"	1/4	NPT	Female	4	-20° to 100°	ASME BPVC.VIII.1	Canada	0000000	00000000

Seals, Covers, and Caps

Vacuum closure caps are required to use tanks in vacuum applications.

	For 3 7/8" Opening Wd.		For 5 7/8" Opening Wd.
Tank Component		Each		Each
Replacement EPDM Pressure Seal	0000000	000000	0000000	000000
Fluoroelastomer Seal	000000	00000	0000000	00000
Replacement Cover	0000000	00000	0000000	000000
Vacuum Closure Cap	000000	000000	0000000	000000

Sanitary Pressurized Liquid Dispensing Tanks

Store and dispense liquids in food, pharmaceutical, and beverage plants—these tanks attach to a compressed air source for use in sanitary environments. A dip tube draws liquid from the bottom of these tanks for dispensing and spraying. They’re made of 316L stainless steel for excellent corrosion resistance, and have an electropolished finish that prevents product buildup and bacterial growth. Connect them to valves, hose, and caps with quick-clamp sanitary tube fittings, which are easier to sanitize than threaded fittings. Tanks comply with ASME BPVC.VIII safety standards for pressure vessels.

Safety regulations restrict sales to the listed jurisdictions/areas.

For technical drawings and 3-D models, click on a part number.

		Overall			Gauge Port
Capacity, gal.	Maximum Pressure @ 100° F, psi	Diameter	Height	Opening Diameter	Flange OD	Gender	Number of	Temperature Range, °F	Specifications Met	Cannot Be Sold To		Each
Tanks without Mounting Plate
Electropolished 316L Stainless Steel
10	125	12"	25"	3"	1 1/2"	Female	4	-20° to 100°	ASME BPVC.VIII.1	Canada	0000000	000000000

Rectangular Plastic Batch Cans with Faucet

A built-in faucet allows easy dispensing.

For technical drawings and 3-D models, click on a part number.

				Bottom Inside
Cap., gal.	Wd.	Dp.	Ht.	Wd.	Dp.	Thick.	Color	Clarity	Lid Type	Faucet Material	Seal Material	Max. Temp., °F	Space Saving Features	Features		Each
Polyethylene Plastic
10	19 3/4"	15"	10"	18"	13"	1/4"	White	Semi-Clear	Loose Fitting	Polyethylene Plastic	PTFE Plastic	175°	Stackable	Seamless	0000000	0000000

Rectangular Stainless Steel Batch Cans

316 stainless steel is more corrosion resistant than 304 stainless steel.

Batch cans with drain have a drain centered on the bottom of the can.

Batch Cans

Batch Can

Batch Cans
				Bottom Inside						Lids
Capacity, gal.	Wd.	Dp.	Ht.	Wd.	Dp.	Gauge	Appearance		Each	Lid Type		Each
316 Stainless Steel
10	14 1/4"	14 1/4"	17"	12 1/8"	12 1/8"	18	Dull	0000000	0000000	Loose Fitting	0000000	0000000

Batch Cans with Drain

Batch Can with Drain

Batch Cans
				Bottom Inside				Drain				Lids
Capacity, gal.	Wd.	Dp.	Ht.	Wd.	Dp.	Gauge	Appearance	Pipe Size	Gender		Each	Lid Type		Each
316 Stainless Steel
10	14 1/4"	14 1/4"	18"	12 1/8"	12 1/8"	18	Dull	1 NPT	Female	0000000	0000000	Loose Fitting	0000000	0000000

Round Plastic Batch Cans

Style A

Polyethylene Plastic
Capacity, gal.	Dia.	Ht.	Bottom ID	Thick.	Graduation Marks	Color	Clarity	Lid Type	Max. Temp., °F	Space Saving Features	Features		Each
10	14 3/4"	20 1/2"	13"	3/16"	1 gal.	White	Semi-Clear	Loose Fitting	140°	Stackable	Seamless	0000000	0000000

Style B

Batch Cans												Lids
Capacity, gal.	Dia.	Ht.	Bottom ID	Thick.	Color	Clarity	Max. Temp., °F	Space Saving Features	Features		Each	Lid Type		Each
Polyethylene Plastic
10	17"	16"	10 1/2"	3/16"	White	Semi-Clear	120°	Nestable	Seamless, Molded-In Handles	0000000	0000000	Loose Fitting	0000000	000000

High-Temperature Round Plastic Batch Cans

Polypropylene Plastic
Capacity, gal.	Dia.	Ht.	Bottom ID	Thick.	Graduation Marks	Color	Clarity	Lid Type	Max. Temp., °F	Space Saving Features	Features		Each
10	14 3/4"	20 1/2"	13"	3/16"	1 gal.	White	Semi-Clear	Loose Fitting	220°	Stackable	Seamless	0000000	0000000

Round Stainless Steel Batch Cans with Faucet

A built-in faucet allows easy dispensing.

304 Stainless Steel
Cap., gal.	Dia.	Ht.	Bottom ID	Gauge	Appearance	Faucet Material	Seal Material		Each
10	14"	17"	14"	22	Polished	316 Stainless Steel	PTFE Plastic	0000000	0000000

Food Industry Round Metal Batch Cans

These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.

For technical drawings and 3-D models, click on a part number.

Style B

Batch Cans									Lids
Capacity	Dia.	Ht.	Bottom ID	Gauge	Appearance	Specifications Met		Each	Lid Type		Each
Aluminum
10 gal.	14"	15"	12 1/4"	8	Dull	NSF/ANSI 2	0000000	0000000	Loose Fitting	0000000	000000

Narrow-Mouth Round Stainless Steel Batch Cans

Also known as milk cans, these have a narrow mouth for controlled pouring. They have a reinforced bottom to minimize wear and tear when sliding cans along the floor. The lid has two 7/16" dia. holes for attaching a tag.

304 Stainless Steel
Capacity, gal.	Dia.	Ht.	Mouth OD	Gauge	Appearance	Lid Type		Each
10	13 1/4"	23 3/4"	7 1/2"	18	Dull	Tight Fitting	000000	0000000

Stainless Steel Drums

These drums are corrosion resistant and are UN-compliant for shipping.

Open Head with Nut-and-Bolt Closing Ring and Lid with No Openings

304 Stainless Steel
Cap., gal.	Dia.	Ht.	Bottom ID	Gauge	Weight Cap., lbs.	Seal Material	Closing Ring Material	Space Saving Features	Shipping Standard		Each
10	15"	19"	14"	20	250	EPDM Rubber	Steel	Stackable	UN1A2/X120/S, UN1A2/Y1.8/150	0000000	0000000

Closed Head with Two Openings

					Openings
Cap., gal.	Dia.	Ht.	Gauge	Weight Cap.	Pipe Size	Gender	Space Saving Features	Shipping Standard		Each
304 Stainless Steel
10	15"	19"	20	Not Rated	2 BSPP, 3/4 BSPP	Female	Stackable	UN1A1/X1.4/250	0000000	0000000

Replacement Lids

			304 Stainless Steel
For Drum Capacity, gal.	Gauge	Seal Material		Each
Lid with No Openings
16, 10, 8	20	EPDM Rubber	0000000	0000000

Replacement Seals

For Drum Capacity, gal.		Each
16, 10	00000000	00000

Replacement Closing Rings

Nut-and-Bolt Closing Ring
For Drum Capacity, gal.		Each
16, 10	00000000	000000

Food Industry Stainless Steel Drums

In addition to being corrosion resistant, these drums have smooth, welded seams to prevent food and chemicals from collecting in crevices.

Closed-head drums have a lid that’s permanently sealed, so the only way to access the contents inside is through the two lid openings. They’re often used to hold wine and other liquids because they’re less likely to leak or spill than open-head drums. All are UN compliant for shipping.

For technical drawings and 3-D models, click on a part number.

Closed Head with Lid and Two Openings

Drums
							Pipe Connection						Replacement Drum Plugs for Pipe Size 3/4		Replacement Drum Plugs for Pipe Size 2
Capacity, gal.	Dia.	Ht.	Bottom ID	Gauge	Weight Capacity	Seal Material	Gender	Thread Type	Pipe Size	Shipping Standard		Each		Each		Each
304 Stainless Steel
10	14 1/2"	19 1/2"	14"	18	Not Rated	PTFE Plastic	Female	NPSM	3/4, 2	UN1A1/X1.8/550	00000000	0000000	00000000	000000	00000000	000000

Corrosion-Resistant Steel Drums

The inside of these drums is epoxy coated to resist rust. Drums are UN-compliant for shipping.

Open Head with Nut-and-Bolt Closing Ring and Lid with No Openings

Painted Steel
Cap., gal.	Dia.	Ht.	Bottom ID	Gauge	Weight Cap., lbs.	Color	Seal Material	Closing Ring Material	Space Saving Features	Shipping Standard		Each
10	15"	19"	14"	20	250	Black	EPDM Rubber	Steel	Stackable	UN1A2/X120/S, UN1A2/Y1.8/150	00000000	0000000

Open Head with Leverlock Closing Ring and Lid with No Openings

Open Head with
Leverlock Closing Ring
and Lid with No Openings

Painted Steel
Cap., gal.	Dia.	Ht.	Bottom ID	Gauge	Weight Cap., lbs.	Color	Seal Material	Closing Ring Material	Space Saving Features	Shipping Standard		Each
10	15"	19"	14"	20	250	Black	EPDM Rubber	Steel	Stackable	UN1A2/X120/S	00000000	0000000

Replacement Lids

Lid with No Openings
For Drum Capacity, gal.	Gauge		Each
16, 10	20	00000000	000000

Steel Drums

All drums are UN-compliant for shipping.

Open Head with Nut-and-Bolt Closing Ring and Lid with No Openings

Painted Steel
Cap., gal.	Dia.	Ht.	Bottom ID	Gauge	Weight Cap., lbs.	Color	Seal Material	Closing Ring Material	Space Saving Features	Shipping Standard		Each
10	15"	19"	14"	20	250	Black	EPDM Rubber	Steel	Stackable	UN1A2/X120/S, UN1A2/Y1.8/150	0000000	0000000

Open Head with Leverlock Closing Ring and Lid with No Openings

Painted Steel
Cap., gal.	Dia.	Ht.	Bottom ID	Gauge	Weight Cap., lbs.	Color	Seal Material	Closing Ring Material	Space Saving Features	Shipping Standard		Each
10	15"	19"	14"	20	250	Black	EPDM Rubber	Steel	Stackable	UN1A2/X120/S	0000000	0000000

Open Head with Leverlock Closing Ring and Lid with Two Openings

									Openings
Cap., gal.	Dia.	Ht.	Bottom ID	Gauge	Weight Cap., lbs.	Color	Seal Material	Closing Ring Material	Pipe Size	Gender	Space Saving Features	Shipping Standard		Each
Painted Steel
10	15"	19"	14"	20	250	Black	EPDM Rubber	Steel	2 NPSM, 3/4 NPSM	Female	Stackable	UN1A2/X120/S	00000000	0000000

Closed Head with Two Openings

						Openings
Cap., gal.	Dia.	Ht.	Gauge	Weight Cap.	Color	Pipe Size	Gender	Space Saving Features	Shipping Standard		Each
Painted Steel
10	15"	19 1/4"	20	Not Rated	Black	2 NPSM, 3/4 NPSM	Female	Stackable	UN1A1/X1.4/250	0000000	0000000

Replacement Lids

Lid with No Openings
For Drum Capacity, gal.	Gauge		Each
16, 10	18	00000000	000000
Lid with Two Openings
16, 10	20	00000000	00000

Replacement Seals

For Drum Capacity, gal.		Each
16, 10	00000000	00000

Replacement Closing Rings

Nut-and-Bolt Closing Ring
For Drum Capacity, gal.		Each
16, 10	00000000	000000
Leverlock Closing Ring
16, 10	0000000	00000

Salvage/Overpack Drums

Use these drums for secondary containment or for temporarily storing and transporting leaking containers. All drums are UN-compliant for shipping.

Painted Steel

Steel with Nut-and-Bolt Closing Ring

Steel with Leverlock Closing Ring

With Nut-and-Bolt Closing Ring
For Drum Cap., gal.	Cap., gal.	Weight Cap., lbs.	Dia.	Ht.	Bottom ID	Inside Ht.	Gauge	Color	Lid Color	Seal Material	Closing Ring Material	Space Saving Features	Shipping Standard		Each
5	10	250	14 1/4"	19 1/4"	14"	17"	20	Yellow	Red	EPDM Rubber	Steel	Stackable	UN1A2/X120/S, UN1A2/Y1.8/150	0000000	0000000
With Leverlock Closing Ring
5	10	250	14 1/4"	19"	14"	17"	20	Yellow	Red	EPDM Rubber	Steel	Stackable	UN1A2/X120/S	0000000	000000

Rubber and Plastic Tubs

These tubs are crack and dent resistant.

For technical drawings and 3-D models, click on a part number.

Round

Rubber/Polyethylene Plastic Blend
Style	Capacity, gal.	Dia.	Ht.	Bottom ID	Thick.	Max. Temp., °F	Space Saving Features	Specifications Met	Choose a Color		Each
B	10	18"	14"	14"	1/8"	160°	Nestable	FDA Compliant 21 CFR 177.1520	Black, Blue, Red	000000	000000

Vacuum Containers

Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.

Aluminum containers are lightweight, corrosion resistant, and good for general use.

Containers with a side-mount gauge allow you to see the material inside of them when looking from the top.

Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.

Replacement lids do not include hardware or seal.

Replacement manifold assemblies include a manifold, vacuum gauge, washer, O-ring, and hex nut.

Containers

Aluminum with Top-Mount Gauge

Aluminum with Side-Mount Gauge

Containers
				Gauge			Hose											Replacement Lids
Cap.	Dia.	Ht.	Bottom ID	Vacuum Range, in. of Hg	Accuracy	Grad. Marks, in. of Hg	Lg.	Thread Size	Gender	For Connection Style	For Flared Angle	For Tube OD	Max. Temp., °F	Removes Particle Size Down To	Includes		Each		Each
Aluminum with Top-Mount Gauge
Acrylic Plastic Lid with Silicone Rubber Seal
10 gal.	15 1/4"	17"	14"	30 to 0	±5%	0.5	5 ft.	7/16"-20 UNF	Female	Flared	37°, 45°	1/4"	150°	50 microns	50 Micron Air Filter, Lid	0000000	0000000	0000000	0000000
Aluminum with Side-Mount Gauge
Acrylic Plastic Lid with Silicone Rubber Seal
10 gal.	15 1/4"	17"	14"	30 to 0	±5%	0.5	5 ft.	7/16"-20 UNF	Female	Flared	37°, 45°	1/4"	150°	50 microns	50 Micron Air Filter, Lid	0000000	000000	0000000	000000

Replacement Manifold Assemblies

Gauge Mounting Location		Each
Side	0000000	000000

Replacement Filters

Removes Particle Size Down To		Each
50 microns	0000000	00000

Flood Coolant Dispensers with Reservoir

These dispensers have a reservoir for recirculating coolant. They provide a constant flow of coolant, so they dissipate heat more efficiently than mist and droplet dispensers, making them suitable for cooling long machine cycles. Coolant strainers prevent debris from getting into the recirculated coolant.

Maximum flow rate and shut-off height are for water-soluble oil. Shut-off height is the maximum height to which the water-soluble oil can be pumped.

					Nozzle				Reservoir
	Cap., gal.	Max. Flow Rate	Max. Pressure, psi	Coolant Outlet Hose Lg.	Lg.	Type	Nozzle Material	O'all Ht.	Wd.	Dp.	Reservoir Material	Shut-Off Ht., ft.	For Max. SSU Viscosity Grade	Voltage	Features		Each
For Use With Coolant, Water
C	10	600 gph @ 1 ft. of head	5.6	4 ft.	15"	Flexible	Steel	16 1/2"	24"	9 3/4"	Steel	14	500	120V AC	Adjustable Flow, Coolant Strainer, On/Off Valve	0000000	0000000
D	10	500 gph @ 1 ft. of head	7.5	4 ft.	12"	Flexible	Acetal Plastic	12"	25"	10"	Steel	17.3	300	120V AC	Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve	00000000	000000

Hydraulic Tanks

Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.

Dual chamber tanks have a divider that allows particles to settle on one side before fluid is returned to your line.

Breather vents prevent excess pressure in tanks and allow a free flow of air.

For technical drawings and 3-D models, click on a part number.

Replacement Cover

Replacement Gasket

		O'all			Drain Connection— NPT			Inlet/Outlet Connection— NPT			Mounting
Style	Cap., gal.	Lg.	Wd.	Ht.	Pipe Size	Dash Size	No. of Ports	Pipe Size	Dash Size	No. of Ports	Fasteners Included	No. of Holes	Hole Dia.	Max. Temp., °F		Each
Steel Tanks
Single Chamber
B	10	19"	14 7/8"	15 1/4"	3/4	12	1	__	__	__	No	4	7/16"	212°	00000000	0000000
Dual Chamber
A	10	20"	12"	17 1/2"	1/2	08	2	1	16	2	No	4	17/32"	250°	0000000	000000

Replacement Buna-N Rubber Gasket for 62945K14, 62945K15, and 62945K34	00000000	Each	00000
Replacement Steel Cover for 62945K14, 62945K15, and 62945K34	00000000	Each	00000
Replacement Neoprene Rubber Gasket for 62945K14 and 62945K15	00000000	Each	00000

Pipe Suction Flanges

				Mounting Hole
For Pipe Size	For Cutout Dia.	Material	Mounting Fasteners Included	Ctr.-to-Ctr.	Lg.	Wd.	Includes		Each
1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	000000
3/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000
1 1/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000
1 1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000
2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000

Breather Vents

					Cap
Pipe Size	Thread Type	Gender	Material	Removes Particle Size Down To, microns	Dia.	Ht.	O'all Ht.	Hex Wd.		Each
1/2	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1"	00000000	00000
3/4	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1 1/8"	00000000	0000

Flange-Mount Breather Vents

	Material						Strainer			Mounting Hole
For Cutout Dia.	Cap	Strainer	Gasket	Removes Particle Size Down To, microns	Cap Dia.	Flange Dia.	Dia.	Ht.	Mounting Fasteners Included	Lg.	Wd.	Bolt Circle Dia.		Each
2 1/8"	Zinc-Plated Steel	Plastic	Rubber	40	3"	3 1/4"	1 7/8"	3 13/16"	Yes	1/4"	3/16"	2 7/8"	00000000	000000

Level Indicators for Style A Tanks

Through-Wall Mount

Thread
Size	Type	Gender	Connection Ctr.-to-Ctr.	Overall Ht.	Window Ht.	Body Wd.	For Max. Tank Wall Thick.	Max. Pressure	Temperature Range	Material	Fitting Material	Window Material	Includes		Each
1/2"-20	UNF	Male	9"	10 5/8"	7 1/2"	7/8"	3/4"	290 psi @ 70° F	-40° F to 250° F	Aluminum	Aluminum	Glass	Mounting Nuts	0000000	000000

Level and Temperature Indicators for Styles B and C Tanks

Nylon Plastic With Steel Guard

For Hole
Dia.	No. of	Connection Ctr.-to-Ctr.	Overall Ht.	Window Ht.	Body Wd.	For Max. Tank Wall Thick.	Max. Pressure	Temp. Range	Thermometer Temp. Range	Material	Guard Material	Window Material		Each
1/2"	2	5"	6 3/8"	3 7/8"	13/16"	1/2"	50 psi @ 70° F	-40° F to 210° F	0° F to 220° F	Nylon Plastic	Steel	Nylon Plastic	0000000	000000