Tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.

They cannot be sold to New Jersey or Canada due to safety and pressure vessel regulations.

For technical drawings and 3-D models, click on a part number.

Attach a compressed air source to pressurize liquids for dispensing and spraying. Tanks have a dip tube that draws liquid from the bottom of the tank. All tanks meet the ASME rating for pressure vessels.

304 stainless steel tanks have good corrosion resistance.

316 stainless steel tanks have excellent corrosion resistance.

Safety regulations restrict sales to the listed jurisdictions/areas.

For technical drawings and 3-D models, click on a part number.

These batch cans come with loose fitting dust covers to protect contents from dust and debris.

For technical drawings and 3-D models, click on a part number.

These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.

Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.

Powder-coated steel cans are for petroleum-based liquids. Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.

Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Style C have a rotating spout that flips down for pouring and up for storage.

Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene.

The spout on Styles A and C automatically closes to prevent spills. Push the button to pour.

Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.

Aluminum containers are lightweight, corrosion resistant, and good for general use.

Containers with a side-mount gauge allow you to see the material inside of them when looking from the top.

Glass lids resist corrosion. They’re primarily used to eliminate air bubbles in woodworking projects that use harsh chemicals, which would deteriorate plastic lids. Glass lids are less durable than acrylic lids.

Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.

Replacement lids do not include hardware or seal.

Replacement manifold assemblies include a manifold, vacuum gauge, washer, O-ring, and hex nut.

Store leftover hazardous liquids until they can be properly discarded. The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.

Plastic cans are for aggressive chemicals and corrosives.

These dispensers have a reservoir and controls for coolant flow. Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.

Use the optional on/off air switch with styles D and E. Install in the air supply line to save energy.

Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.

Breather vents prevent excess pressure in tanks and allow a free flow of air.

For technical drawings and 3-D models, click on a part number.

Easily insert and remove parts from these cans. Good for small cleaning jobs, they save space and solution. A fusible link closes the cover in the event of a fire.

Melt coatings, adhesive, wax, tar, and alloys with low melting points. These pots have an internal heating element that ensures fast and even heat transfer. Stir contents periodically to prevent damage to the inside of the pot.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Style A, B, and C sprayers have a trigger that locks for continuous spray.

Style A sprayers have a filter in the tank to prevent clogs.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Sprayers with a filter prevent clogs.

Sprayers with an extended handle let you pump, pick up, and put down sprayers without bending over, saving you from back strain.

Sprayers with a spray shield focus your spray so that chemicals go only where intended.