Attach a compressed air source to pressurize liquids for dispensing and spraying. Tanks have a dip tube that draws liquid from the bottom of the tank. All tanks meet the ASME rating for pressure vessels.

304 stainless steel tanks have good corrosion resistance.

316 stainless steel tanks have excellent corrosion resistance.

Safety regulations restrict sales to the listed jurisdictions/areas.

For technical drawings and 3-D models, click on a part number.

These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.

These carboys are fluorinated to prevent contents from being absorbed.

Store a large quantity of liquid in these bottles and use the built-in faucet to dispense.

Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.

Aluminum containers are lightweight, corrosion resistant, and good for general use.

18-8 stainless steel containers have excellent corrosion resistance and are commonly used in laboratories.

Containers with a side-mount gauge allow you to see the material inside of them when looking from the top.

Glass lids resist corrosion. They’re primarily used to eliminate air bubbles in woodworking projects that use harsh chemicals, which would deteriorate plastic lids. Glass lids are less durable than acrylic lids.

Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.

Replacement lids do not include hardware or seal.

Replacement manifold assemblies include a manifold, vacuum gauge, washer, O-ring, and hex nut.

These dispensers have a reservoir and controls for coolant flow. Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.

Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.

Breather vents prevent excess pressure in tanks and allow a free flow of air.

For technical drawings and 3-D models, click on a part number.

Melt coatings, adhesive, wax, tar, and alloys with low melting points. These pots have an internal heating element that ensures fast and even heat transfer. Stir contents periodically to prevent damage to the inside of the pot.

240V AC melting pot is hardwire and requires a NEMA plug (sold separately).

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Style A, B, and C sprayers have a trigger that locks for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Sprayers with a dripless wand have a safety lock that prevents accidental spraying. Made of brass, these sprayers resist chemicals, so they can be used with harsh liquids such as acetone.

Replacement trigger and wand kits do not include nozzles.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.