A spring delivers a constant, low-pressure flow of grease to your lubrication point, so it never runs dry. They’re best for applications with consistent temperatures, so the viscosity of the grease won’t change how quickly it flows. However, they shouldn’t be used in precision applications because the tension of the spring may change, causing the dispensing rate to change. Mount them close to the lubrication point. They have a standard grease fitting, so you can choose what grease to use, unlike prefilled dispensers. The grease fitting helps close the system to keep out dust and contaminants in dirty environments such as mills. Use grease fitting adapters to match your lubrication point.

Dispensers with a clear plastic bowl make it easy to see how much grease is left and whether the dispenser is working properly. These dispensers come with three different adjustment springs to fit your dispensing needs.

Dispensers with a steel bowl are more durable than dispensers with a plastic bowl, so they’re the better choice if there's vibration or impact.

Plastic housings are an economical choice when there's minimal vibration. Aluminum housings withstand vibration, shock, and impact. Nickel-chrome-plated aluminum housings resist corrosion better than plastic and aluminum dispensers.

Remote-mount springs (sold separately) provide extra pressure when using thick grease at a distance.

Remote-mount kits include a mounting bracket, tubing, and fittings.

By releasing a precise amount of grease at regular intervals, these motor-driven dispensers make sure your machine always has the right amount of grease. They’ll dispense correctly even if temperature changes affect the grease consistency. They’re not impacted by back pressure either. And because they’re driven by a motor instead of gas or a spring, these dispensers don’t need to be mounted close to your lubrication point. To prevent over-lubrication when your machine is down, you can cut off the flow without uninstalling the dispenser.

Use the digital display to input your flow settings. It also shows you the grease levels and the time until the dispenser empties, helping you plan for maintenance. Lights indicate the status of your dispenser, so you can see at a glance if it's operating. If it's not operating correctly, you'll see error and feedback messages on the display.

Rated IP65, these dispensers seal out dust and water from washdowns.

Use grease fitting adapters to match your lubrication point.

Battery and grease-filled cartridge kits are required. They save you from the mess and contamination risk that comes with filling a grease cartridge yourself. These cartridge kits also reduce the chance you’ll fill a lubrication point with the wrong grease.

Remote-mounts kits include a fitting, a bracket, and tubing, so you'll have everything you need to remotely mount your dispenser.

For technical drawings and 3-D models, click on a part number.

Send precise amounts of grease to multiple lubrication points at regular intervals, so each point will always have the grease it needs. These dispensers have a pump for each outlet, so they can send different amounts of grease to each lubrication point. It also means the lubrication points can be different distances from the dispenser. Because they’re motor driven, they’ll dispense correctly even if temperature changes affect the grease consistency. They’re also unaffected by back pressure. Unlike spring- and gas-driven dispensers, they don’t need to be mounted close to their lubrication points. To prevent over-lubrication when your machine is down, there’s a button to cut off the flow without uninstalling the dispenser. You can also integrate them into a system that’s controlled by a PLC and program them to only grease when your machine is running and not when it's down. This is useful for systems with intermittent downtime.

Use the digital display to input your flow settings. It also shows you the grease levels and the time until the dispenser empties, helping you plan for maintenance. Lights indicate the status of your dispenser, so you can see at a glance if it's operating. If it's not operating correctly, you'll see error and feedback messages on the display.

To match your lubrication point, use grease fitting adapters.

IP54 rated dispensers protect against dust and splashing water. IP68 rated dispensers are dust tight and seal out water from temporary submersion.

Empty cartridges can be filled with the grease of your choice. Attach a cartridge filling adapter (sold separately) to make the filling process quick and mess free. Grease-filled cartridges save you from the mess and contamination risk that comes with filling a grease cartridge yourself. They also reduce the chance you’ll fill a lubrication point with the wrong grease.

Mobil Polyrex EM grease handles moderate loads at high speeds, making it a good choice for electric motor bearings in fans, pumps, and dryers. White mineral grease is NSF registered H1, so it’s safe for incidental contact with food. Red mineral grease is great for a wide range of bearings because it resists wear. Semisynthetic grease works with most machinery.

Grease with a polyurea thickener has excellent heat resistance and good moisture and oxidation resistance. Grease with a lithium thickener offers good heat and moisture resistance. Grease with an aluminum thickener has good moisture resistance and excellent oxidation resistance.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers. Use it with your pail of grease. Container not included.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets.

Styles A and C do not include a container. Use them with your pail of grease.