Tapered Bearings | McMaster-Carr

	System of Measurement System of Measurement

Inch

Metric

	For Shaft Diameter For Shaft Diameter

	For Load Direction For Load Direction

	Combined Radial and Thrust
	Thrust
	Radial

	OD OD

	ID ID

	Bearing Type Bearing Type


Roller	Ball

	Bearing Trade Number Bearing Trade Number

	Width Width

	For Housing ID For Housing ID

	Dynamic Thrust Load Capacity Dynamic Thrust Load Capacity

Less than 1,000 lbs.

1,000 to 1,999 lbs.

2,000 to 9,999 lbs.

10,000 to 19,999 lbs.

20,000 lbs. or greater

	Dynamic Radial Load Capacity Dynamic Radial Load Capacity

10,000 lbs. or greater

	Maximum Speed Maximum Speed

	Static Radial Load Capacity Static Radial Load Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

20,000 to 29,999 lbs.

30,000 to 99,999 lbs.

100,000 lbs. or greater

	Static Thrust Load Capacity Static Thrust Load Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

20,000 to 29,999 lbs.

30,000 to 99,999 lbs.

100,000 lbs. or greater

Not Rated

	For Shaft Type For Shaft Type


Round	Tapered

	Cage Material Cage Material

Steel

Plastic

	Inner Ring Width Inner Ring Width

	Shaft Mount Type Shaft Mount Type

Press Fit

Set Screw

	Seal Type Seal Type

Open

Sealed

	Cage Width Cage Width

	Minimum Temperature Minimum Temperature

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

View catalog pages (5)

Forward

How can we improve?

126 Products

About Ball and Roller Bearings

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

Zinc-coated steel bearings provide better corrosion resistance than steel bearings.

For technical drawings and 3-D models, click on a part number.

				Radial Load Cap., lbs.		Thrust Load Cap., lbs.
For Shaft Dia.	For Housing ID	Wd.	Bearing Trade Number	Dynamic	Static	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F		Each
Steel Ring
Open
3/8"	1 17/64"	5/16"	A2037/A2126	630	2,050	430	2,450	7,200	Required	-60° to 200°	00000000	0000000
1/2"	1 3/8"	0.344"	A4050/A4138	700	2,550	550	3,400	6,300	Required	-60° to 200°	00000000	00000
5/8"	1 11/16"	3/8"	11590/11520	1,000	3,900	1,200	8,000	5,000	Required	-60° to 200°	0000000	00000
11/16"	1 37/64"	0.42"	LM11749/LM11710	1,300	5,250	650	4,350	5,500	Required	-60° to 200°	0000000	00000
3/4"	1 25/32"	0.475"	LM11949/LM11910	1,750	7,200	910	6,300	4,900	Required	-60° to 200°	0000000	00000
3/4"	1 15/16"	9/16"	09067/09195	2,300	9,100	1,050	7,050	4,900	Required	-60° to 200°	0000000	00000
55/64"	1 25/32"	0.475"	LM12749/LM12710	1,750	7,900	920	7,050	4,500	Required	-60° to 200°	0000000	00000
7/8"	2 3/64"	1/2"	07087/07204	1,700	6,650	1,150	7,750	4,100	Required	-60° to 200°	00000000	00000
63/64"	1 31/32"	3/8"	07097/07196	1,550	6,650	1,050	7,750	4,100	Required	-60° to 200°	0000000	00000
1"	1 31/32"	3/8"	07100/07196	1,550	6,650	1,050	7,750	4,100	Required	-60° to 200°	0000000	00000
1"	1 63/64"	0.42"	L44643/L44610	1,600	7,400	1,000	8,050	3,900	Required	-60° to 200°	0000000	00000
1"	2 7/16"	9/16"	15100/15245	2,700	12,100	1,600	12,400	3,300	Required	-60° to 200°	0000000	00000
1 1/16"	1 63/64"	0.42"	L44649/L44610	1,600	7,400	1,000	8,050	3,900	Required	-60° to 200°	0000000	00000
1 1/8"	2 29/64"	9/16"	15113/15245	2,700	12,100	1,600	12,400	3,300	Required	-60° to 200°	0000000	00000
1 3/16"	2 7/16"	5/8"	15118/15244	2,700	12,100	1,600	12,400	3,300	Required	-60° to 200°	0000000	00000
1 1/4"	2 21/64"	0.465"	LM67048/LM67010	2,100	10,000	1,500	12,000	3,400	Required	-60° to 200°	0000000	00000
1 1/4"	2 23/32"	5/8"	14125A/14276	2,950	13,900	1,900	15,400	3,000	Required	-60° to 200°	0000000	00000
1 5/16"	2 11/16"	11/16"	M88048/M88010	3,450	17,400	3,250	27,700	3,000	Required	-60° to 200°	0000000	00000
1 3/8"	2 23/32"	5/8"	14137A/14274	3,150	13,900	2,050	15,400	3,000	Required	-60° to 200°	00000000	00000
1 7/16"	3"	15/16"	31597/31521	5,500	24,100	3,800	28,200	2,800	Required	-60° to 200°	00000000	00000
1 1/2"	3"	3/4"	2788/2720	4,650	23,000	2,400	20,300	2,800	Required	-60° to 200°	0000000	00000
1 3/4"	3 17/64"	3/4"	25580/25520	4,850	24,900	2,800	24,200	2,400	Required	-60° to 200°	0000000	00000
2"	3 1/4"	0.65"	LM104949/LM104911	4,350	23,400	2,250	20,800	2,300	Required	-60° to 200°	0000000	00000
2"	3 1/2"	0.65"	368A/362A	4,600	21,500	2,500	20,100	2,300	Required	-60° to 200°	0000000	00000
2"	4 1/8"	15/16"	45284/45220	8,250	42,600	4,700	41,300	1,900	Required	-60° to 200°	0000000	000000
2 1/4"	3 13/16"	5/8"	387A/382A	4,900	24,100	2,950	24,900	2,000	Required	-60° to 200°	0000000	00000
2 1/2"	4 1/4"	3/4"	29585/29520	7,600	36,300	5,950	48,400	1,700	Required	-60° to 200°	00000000	000000
2 3/4"	4 7/16"	3/4"	29675/29620	5,950	37,200	4,950	52,800	1,600	Required	-60° to 200°	0000000	000000
3"	5"	7/8"	42687/42620	8,650	49,800	6,200	60,800	1,500	Required	-60° to 200°	0000000	000000
3 1/4"	5 1/4"	1.031"	47686/47620	9,750	58,750	6,750	69,250	1,400	Required	-60° to 200°	0000000	000000
4"	6 3/16"	1.031"	52400/52618	13,000	77,000	10,600	107,000	1,100	Required	-60° to 200°	00000000	000000
15mm	42mm	11mm	30302	1,400	4,950	680	4,100	5,700	Required	-60° to 200°	0000000	00000
15mm	42mm	11mm	30302	5,350	4,850	2,500	Not Rated	9,000	Required	-50° to 300°	0000000	00000
17mm	40mm	11mm	30203	1,150	4,450	680	4,450	5,400	Required	-60° to 200°	0000000	00000
17mm	40mm	11mm	30203	4,750	4,750	2,850	Not Rated	9,000	Required	-50° to 300°	0000000	00000
20mm	47mm	12mm	30204	1,750	7,400	1,050	7,450	4,600	Required	-60° to 200°	0000000	00000
20mm	47mm	12mm	30204	6,300	6,850	3,750	Not Rated	8,000	Required	-50° to 300°	0000000	00000
20mm	52mm	13mm	30304	2,050	7,750	1,050	6,750	4,500	Required	-60° to 200°	0000000	00000
20mm	52mm	13mm	30304	10,000	10,400	5,100	Not Rated	7,500	Required	-50° to 300°	0000000	00000
25mm	52mm	13mm	30205	1,800	8,600	1,150	9,400	4,100	Required	-60° to 200°	0000000	00000
25mm	52mm	13mm	30205	6,600	5,050	4,050	Not Rated	7,500	Required	-50° to 300°	0000000	00000
30mm	55mm	13mm	32006	2,100	10,200	1,550	12,800	3,500	Required	-60° to 200°	0000000	00000
30mm	55mm	13mm	32006	8,500	10,950	6,250	Not Rated	6,700	Required	-50° to 300°	0000000	00000
30mm	62mm	14mm	30206	2,350	9,850	1,500	12,700	3,400	Required	-60° to 200°	0000000	00000
30mm	62mm	14mm	30206	10,200	11,350	6,450	Not Rated	6,300	Required	-50° to 300°	0000000	00000
35mm	62mm	14mm	32007	2,550	12,900	2,000	17,100	3,000	Required	-60° to 200°	0000000	00000
35mm	62mm	14mm	32007	9,400	12,550	7,400	Not Rated	6,000	Required	-50° to 300°	0000000	00000
35mm	72mm	15mm	30207	3,250	14,300	2,100	15,600	2,900	Required	-60° to 200°	0000000	00000
35mm	72mm	15mm	30207	9,400	12,550	5,950	Not Rated	5,300	Required	-50° to 300°	0000000	00000
40mm	68mm	14.5mm	32008	3,000	16,100	1,900	17,700	2,700	Required	-60° to 200°	0000000	00000
40mm	68mm	14.5mm	32008	10,550	15,100	6,650	Not Rated	5,300	Required	-50° to 300°	0000000	00000
50mm	80mm	19mm	33010	4,650	25,200	2,500	23,300	2,200	Required	-60° to 200°	0000000	000000
60mm	95mm	17.5mm	32012	5,600	29,500	4,100	37,000	1,800	Required	-60° to 200°	0000000	00000
70mm	110mm	19mm	32014	6,500	36,600	4,850	46,500	1,500	Required	-60° to 200°	0000000	000000
80mm	125mm	22mm	32016	9,650	53,500	7,000	55,500	1,400	Required	-60° to 200°	0000000	000000
Zinc-Coated Steel Ring
Open
3/4"	1 25/32"	0.475"	LM11949/LM11910	1,750	7,200	910	6,300	4,900	Required	-60° to 200°	0000000	00000
1"	1 63/64"	0.42"	L44643/L44610	1,600	7,400	1,000	8,050	3,900	Required	-60° to 200°	0000000	00000
1 1/16"	1 63/64"	0.42"	L44649/L44610	1,600	7,400	1,000	8,050	3,900	Required	-60° to 200°	0000000	00000
1 1/4"	2 21/64"	0.465"	LM67048/LM67010	2,100	10,000	1,500	12,000	3,400	Required	-60° to 200°	0000000	00000

Tapered-Roller Thrust Bearings

Open

Sealed

Thick, tapered rollers stand up to extremely high thrust loads.

Open bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings have better dust resistance than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

				Thrust Load Cap., lbs.
For Shaft Dia.	OD	Thick.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F		Each
Open
1 1/4"	2.198"	0.625"	Steel	12,000	34,100	10	Required	0° to 150°	00000000	000000
1 1/4"	2.635"	0.7658"	Steel	18,300	55,500	10	Required	0° to 150°	00000000	00000
1 3/8"	2.323"	0.656"	Steel	14,500	42,000	10	Required	0° to 150°	00000000	00000
1 1/2"	2.604"	0.765"	Steel	20,300	58,000	10	Required	0° to 150°	00000000	00000
1 5/8"	2.869"	0.8438"	Steel	20,500	62,500	10	Required	0° to 150°	00000000	00000
1 13/16"	3.276"	0.9375"	Steel	28,400	91,250	10	Required	0° to 150°	00000000	00000
2"	2.948"	0.625"	Steel	13,300	28,700	10	Required	0° to 150°	00000000	00000
2 1/16"	3.682"	1.062"	Steel	37,500	115,000	10	Required	0° to 150°	00000000	00000
Sealed
1 1/4"	2.29"	0.677"	Steel	12,000	34,100	10	Required	0° to 150°	00000000	00000
1 3/8"	2.398"	0.656"	Steel	14,500	42,000	10	Required	0° to 150°	00000000	00000
1 1/2"	2.705"	0.815"	Steel	20,300	58,000	10	Required	0° to 150°	00000000	00000
1 5/8"	2.98"	0.8438"	Steel	20,500	62,500	10	Required	0° to 150°	00000000	00000
1 13/16"	3.455"	0.99"	Steel	28,400	91,250	10	Required	0° to 150°	00000000	00000
2 1/16"	3.823"	1.121"	Steel	37,500	115,000	10	Required	0° to 150°	00000000	000000

Tapered Bore Self-Aligning Ball Bearings

Tapered Shaft

For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.

For technical drawings and 3-D models, click on a part number.

					Radial Load Capacity
Bearing Trade Number	For Shaft Diameter, mm	For Housing ID, mm	Width, mm	Ring Material	Dynamic	Static, lbs.	Maximum Speed, rpm	Lubrication	Misalignment Capability	Maximum Temperature, °F	Rate of Taper	ABEC Rating		Each
Open
1204K	20	47	14	Steel	2,200	580	14,000	Required	4°	240°	1:12	ABEC-1	0000000	000000
1205K	25	52	15	Steel	2,700	740	12,000	Required	4°	240°	1:12	ABEC-1	0000000	00000
1206K	30	62	16	Steel	3,550	1,000	10,000	Required	4°	240°	1:12	ABEC-1	0000000	00000
1207K	35	72	17	Steel	3,550	1,100	8,500	Required	4°	240°	1:12	ABEC-1	0000000	00000
1208K	40	80	18	Steel	4,300	1,450	7,500	Required	4°	240°	1:12	ABEC-1	0000000	00000
1304K	20	52	15	Steel	2,800	750	12,000	Required	4°	240°	1:12	ABEC-1	0000000	00000
2205K	25	52	18	Steel	2,750	770	12,000	Required	4°	240°	1:12	ABEC-1	0000000	00000
2208K	40	80	23	Steel	5,000	1,650	7,500	Required	4°	240°	1:12	ABEC-1	0000000	00000
2209K	45	85	23	Steel	5,200	1,800	7,100	Required	4°	240°	1:12	ABEC-1	0000000	00000
2211K	55	100	25	Steel	6,000	2,200	6,000	Required	4°	240°	1:12	ABEC-1	0000000	000000
2306K	30	72	27	Steel	7,150	1,950	8,000	Required	4°	240°	1:12	ABEC-1	0000000	00000
2309K	45	100	36	Steel	12,350	3,750	5,600	Required	4°	240°	1:12	ABEC-1	0000000	000000

Mounted Roller Bearings with Four-Bolt Flange

The tapered rollers in these bearings support large shafts at high static loads. Seals block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

	Overall				Mounting		Radial Load Cap., lbs.
For Shaft Dia.	Ht.	Lg.	Wd.	Flange Thick.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic	Static	Dynamic Thrust Load Cap., lbs.	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Lubrication		Each
Sealed Tapered-Roller Bearings
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw
1 1/4"	3 3/4"	3 3/4"	2 13/16"	1"	3/8"	2 7/8"	3,800	15,700	2,000	4,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	0000000
1 1/2"	5 3/8"	5 3/8"	3 1/2"	1 3/16"	1/2"	4 1/8"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 3/4"	5 5/8"	5 5/8"	3 5/8"	1 3/16"	1/2"	4 3/8"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2"	5 5/8"	5 5/8"	3 5/8"	1 3/16"	1/2"	4 3/8"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 1/2"	6 7/8"	6 7/8"	4 3/16"	1 1/2"	5/8"	5 3/8"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3"	7 3/4"	7 3/4"	4 11/16"	1 5/8"	3/4"	6"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3 1/2"	9 1/4"	9 1/4"	5 1/4"	1 7/8"	3/4"	7"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
4"	10 1/4"	10 1/4"	6 1/2"	2 1/8"	7/8"	7 3/4"	26,900	154,000	6,900	1,500	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
35mm	4 5/8"	4 5/8"	3 1/16"	1 1/16"	1/2"	3 1/2"	6,100	26,000	2,550	3,800	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
40mm	5 3/8"	5 3/8"	3 1/2"	1 3/16"	1/2"	4 1/8"	7,800	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
45mm	5 5/8"	5 5/8"	3 5/8"	1 3/16"	1/2"	4 3/8"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
50mm	5 5/8"	5 5/8"	3 5/8"	1 3/16"	1/2"	4 3/8"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
60mm	6 7/8"	6 7/8"	4 3/16"	1 1/2"	5/8"	5 3/8"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
70mm	7 3/4"	7 3/4"	4 11/16"	1 5/8"	3/4"	6"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
80mm	9 1/4"	9 1/4"	5 1/4"	1 7/8"	3/4"	7"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
90mm	9 1/4"	9 1/4"	5 1/4"	1 7/8"	3/4"	7"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
100mm	10 1/4"	10 1/4"	6 1/2"	2 1/8"	7/8"	7 3/4"	26,900	154,000	6,900	1,500	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000

Mounted Roller Bearings

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Sealed bearings block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

Sealed Tapered-Roller Bearings

Sealed Tapered-Roller Bearing

		Overall			Mounting			Radial Load Cap., lbs.
For Shaft Dia.	Center Ht.	Ht.	Lg.	Wd.	Hole Lg.	Hole Wd.	Hole Ctr.-to-Ctr.	Dynamic	Static	Dynamic Thrust Load Cap., lbs.	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Lubrication		Each
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw
1 1/4"	1 1/2"	3"	6"	2 3/4"	19/32"	9/16"	4 25/32"	3,800	15,700	2,000	4,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	0000000
1 3/8"	1 7/8"	3 3/4"	7 3/8"	3"	3/4"	5/8"	5 3/4"	6,100	26,000	2,550	3,800	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 1/2"	2 1/8"	4 1/4"	7 7/8"	3 3/8"	3/4"	5/8"	6 1/4"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 5/8"	2 1/8"	4 1/4"	7 7/8"	3 3/8"	3/4"	5/8"	6 1/4"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 3/4"	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 7/8"	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2"	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 1/4"	2 3/4"	5 23/32"	10 1/2"	4"	7/8"	3/4"	8 1/2"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 1/2"	2 3/4"	5 23/32"	10 1/2"	4"	7/8"	3/4"	8 1/2"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 3/4"	3 1/8"	6 1/4"	12"	4 1/2"	1"	27/32"	9 1/2"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3"	3 1/8"	6 1/4"	12"	4 1/2"	1"	27/32"	9 1/2"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3 1/2"	3 3/4"	7 1/2"	14"	5"	1 3/16"	1"	11"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
4"	4 1/4"	8 1/2"	15 1/4"	6 1/4"	1 1/8"	7/8"	12 1/2"	26,900	154,000	6,900	1,500	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
35mm	1 7/8"	3 3/4"	7 3/8"	3"	3/4"	5/8"	5 3/4"	6,100	26,000	2,550	3,800	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
40mm	2 1/8"	4 1/4"	7 7/8"	3 3/8"	3/4"	5/8"	6 1/4"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
45mm	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
50mm	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
55mm	2 1/2"	5"	9 5/8"	3 3/4"	7/8"	3/4"	7 3/4"	10,900	48,200	3,450	2,700	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
60mm	2 3/4"	5 23/32"	10 1/2"	4"	7/8"	3/4"	8 1/2"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
65mm	2 3/4"	5 23/32"	10 1/2"	4"	7/8"	3/4"	8 1/2"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
70mm	3 1/8"	6 1/4"	12"	4 1/2"	1"	27/32"	9 1/2"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
80mm	3 3/4"	7 1/2"	14"	5"	1 3/16"	1"	11"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
90mm	3 3/4"	7 1/2"	14"	5"	1 3/16"	1"	11"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
100mm	4 1/4"	8 1/2"	15 1/4"	6 1/4"	1 1/8"	7/8"	12 1/2"	26,900	154,000	6,900	1,500	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000