For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
|
|
Shaft Mount Type Shaft Mount Type |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
|
Environment Environment |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Lubricant Lubricant |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
|
About Ball and Roller Bearings
More
Compact-Base Mounted Ball Bearings
Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.
Set screw shaft-mount bearings secure to shafts when you tighten the set screw, with no need for an additional collar. Set screws cause some amount of marring on shafts.
Concentric lock shaft-mount bearings have a locking collar that centers and secures the shaft in the bearing bore. To install these bearings, tighten the single screw on the locking collar around its inner ring on your shaft. Their firm grip on shafts reduces vibration for quieter operation.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Hole | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Thread Size | Thread Pitch | Dp. | Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||||
| 1/2" | 1 5/16" | 2 9/16" | 3 1/8" | 1 1/2" | 3/8"-16 | __ | 0.5" | 2" | 2,610 | 1,440 | 7,300 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 0000000 |
| 5/8" | 1 5/16" | 2 9/16" | 3 1/8" | 1 1/2" | 3/8"-16 | __ | 0.5" | 2" | 2,610 | 1,440 | 7,300 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 3/4" | 1 5/16" | 2 9/16" | 3 1/8" | 1 1/2" | 3/8"-16 | __ | 0.5" | 2" | 2,610 | 1,440 | 7,300 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1" | 1 7/16" | 2 13/16" | 3" | 1 1/2" | 3/8"-16 | __ | 0.5" | 2" | 2,800 | 1,650 | 6,350 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 1/16" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | __ | 0.625" | 3" | 4,380 | 2,560 | 5,450 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 3/16" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | __ | 0.625" | 3" | 4,380 | 2,560 | 5,450 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 1/4" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | __ | 0.75" | 3 1/4" | 5,780 | 3,490 | 4,650 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 7/16" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | __ | 0.75" | 3 1/4" | 5,780 | 3,490 | 4,650 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 1/2" | 1 15/16" | 3 15/16" | 4 5/8" | 1 7/8" | 1/2"-13 | __ | 0.75" | 3 1/2" | 7,340 | 4,460 | 4,150 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 3/4" | 2 1/8" | 4 1/4" | 5" | 2" | 1/2"-13 | __ | 0.75" | 3 3/4" | 7,900 | 5,130 | 3,800 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 15/16" | 2 1/4" | 4 5/8" | 5 1/2" | 2" | 5/8"-11 | __ | 0.875" | 4" | 7,880 | 5,210 | 3,550 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 2" | 2 1/4" | 4 5/8" | 5 1/2" | 2" | 5/8"-11 | __ | 0.875" | 4" | 7,880 | 5,210 | 3,550 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 20mm | 33.3mm | 65.1mm | 79.4mm | 38.1mm | 3/8"-16 | __ | 12.7mm | 50.8mm | 2,610 | 1,440 | 7,300 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 25mm | 36.5mm | 71.4mm | 76.2mm | 38.1mm | 3/8"-16 | __ | 12.7mm | 50.8mm | 2,800 | 1,650 | 6,350 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 30mm | 42.9mm | 86.5mm | 101.6mm | 38.1mm | 7/16"-14 | __ | 15.9mm | 76.2mm | 4,380 | 2,560 | 5,450 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
Shaft Mount Type: Concentric Lock | ||||||||||||||||
| 3/4" | 1 5/16" | 2 9/16" | 3 1/8" | 1 1/2" | 3/8"-16 | __ | 0.5" | 2" | 2,610 | 1,440 | 10,200 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 1/8" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | __ | 0.625" | 3" | 4,380 | 2,560 | 7,600 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 3/16" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | __ | 0.625" | 3" | 4,380 | 2,560 | 7,600 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 7/16" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | __ | 0.75" | 3 1/4" | 5,780 | 3,490 | 6,500 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 1 15/16" | 2 1/4" | 4 5/8" | 5 1/2" | 2" | 5/8"-11 | __ | 0.875" | 4" | 7,880 | 5,210 | 5,000 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 2" | 2 1/4" | 4 5/8" | 5 1/2" | 2" | 5/8"-11 | __ | 0.875" | 4" | 7,880 | 5,210 | 5,000 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
| 30mm | 42.9mm | 86.5mm | 101.6mm | 38.1mm | M14 | 2 mm | 16mm | 65.9mm | 4,380 | 2,560 | 5,450 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
Washdown Mounted Ball Bearings
Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants. All have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.
Polymer-coated cast iron bearings are also known as tapped-base mounted ball bearings. They require access to the underside of the mounting surface.
Set screw bearings secure to shafts as you tighten their screw. They don’t need a collar, but the screw does leave some marring on shafts.
Concentric lock bearings have a locking collar to center shafts and secure them better than set screw bearings, so there’s less vibration and noise. To install them, tighten the locking collar’s screw so it grips the inner ring.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Thread Size | Hole Thread Type | Hole Dp. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Lubrication | Specifications Met | Each | |
Self Aligning | ||||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||||
| 3/4" | 1 5/16" | 2 9/16" | 3 1/8" | 1 1/2" | 3/8"-16 | UNC | 0.5" | 2" | 2,610 | 1,440 | 3,100 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 0000000 |
| 1" | 1 7/16" | 2 13/16" | 3" | 1 1/2" | 3/8"-16 | UNC | 0.5" | 2" | 2,800 | 1,650 | 2,700 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
| 1 3/16" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | UNC | 0.625" | 3" | 4,380 | 2,560 | 2,300 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
| 1 1/4" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | UNC | 0.625" | 3" | 4,380 | 2,560 | 2,300 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
| 1 1/4" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/4" | 5,780 | 3,490 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
| 1 3/8" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/4" | 5,780 | 3,490 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
| 1 7/16" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/4" | 5,780 | 3,490 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
| 1 1/2" | 1 15/16" | 3 15/16" | 4 5/8" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/2" | 7,340 | 4,460 | 1,750 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
| 1 15/16" | 2 1/4" | 4 5/8" | 5 1/2" | 2" | 5/8"-11 | UNC | 0.875" | 4" | 9,750 | 5,210 | 1,500 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
Shaft Mount Type: Concentric Lock | ||||||||||||||||
| 30mm | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | UNC | 0.625" | 3" | 4,380 | 2,560 | 2,300 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |