Use the extra-long shank to thread deep and hard-to-reach holes.

Sized to cut oversized threads, these tools are often used to tap holes where the threads will shrink due to heat treatment or plating.

Use these taps on hard and abrasive material, such as heat-treated metal, nickel, and fiberglass.

Clear chips while tapping deep and hard-to-reach holes. These taps have an extra-long shank for extended reach.

These taps cut left-hand threads while keeping chips clear.

Also known as cold-forming and fluteless taps, these press threads into material without cutting it, so no chips are created.

Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

With a taper chamfer and bottoming chamfer at opposite ends, these taps start threads easily and are good for threading close to the bottom of closed-end holes.

Create threads sized for pipe and conduit.

Tap left-hand threads for pipe and conduit.

Also known as interrupted-thread taps, these have extra space between the cutting threads, so large chips fall without packing and high amounts of lubricant can flow between the tap and the workpiece.

With a taper chamfer on one threading end and a bottoming chamfer on the other, these pipe and conduit taps can start threads easily, and they are able to thread close to the bottom of closed-end holes.

Cut threads in PG thread sizes commonly used for European conduit.

Tap the unique size needed for garden hose thread (GHT) connections.

Add threads to holes in preparation for installing helical inserts.

Also known as National Gas Outlet (NGO) taps, these tap threads in sizes used for compressed gas cylinders and valves.

One file restores a range of thread sizes in most hole diameters.

Attach these tools to a socket wrench to restore rusted and damaged spark plug threads in two common sizes.

With replaceable dies, these long-lasting tools can repair both screw threads and pipe and conduit threads. Use them for holes with an ID from 3/4" to 6".

For start-to-finish tapping of left-hand threads, these sets include one taper-, one plug-, and one bottoming-chamfer tap.

Create pipe and conduit threads in a range of hole diameters.

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included.