Filter by
Thread Size
Sold As
For Tap Size
System of Measurement
For Tap Type
Flute Type
Thread Type
Container Type
Thread Length
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Thread Direction
Shank Type
Number of Flutes
Drill Out Tap Extractor Sets for Screw Thread Taps
 |
After using a large-diameter bit to drill a starter hole in a broken tap, drill out the tap with one of these tools. Sets include multiple extractors for use with different tap sizes and two picks for removing the remains.
No. of Pieces | Includes | For Tap Size | Overall Lg. | OD | Material | Container Type | Each | ||
|---|---|---|---|---|---|---|---|---|---|
| 7 | Four Tap Extractors, Pin Vise, Two Picks | No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", 7/16", 1/2", M3, M3.5, M4, M5, M6, M7, M8, M10, M12 | 1 1/4" 1 1/2" 2" 2 1/2" | 1/8" 5/64" 3/16" 1/4" | Carbide | Plastic Case | 0000000 | 0000000 |
Tap Extractor Sets for Screw Thread Taps
 |
To extract taps of different sizes, these sets include multiple extractors. Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece.
No. of Pieces | For Three-Flute Tap Size | For Four-Flute Tap Size | Material | Container Type | For Number of Tap Flutes | Each | ||
|---|---|---|---|---|---|---|---|---|
| 6 | — | No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5 | Steel | Plastic Case | 4 | 00000000 | 0000000 | |
| 6 | — | No. 14, 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16 | Steel | Plastic Case | 4 | 00000000 | 000000 | |
| 6 | — | 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", M7, M8, M9, M10, M11, M12, M12.5, M14, M16 | Steel | Plastic Case | 4 | 00000000 | 000000 | |
| 11 | No. 5, No. 6, 1/8", M3, M3.5 | No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20, M22, M24, M25 | Steel | Plastic Case | 3, 4 | 00000000 | 000000 | |
| 13 | No. 4, No. 5, No. 6, 1/8", M3, M3.5 | No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20 | Steel | Plastic Case | 3, 4 | 00000000 | 000000 | |
| 15 | No. 4, No. 5, No. 6, 1/8", M3, M3.5 | No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M2, M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20, M22, M24, M25 | Steel | Plastic Case | 3, 4 | 00000000 | 000000 |
Taps
 |
Cut threads into holes so screws, bolts, and rods fit snugly. Our basic taps have straight flutes that are good for most jobs.
High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
Uncoated—The economical choice, these won't last as long as coated taps.
Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
Number of Flutes—Taps with fewer flutes have more space to capture chips, so you won’t have to clear them as often. However, they can be more difficult to keep straight in the hole.
Taps Sold as Sets—Include one tap of each chamfer type.
Taps | Taps Sold as Sets | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drill Bit | Taper Chamfer | Plug Chamfer | Bottoming Chamfer | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Thread Size | Thread Lg. | Overall Lg. | Thread Type | No. of Flutes | Size, mm | Decimal Size Equiv. | Shank Type | Each | Each | Each | No. of Taps | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Speed Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Uncoated | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/16"-24 | 1 7/16" | 3 5/32" | UNS | 4 | 9.9 | 0.3897" | Square | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 3 | 00000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tap Sets
These sets include a variety of taps for threading holes so screws, bolts, and rods fit snugly.
High-Speed Steel—Single Thread Size Sets
 |
Taper, Plug, and Bottoming Chamfer Set |
The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include one of each chamfer type: Taper for starting holes and threading through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.
Uncoated—The economical choice, these won't last as long as coated taps.
Taper Chamfer, Plug Chamfer, Bottoming Chamfer | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Tap Sizes Included | Thread Type | Container Type | No. of Flutes | Shank Type | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Uncoated | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 | 7/16"-24 | UNS | Plastic Case | 4 | Square | 00000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Drill Out Tap Extractors for Screw Thread Taps
 |
After using a large-diameter bit to drill a starter hole in a broken tap, drill out the tap with one of these tools. Remove the remains with a scriber or pick.
For Tap Size | OD | Overall Lg. | Material | Each | ||
|---|---|---|---|---|---|---|
| 5/16", 3/8", 7/16", 1/2", M8, M10, M12 | 1/4" | 2 1/2" | Carbide | 0000000 | 000000 |
Tap Extractors for Screw Thread Taps
 |
Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece without damaging the surrounding threads.
