McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Compare
    Number of Pieces
    Thread Type
    Chamfer Type
    For Number of Tap Flutes
    Thread Direction
    Industrial Info Compare
    Shank Type
    For Hole Type
    For Threading
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Number of Tapping Ends
    Number of Flutes
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    19 Products

    Tap Sets

    These sets include a variety of taps for threading holes so screws, bolts, and rods fit snugly.
    High-Speed Steel—Single Thread Size Sets
    Image of Product. Taper, Plug, and Bottoming Chamfer Set. Front orientation. Taps. Tap Sets, Single Tap Thread Size.

    Taper, Plug, and Bottoming

    Chamfer Set

    The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include one of each chamfer type: Taper for starting holes and threading through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Taper Chamfer, Plug
    Chamfer, Bottoming Chamfer
    No. of
    Pieces
    Tap Sizes
    Included
    Thread
    Type
    Container
    Type
    No. of
    Flutes
    Shank
    Type
    Each
    Uncoated
    3M4.5Metric
    		Plastic Case4Square00000000000000
     
    Titanium Nitride (TiN) Coated
    3M4.5Metric
    		Plastic Case4Square0000000000000
     
    High-Speed Steel—Multiple Thread Size Sets
    Image of Product. Plug Chamfer Set. Front orientation. Taps. Tap Sets, Multiple Tap Thread Sizes.

    Plug Chamfer Set

    The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include multiple sizes of plug chamfer taps for through holes and blind holes.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Plug Chamfer
    No. of
    Pieces
    Tap Sizes Included
    Thread
    Type
    Container
    Type
    Shank
    Type
    Each
    Uncoated
    101 each of sizes M3 × 0.50 mm, M3.5 × 0.60 mm, M4 × 0.70 mm, M4.5 × 0.75 mm, M5 × 0.80 mm; M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm, and M16 × 2.00 mmMetric
    		Metal CaseSquare000000000000000
     

    Tap Extractor Sets for Screw Thread Taps

    Image of Product. Front orientation. Tap Extractors. Tap Extractor Sets for Screw Thread Taps.
    To extract taps of different sizes, these sets include multiple extractors. Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece.
    No. of
    Pieces
    For Three-Flute Tap Size
    For Four-Flute Tap Size
    Material
    Container
    Type
    For Number
    of Tap Flutes
    Each
    6—No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5SteelPlastic Case4000000000000000
    11No. 5, No. 6, 1/8", M3, M3.5
    		No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20, M22, M24, M25SteelPlastic Case3, 400000000000000
    13No. 4, No. 5, No. 6, 1/8", M3, M3.5
    		No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20SteelPlastic Case3, 400000000000000
    15No. 4, No. 5, No. 6, 1/8", M3, M3.5
    		No. 8, No. 10, No. 12, No. 14, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M2, M4, M4.5, M5, M5.5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M16, M18, M19, M20, M22, M24, M25SteelPlastic Case3, 400000000000000

    Taps

    Image of Product. Front orientation. Taps. Taps.
    Cut threads into holes so screws, bolts, and rods fit snugly. Our basic taps have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
    Number of Flutes—Taps with fewer flutes have more space to capture chips, so you won’t have to clear them as often. However, they can be more difficult to keep straight in the hole.
    Taps Sold as Sets—Include one tap of each chamfer type.
    Taps
    Taps Sold as Sets
    Drill Bit
    Taper Chamfer
    Plug Chamfer
    Bottoming
    Chamfer
    Thread Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size,
    mm
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Each
    Each
    No. of
    Taps
    Each
    High-Speed Steel
     
    Uncoated
    M4.5 × 0.75 mm7/8"2 3/8"Metric
    		43.7
    		0.1456"Square000000000000000000000000000000000000000300000000000000
     
    Titanium Nitride (TiN) Coated
    M4.5 × 0.75 mm7/8"2 3/8"Metric
    		43.7
    		0.1456"Square00000000000000000000000000000000000000030000000000000
     

    Chip-Clearing Taps

    Image of ProductInUse. Front orientation. Taps. Chip-Clearing Taps, Spiral-Point Flute for Through Holes.

    Spiral-Point Flute for Through Holes

    Remove long, stringy chips to produce cleaner threads than standard taps. The flute design prevents buildup to protect the quality of the threads and avoid damage to the tap. Since you don’t need to reverse these taps to extract chips, they also create threads faster.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Spiral-Point Flute for Through Holes—Push chips ahead of the tap and out of through holes. Also known as gun taps.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Drill Bit
    Spiral-Point Flute
    for Through Holes
    Thread Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    Size,
    mm
    Decimal Size
    Equiv.
    Shank
    Type
    Chamfer
    Type
    No. of
    Flutes
    Each
    High-Speed Steel
     
    Uncoated
    M4.5 × 0.75 mm7/8"2 3/8"Metric
    		3.7
    		0.1456"SquarePlug20000000000000
     
    Titanium Nitride (TiN) Coated
    M4.5 × 0.75 mm7/8"2 3/8"Metric
    		3.7
    		0.1456"SquarePlug20000000000000
     

    Tap Extractors for Screw Thread Taps

    Image of Product. Front orientation. Tap Extractors. Tap Extractors for Screw Thread Taps.
    Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece without damaging the surrounding threads.
    Tap Extractors
    Replacement Tap Extractor Fingers
    For Tap Size
    Material
    Square Shank
    Size
    Choose a Number
    of Tap Flutes
    Each
    Choose a Number
    of Tap Flutes
    Pkg.
    Qty.
    Pkg.
    No. 10, 3/16", M4.5, M5
    		Steel0.11"
    2
    ,
    3
    ,
    4
    		00000000000000
    2
    ,
    3
    ,
    4
    		1200000000000000

    Left-Hand Thread Taps

    Image of Product. Front orientation. Taps. Left-Hand Thread Taps.
    Create left-hand threads that prevent counter-clockwise rotating parts, such as flywheels and propellers, from loosening and spinning off. These taps have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Drill Bit
    Plug Chamfer
    Thread Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size,
    mm
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    M4.5 × 0.75 mm7/8"2 3/8"Metric
    		43.7
    		0.1457"Square000000000000000
     

    Long-Reach Taps

    Image of Product. Front orientation. Taps. Long-Reach Taps.
    Thread holes that are hard to access or where obstructions make it difficult to turn a tap wrench. About twice as long other taps, these get you inside machines or through assemblies such as pulleys and belts. They have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Drill Bit
    Shank
    Plug Chamfer
    Thread Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size,
    mm
    Decimal Size
    Equiv.
    Type
    Dia.
    Each
    High-Speed Steel
     
    Uncoated
    M4.5 × 0.75 mm7/8"6"Metric
    		43.8
    		0.1535"Square0.194"00000000000000
     
    back to top