McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    5 Products

    Tap and Die Sets

    Image of Product. Front orientation. Tap and Die Sets.
    Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.
    Carbon Steel—Carbon steel taps are for thread repair and occasional tapping.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Hex—Hex-shaped dies are for thread repair and can be used with conventional wrenches.
    No. of
    Pieces
    Tap Sizes Included
    Tap Chamfer
    Type
    Die
    Shape
    Die Sizes Included
    Wd.
    Container
    Type
    Includes
    Each
    Carbon Steel Taps and Dies
     
    Right-Hand Thread
    521/4"-19, 1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mmPlug, TaperHex1/8"-28, 1/4"-19, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm1", 1 7/16"Plastic CaseDie Wrench (2), Tap Wrench (3), Thread Gauge2726A660000000
     

    Pipe and Conduit Taps

    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    Add internal threads to pipe and conduit or components such as manifolds. They have straight flutes that are good for most jobs.
    BSPT ThreadAbout BSPT Thread
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Bottoming
    Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size,
    mm
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1/4
    		1 1/16"2 7/16"41911.2
    		0.4409"Square8328A12000000
     
    Titanium Nitride (TiN) Coated
    1/4
    		1 1/16"2 7/16"41911.2
    		0.4409"Square4478N2100000
     

    Pipe and Conduit Tap Sets

    Image of Product. Front orientation. Taps. Pipe and Conduit Tap Sets.
    A range of sizes for adding internal threads to pipe and conduit. These taps can also be used to thread components like manifolds. They have straight flutes that are good for most jobs.
    Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.
    No. of
    Pieces
    Pipe Size
    Thread Type
    Chamfer
    Type
    No. of
    Flutes
    Container
    Type
    Shank
    Type
    Each
    Carbon Steel
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    		BSPT, Metric
    		Plug4, 5Fabric PouchSquare2765A5120000000
     

    Chip-Clearing Pipe and Conduit Taps for Steel and Stainless Steel

    Made of a high-vanadium alloy, these taps are harder and more wear-resistant than other high-speed steel taps. The widely spaced flutes prevent buildup that can ruin threads and keep pipe and conduit from making strong connections. Also known as interrupted-thread taps.
    BSPT ThreadAbout BSPT Thread
    Image of Product. Front orientation. Taps. Chip-Clearing Pipe and Conduit Taps for Steel and Stainless Steel.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Drill Bit
    Bottoming
    Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size,
    mm
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1/4
    		1 3/32"2 7/16"31911.8
    		0.4646"Square2663A68000000
     
    back to top