These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Suspend these lights overhead or mount them above your workspace.

Aim light where it's needed most in areas that don't have an electrical outlet.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Hang these lights where you need them on the job site.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.

Brighten areas of a jobsite with these floodlights, and move them at a moment’s notice.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

No need for wiring—these lights plug into a standard wall outlet. Also known as shop lights.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

Powered by the sun, these lights illuminate outbuildings, shipping containers, and other remote places that lack electricity.

Fit traditional fluorescent ceiling strip lights with LED lights, which use less electricity.

Upgrade your fluorescent recessed lighting to energy-efficient LEDs without removing fixtures and exposing insulation.

Maximize the light that reaches your shelving. Often used in storage rooms and warehouse rack rows, these lights have reflectors that direct all light downwards from ceilings up to 24 ft. high.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

Install sockets for medium (standard household) screw-in base light bulbs.

Illuminate steps to reduce the risk of tripping or falling, especially at night or in poorly lit areas.

Customize these lights to label doors or areas of a building.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Mount lights in recessed spaces so the lens is flush with the wall.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Also known as grow lights, these lights encourage growth in herbs, flowers, and other plants indoors.

Illuminate harsh, wet areas, even outside in extreme weather—these lights are often used on ship building ports. Rated NEMA 4X and UL marine listed, they’re sealed against heavy rain and washdowns, and they won’t corrode from salt water or other liquids.

A sealed lens keeps moisture out to protect these lights against washdowns.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Brighten your ISO Class 3 clean room with long rows of lights—you can wire these lights together at the ends. They have an airtight seal that keeps contaminants from entering your space.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

Plug in these flashlights and they’ll automatically light up when the power goes out. There’s no need to regularly replace the batteries—they recharge on the base when it’s plugged into an outlet.

If the power goes out, you’ll find these flashlights right away.

Always have a flashlight on hand—these attach to a key ring.

The smooth stainless steel surface allows for easy cleaning.

Light up objects more than a quarter of a mile away. These flashlights are also known as searchlights.

All of these flashlights stand up to wet environments.

Attach mini and full-size flashlights to a hard hat and keep your hands free to work.

Free your hands for other work by mounting a flashlight to a nearby surface.

Safely light up work in explosion-prone areas. Rated NEC Class I, these flashlights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Keep your hands free by wearing a flashlight on your head.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.

Gently bend these single-use lightsticks to activate.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Heads adjust to any angle so you can direct light where needed.

Hardwire these lights to a power source.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

Also known as wall packs, these lights mount to exterior walls and ceilings.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Connect the battery pack to your existing fluorescent light to convert it into an emergency backup light.

Mount add-on heads in remote areas to extend emergency lighting.

No need for wiring—these lights plug-in with a two-prong plug.