About Nuts, Materials, and Finishes
More
Steel Tee Nut Inserts for Wood
These inserts have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
Zinc-plated steel inserts are mildly corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||
10-24 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 000000 |
18-8 Stainless Steel Tee Nut Inserts for Wood
These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel inserts. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
10-24 | 0.319" | 0.232" | 9/32" | 3/4" | 0.038" | 15/64" | 15/64" | 10 | 000000000 | 00000 |
316 Stainless Steel Tee Nut Inserts for Wood
The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||||
10-24 | 0.319" | 0.232" | 9/32" | 3/4" | 0.038" | 7/32" | 7/32" | 10 | 000000000 | 00000 |
Split-Resistant Tee Nut Inserts for Hardwood
Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs. Hammer them into a drilled hole to install. Installed length includes the flange.
Zinc-plated steel inserts are mildly corrosion resistant in wet environments.
Black-oxide steel inserts have a dark surface color and are mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||
10-24 | 0.227" | 0.243" | 3/16" | 3/4" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 000000 |
10-24 | 0.32" | 0.243" | 9/32" | 3/4" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-24 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-24 | 0.414" | 0.243" | 3/8" | 3/4" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-24 | 0.477" | 0.243" | 7/16" | 45/64" | 0.039" | 1/4" | 1/4" | 100 | 000000000 | 00000 |
10-24 | 0.602" | 0.243" | 9/16" | 3/4" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
Black-Oxide Steel | ||||||||||
10-24 | 0.227" | 0.243" | 3/16" | 3/4" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 00000 |
10-24 | 0.352" | 0.243" | 5/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 00000 |
10-24 | 0.414" | 0.243" | 3/8" | 3/4" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
10-24 | 0.477" | 0.243" | 7/16" | 45/64" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
10-24 | 0.602" | 0.243" | 9/16" | 3/4" | 0.039" | 1/4" | 1/4" | 25 | 000000000 | 0000 |
Twist-Resistant Tee Nut Inserts for Softwood
Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting. They’re zinc-plated steel for mild corrosion resistance. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Ultra-Split-Resistant Tee Nut Inserts for Hardwood
Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings. Hammer them into a drilled hole to install. Installed length includes the flange.
Zinc-plated steel inserts are mildly corrosion resistant.
Black-oxide steel inserts have a dark surface color and are mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Secure-Grip Tee Nut Inserts for Softwood
Hooked prongs give these tee nut inserts excellent holding power even when removing screws. Use them in softwood such as particleboard. They’re zinc-plated steel for mild corrosion resistance. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel | Flange | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Installed Lg. | Dia. | Lg. | Wd. | Lg. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
10-24 | 0.414" | 0.28" | 3/8" | 11/16" | 45/64" | 0.039" | 1/4" | 1/4" | 50 | 000000000 | 000000 |
Low-Profile Narrow-Base Weld Nuts
Use these weld nuts in low-clearance applications and in tight spaces where round-base weld nuts won't fit. Weld them to flat and uneven uncoated steel surfaces for a strong permanent hold.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thick. | Dia. | Ht. | For Hole Dia. | Pkg. Qty. | Pkg. | |
Steel | |||||||||
10-24 | 7/8" | 7/16" | 3/32" | 15/64" | 1/32" | 1/4" | 25 | 000000000 | 00000 |
Low-Profile Narrow-Base Weld Nuts with Projections
Projections concentrate the weld and provide room for heat to dissipate. Weld them to flat stainless steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thick. | Dia. | Ht. | For Hole Dia. | No. of Projections | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
10-24 | 5/8" | 3/8" | 3/32" | 15/64" | 1/32" | 1/4" | 2 | 10 | 000000000 | 00000 |
Steel Narrow-Base Weld Nuts
These nuts have a long barrel for secure thread engagement. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
Zinc-plated steel weld nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Narrow-Base Weld Nuts
Weld these nuts on flat stainless steel surfaces for a strong permanent hold. They have a long barrel for secure thread engagement. Use them in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | |||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thick. | Dia. | Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
10-24 | 3/4" | 1/2" | 3/64" | 15/64" | 9/32" | 10 | 000000000 | 000000 |
Steel Offset-Barrel Narrow-Base Weld Nuts
An offset barrel allows you to position threads near corners. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
Zinc-plated steel weld nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Offset-Barrel Narrow-Base Weld Nuts
These weld nuts have an offset barrel so you can position threads near corners. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Wd. | Thick. | Dia. | Ht. | For Hole Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
10-24 | 5/8" | 3/8" | 3/32" | 15/64" | 1/32" | 1/4" | 10 | 000000000 | 000000 |
Steel Round-Base Weld Nuts
A smooth base provides more contact with the mating surface than weld nuts with projections. The base also acts as a flange to distribute the load. A long barrel ensures secure thread engagement.
Zinc-plated steel weld nuts are corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Round-Base Weld Nuts
A smooth base provides more contact with stainless steel surfaces than weld nuts with projections. The base also acts as a flange to distribute the load. A long barrel ensures secure thread engagement.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | ||||||
---|---|---|---|---|---|---|---|
Thread Size | Dia. | Thick. | Dia. | Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||
10-24 | 3/4" | 3/64" | 0.234" | 9/32" | 10 | 000000000 | 000000 |
Round-Base Weld Nuts with Projections
Projections on the base concentrate the weld and provide room for heat to dissipate. Weld them to flat uncoated steel surfaces for a strong permanent hold. The round base acts as a flange to distribute the load. A long barrel ensures secure thread engagement.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | |||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Dia. | Thick. | Dia. | Ht. | No. of Projections | Pkg. Qty. | Pkg. | |
Steel | ||||||||
10-24 | 3/4" | 3/64" | 0.25" | 9/32" | 3 | 50 | 000000000 | 000000 |
Square Weld Nuts
Square weld nuts have more weld points than hex weld nuts for a stronger hold. Weld them on flat uncoated steel surfaces. All have a collar pilot that assists alignment and prevents welding spatter from getting into threads.
Nuts that meet ASME B1.1 comply with specifications for dimensional standards.
For technical drawings and 3-D models, click on a part number.
Collar | |||||||||
---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd. | Ht. | Dia. | Ht. | For Hole Dia. | Specifications Met | Pkg. Qty. | Pkg. | |
Steel | |||||||||
10-24 | 7/16" | 9/64" | 15/64" | 0.046" | 1/4" | ASME B1.1 | 25 | 000000000 | 000000 |
Steel Hex Weld Nuts
Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold. A collar pilot assists alignment and prevents welding spatter from getting into threads.
All nuts meet ASME B1.1 and comply with specifications for dimensional standards.
For technical drawings and 3-D models, click on a part number.
Collar | |||||||||
---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd. | Ht. | Dia. | Ht. | For Hole Dia. | Specifications Met | Pkg. Qty. | Pkg. | |
Steel | |||||||||
10-24 | 1/2" | 3/16" | 13/32" | 0.04" | 27/64" | ASME B1.1 | 25 | 000000000 | 000000 |
Aligning Weld Nuts
Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Weld these nuts to materials for a strong permanent hold or punch holes in the flanges and secure them with rivets.
Weld steel nuts with steel retainer to steel parts.
For technical drawings and 3-D models, click on a part number.
Base | |||||||
---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thick. | Ht. | Pkg. Qty. | Pkg. | |
Steel Nut with C1008/C1010 Steel Retainer | |||||||
10-24 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 000000 |
Screw-Mount Nuts
These nuts have three mounting holes to accept screws and rivets. Insert the barrel through a hole or fasten the base with the barrel facing upward for use with thin materials. The longer the barrel, the more thread engagement with your screw.
Zinc-plated steel nuts are corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thread Size | Dia. | Thick. | Dia. | Ht. | Mounting Hole Dia. | Pkg. Qty. | Pkg. | ||
Zinc-Plated Steel | |||||||||
A | 10-24 | 3/4" | 1/32" | 1/4" | 9/32" | 7/64" | 25 | 000000000 | 000000 |