Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs. Hammer them into a drilled hole to install. Installed length includes the flange.

Zinc-plated steel inserts are mildly corrosion resistant in wet environments.

Black-oxide steel inserts have a dark surface color and are mildly corrosion resistant in dry environments.

For technical drawings and 3-D models, click on a part number.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings. Hammer them into a drilled hole to install. Installed length includes the flange.

Unfinished steel inserts are best for dry environments, since moisture will cause them to rust. They are ready for painting.

Zinc-plated steel inserts are mildly corrosion resistant.

Black-oxide steel inserts have a dark surface color and are mildly corrosion resistant in dry environments.

For technical drawings and 3-D models, click on a part number.

Hooked prongs give these tee nut inserts excellent holding power even when removing screws. Use them in softwood such as particleboard. They’re zinc-plated steel for mild corrosion resistance. Hammer them into a drilled hole to install. Installed length includes the flange.

For technical drawings and 3-D models, click on a part number.

Projections concentrate the weld and provide room for heat to dissipate. Weld them to flat stainless steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.

For technical drawings and 3-D models, click on a part number.

Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold. A collar pilot assists alignment and prevents welding spatter from getting into threads.

For technical drawings and 3-D models, click on a part number.

Weld these nuts to flat and uneven stainless steel surfaces for a strong permanent hold. They have a collar pilot that assists alignment and prevents welding spatter from getting into threads.

For technical drawings and 3-D models, click on a part number.

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Weld them on flat uncoated steel surfaces. All have a collar pilot that assists alignment and prevents welding spatter from getting into threads.

For technical drawings and 3-D models, click on a part number.

These nuts have three mounting holes to accept screws and rivets. Insert the barrel through a hole or fasten the base with the barrel facing upward for use with thin materials. The longer the barrel, the more thread engagement with your screw.

For technical drawings and 3-D models, click on a part number.

These screw-mount nuts are often used to attach glides and levels to wood. Made from zinc alloy, they're corrosion resistant in wet environments.

For technical drawings and 3-D models, click on a part number.

Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.

Fully threaded nuts allow a stud to extend beyond the bottom of the nut. Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.

Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.

For technical drawings and 3-D models, click on a part number.

For mounting items to your machine table, these kits contain the full system of necessary components. Choose the kit with slot width matching that of your table.

Each kit includes T-slot nuts, setup studs, flange nuts, coupling nuts, and a T-slot cleaning tool.

Get everything needed for basic workholding on a machine table. Select a kit that matches your table's slot width. Each kit includes studs, setup clamps, step blocks, T-slot nuts, flange nuts, coupling nuts, and a T-slot cleaning tool.