M10 Tee Nuts | McMaster-Carr

Clear All

	System of Measurement System of Measurement

Metric

	Thread Size Thread Size	Show

M10

	Thread Size Thread Size	Hide

	Thread Pitch Thread Pitch

1.5 mm

	For Slot Width For Slot Width

	Material Material

Steel

Stainless Steel

	Finish Finish

Zinc Plated

Black Oxide

	Base Width Base Width

	Threading Threading

Fully Threaded

Partially Threaded

	Base Height Base Height

	Overall Height Overall Height

	For Use In For Use In

Hardwood

Softwood

	Nut Type Nut Type


Flange	Weld

Adhesive Mount	Square

Hex

	Weld Nut Shape Weld Nut Shape

	Rectangular
	Round
	Square
	Hex

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

	Thread Fit Thread Fit

Class 2B

Class 6G

Class 6H

	Installed Length Installed Length

12 mm or greater

	Barrel Profile Barrel Profile

	Low
	Standard

	Thread Type Thread Type

Metric

	For Minimum Material Thickness For Minimum Material Thickness

10 mm or greater

	Barrel Diameter Barrel Diameter

	Flange Diameter Flange Diameter

25.4mm

	For Maximum Hole Diameter For Maximum Hole Diameter

0.4" to 0.499"

11.5mm

	Barrel Length Barrel Length

11.5mm

13mm

View catalog pages (7)

Forward

How can we improve?

30 Products

About Nuts, Materials, and Finishes

Zinc-Plated Steel

These inserts have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.

Zinc-plated steel inserts are mildly corrosion resistant in wet environments.

For technical drawings and 3-D models, click on a part number.

Metric

			Barrel, mm		Flange, mm
Thread Size	Thread Pitch, mm	Installed Lg., mm	Dia.	Lg.	Dia.	Thick.	Drill Bit Size	For Max. Hole Dia.	Pkg. Qty.		Pkg.
Zinc-Plated Steel
M10	1.5	14.5	11.1	13	25.4	1.5	11.5 mm	11.5 mm	25	000000000	000000

18-8 Stainless Steel Tee Nut Inserts for Wood

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel inserts. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.

For technical drawings and 3-D models, click on a part number.

Metric

			Barrel, mm		Flange, mm
Thread Size	Thread Pitch, mm	Installed Lg., mm	Dia.	Lg.	Dia.	Thick.	Drill Bit Size	For Max. Hole Dia.	Pkg. Qty.		Pkg.
18-8 Stainless Steel
M10	1.5	13	11.4	11.5	25.4	1.5	31/64"	31/64"	5	000000000	000000

316 Stainless Steel Tee Nut Inserts for Wood

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.

For technical drawings and 3-D models, click on a part number.

Metric

			Barrel, mm		Flange, mm
Thread Size	Thread Pitch, mm	Installed Lg., mm	Dia.	Lg.	Dia.	Thick.	Drill Bit Size	For Max. Hole Dia.	Pkg. Qty.		Pkg.
316 Stainless Steel
M10	1.5	13	11.4	11.5	25.4	1.5	31/64"	31/64"	5	000000000	000000

Low-Profile Narrow-Base Weld Nuts

Use these weld nuts in low-clearance applications and in tight spaces where round-base weld nuts won't fit. Weld them to flat and uneven uncoated steel surfaces for a strong permanent hold.

For technical drawings and 3-D models, click on a part number.

Metric

Thread		Base			Barrel
Size	Pitch, mm	Lg., mm	Wd., mm	Thick., mm	Dia., mm	Ht., mm	For Hole Dia., mm	Pkg. Qty.		Pkg.
Steel
M10	1.5	38	16	3.6	11.8	2.4	12.2	10	000000000	000000

Metric Steel Narrow-Base Weld Nuts

A long barrel provides secure thread engagement. Weld these nuts to flat, uncoated steel surfaces for a strong, permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.

For technical drawings and 3-D models, click on a part number.

Thread		Base			Barrel
Size	Pitch, mm	Lg., mm	Wd., mm	Thick., mm	Dia., mm	Ht., mm	Pkg. Qty.		Pkg.
Steel
M10	1.5	25.4	15.9	1.6	11.5	11.1	25	000000000	000000

Stainless Steel Narrow-Base Weld Nuts

Weld these nuts on flat stainless steel surfaces for a strong permanent hold. They have a long barrel for secure thread engagement. Use them in channels and tight spaces where round-base weld nuts won't fit.

For technical drawings and 3-D models, click on a part number.

Metric

Thread		Base			Barrel
Size	Pitch, mm	Lg., mm	Wd., mm	Thick., mm	Dia., mm	Ht., mm	Pkg. Qty.		Pkg.
18-8 Stainless Steel
M10	1.5	25.4	16.7	1.9	12.3	11.1	10	000000000	000000

Steel Offset-Barrel Narrow-Base Weld Nuts

An offset barrel allows you to position threads near corners. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.

Zinc-plated steel weld nuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Metric

Thread		Base			Barrel
Size	Pitch, mm	Lg., mm	Wd., mm	Thick., mm	Dia., mm	Ht., mm	For Hole Dia., mm	Pkg. Qty.		Pkg.
Zinc-Plated Steel
M10	1.5	28.5	16	3.6	11.8	2.4	11.9	10	000000000	00000
Steel
M10	1.5	28.5	16	3.6	11.8	2.4	11.9	10	000000000	0000

Metric Steel Round-Base Weld Nuts

These weld nuts have a smooth base that provides more contact with the mating surface than weld nuts with projections. The base also acts as a flange to distribute the load. A long barrel ensures secure thread engagement.

For technical drawings and 3-D models, click on a part number.

Thread		Base		Barrel
Size	Pitch, mm	Dia., mm	Thick., mm	Dia., mm	Ht., mm	Pkg. Qty.		Pkg.
Steel
M10	1.5	25.4	1.6	11.5	11.1	50	000000000	000000

Square Weld Nuts

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Weld them on flat uncoated steel surfaces. All have a collar pilot that assists alignment and prevents welding spatter from getting into threads.

For technical drawings and 3-D models, click on a part number.

Metric

Thread
Size	Pitch, mm	Wd., mm	Ht., mm	For Hole Dia., mm	Specifications Met	Pkg. Qty.		Pkg.
Steel
M10	1.5	17	6.8	15.6	DIN 928	25	000000000	00000

Metric Steel Hex Weld Nuts

You can weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold. A collar pilot assists alignment and prevents welding spatter from getting into threads.

For technical drawings and 3-D models, click on a part number.

Thread				Collar
Size	Pitch, mm	Wd., mm	Ht., mm	Dia., mm	Ht., mm	For Hole Dia., mm	Specifications Met	Pkg. Qty.		Pkg.
Steel
M10	1.5	17	6.85	12.5	1.15	12.5	DIN 929	25	000000000	000000

Metric Stainless Steel Hex Weld Nuts

You can weld these nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold. They have a collar pilot that assists alignment and prevents welding spatter from getting into threads.

For technical drawings and 3-D models, click on a part number.

Thread				Collar
Size	Pitch, mm	Wd., mm	Ht., mm	Dia., mm	Ht., mm	For Hole Dia., mm	Specifications Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel
M10	1.5	17	6.9	12.5	1.15	12.5	DIN 929	10	000000000	00000

Stainless Steel Adhesive-Mount Nuts

These nuts have excellent resistance to chemicals and salt water. Large holes in the base to allow adhesive to flow through. They’re often molded into plastics and used to add threads to plastic that is too thin to fit a threaded insert.

For technical drawings and 3-D models, click on a part number.

Metric

Thread		Base		Nut
Size	Pitch, mm	Dia., mm	Thick., mm	Wd., mm	Ht., mm	Hole Dia., mm	Pkg. Qty.		Pkg.
316 Stainless Steel
M10	1.5	23	1.2	16.84	7.8	5	5	000000000	000000
M10	1.5	38	1.2	16.84	7.8	4, 5	5	000000000	00000

Steel Adhesive-Mount Nuts

Large holes in the base allow adhesive to flow through. These nuts are often molded into plastics and used to add threads to plastic that is too thin to fit a threaded insert. A zinc plating provides corrosion resistance in wet environments.

For technical drawings and 3-D models, click on a part number.

Metric

Thread		Base		Nut
Size	Pitch, mm	Dia., mm	Thick., mm	Wd., mm	Ht., mm	Hole Dia., mm	Pkg. Qty.		Pkg.
Zinc-Plated Steel
M10	1.5	23	1.2	16.94	7.8	5	10	000000000	00000
M10	1.5	38	1.2	16.94	7.8	4, 5	10	000000000	0000

T-Slot Nuts

Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.

Fully threaded nuts allow a stud to extend beyond the bottom of the nut. Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.

Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.

Metric

			Base				Fully Threaded		Partially Threaded
Thread Size	Thread Pitch, mm	For Slot Wd., mm	Ht., mm	Wd., mm	O'all Ht., mm	Specifications Met		Each		Each
Black-Oxide Steel
M10	1.5	12	7	19	13	__	000000000	00000	000000000	00000
M10	1.5	14	9	22	16	__	000000000	0000	000000000	0000
M10	1.5	16	9	25	18	DIN 508	000000000	0000	000000	00
M10	1.5	18	10	28	20	DIN 508	000000000	00000	000000	00
18-8 Stainless Steel
M10	1.5	12	7	18	14	DIN 508	000000000	0000	000000	00

Drop-In T-Slot Nuts

Install these nuts from the top of the T-slot track and secure with a quarter turn to anchor clamps and workpieces. Also known as quarter-turn T-slot nuts.

Fully threaded nuts allow a stud to extend beyond the bottom of the nut.

For technical drawings and 3-D models, click on a part number.

Metric

Thread			Base			Fully Threaded
Size	Pitch, mm	For Slot Wd., mm	Ht., mm	Wd., mm	O'all Ht., mm		Each
Black-Oxide Steel
M10	1.5	12	7	18	14	000000000	00000

Secure-Hold T-Slot Nuts

After sliding the nut into a T-slot track, tighten the set screw to keep it in place. Use these nuts to secure clamps and workpieces in a machine table. They’re fully threaded to allow a stud to extend beyond the bottom of the nut.

For technical drawings and 3-D models, click on a part number.

Metric

Thread			Base			Drive			Fully Threaded
Size	Pitch, mm	For Slot Wd., mm	Ht., mm	Wd., mm	O'all Ht., mm	Size, mm	Style	Includes		Each
Black-Oxide Steel
M10	1.5	14	8.5	22.4	22.2	5	Hex	Set Screw	000000000	000000

T-Slot Nut and Setup Stud Kits

For mounting items to your machine table, these kits contain the full system of necessary components. Choose the kit with slot width matching that of your table.

Each kit includes T-slot nuts, setup studs, flange nuts, coupling nuts, and a T-slot cleaning tool.

			T-Slot Nut				Setup Stud
For Slot Wd.	No. of Pieces	Includes	Threading	Base Ht.	Base Wd.	Overall Ht.	Threading	Min.Tensile Strength, psi	Material		Each
M10 Thread Size × 1.5mm Thread Pitch
12mm	37	4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner	Partially Threaded	7mm	19mm	13mm	Threaded on Both Ends	125,000	Black-Oxide Steel	0000000	0000000
14mm	37	4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner	Partially Threaded	9mm	22mm	16mm	Threaded on Both Ends	125,000	Black-Oxide Steel	0000000	000000

Setup Clamp and T-Slot Fastener Kits

Wall-Mount Steel Holder

Get everything needed for basic workholding on a machine table. Select a kit that matches your table's slot width. Each kit includes studs, setup clamps, step blocks, T-slot nuts, flange nuts, coupling nuts, and a T-slot cleaning tool.

			Step Block
For Slot Wd., mm	No. of Pieces	Includes	Ht. Range, mm	Wd., mm	T-Slot Nut Base Wd., mm	Material	Container Type		Each
M10 × 1.5 mm Thread Size
12	53	24 Studs (4 each in 80 mm, 110 mm, 125 mm, 150 mm, 175 mm, and 200 mm lengths) 6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths) 3 Step Block Pairs 6 T-Slot Nuts 6 Flange Nuts 4 Coupling Nuts T-Slot Cleaner	19-152	25	19	Steel	Wall-Mount Steel Holder	0000000	0000000
14	49	24 Studs (4 each in 80 mm, 110 mm, 125 mm, 150 mm, 175 mm, and 200 mm lengths) 6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths) 3 Step Block Pairs 6 T-Slot Nuts 6 Flange Nuts 4 Coupling Nuts T-Slot Cleaner	19-152	25	22	Steel	Wall-Mount Steel Holder	0000000	000000

Lathe Chuck Jaw Nuts

Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.

Jaw nuts with M6, M8, M10, M12, M16, and M20 threads fit most chucks made by Kitagawa, LMC, Samchully, Seoam, Auto Strong, and other brands.

For technical drawings and 3-D models, click on a part number.

Jaw Nuts with Metric Threads

		Thread		Base
For Lathe Chuck Dia.	For Slot Wd.	Size	Pitch, mm	Ht.	Lg.	Wd.	Overall Ht.	For Serration Size	Mounting Hole Ctr.-to-Ctr.	Material		Each
6"	0.472"	M10	1.5	19/64"	1 13/32"	11/16"	23/32"	1.5 mm × 60°	0.787"	Steel	0000000	000000