System of Measurement System of Measurement |
---|
|
Thread Size Thread Size | Show |
---|
Thread Size Thread Size | Hide |
---|
Material Material |
---|
|
For Slot Width For Slot Width |
---|
|
Fastener Type Fastener Type |
---|
|
Weld Nut Shape Weld Nut Shape |
---|
![]() | ![]() |
Rectangular | Round |
![]() | ![]() |
Hex | Square |
Color Color |
---|
![]() | Black |
Nut Type Nut Type |
---|
![]() | ![]() |
Flange | Weld |
![]() | ![]() |
Adhesive Mount | Hex |
![]() | |
Square |
Thread Type Thread Type |
---|
|
Mounting Fastener Installation Type Mounting FastenerInstallation Type |
---|
|
Finish Finish |
---|
|
Thread Direction Thread Direction |
---|
![]() | Right Hand |
Thread Spacing Thread Spacing |
---|
|
More
These inserts have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
Zinc-plated steel inserts are mildly corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Barrel, mm | Flange, mm | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Installed Lg., mm | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
M5 | 0.8 | 9.15 | 6.2 | 8 | 17 | 1.15 | 6.4 mm | 6.4 mm | 100 | 000000000 | 000000 |
These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel inserts. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel, mm | Flange, mm | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Installed Lg., mm | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||
M5 | 0.8 | 8 | 6.2 | 7 | 17 | 1 | 5/32" | 5/32" | 10 | 000000000 | 000000 |
The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
Barrel, mm | Flange, mm | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Installed Lg., mm | Dia. | Lg. | Dia. | Thick. | Drill Bit Size | For Max. Hole Dia. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||||||
M5 | 0.8 | 8 | 6.2 | 7 | 17 | 1 | 5/32" | 5/32" | 10 | 000000000 | 00000 |
A long barrel provides secure thread engagement. Weld these nuts to flat, uncoated steel surfaces for a strong, permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
Zinc-plated steel weld nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Wd., mm | Thick., mm | Dia., mm | Ht., mm | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
M5 | 0.8 | 19.1 | 12.7 | 1 | 6.2 | 7.9 | 50 | 000000000 | 00000 |
Weld these nuts on flat stainless steel surfaces for a strong permanent hold. They have a long barrel for secure thread engagement. Use them in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Wd., mm | Thick., mm | Dia., mm | Ht., mm | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
M5 | 0.8 | 19.1 | 12.7 | 1 | 6.8 | 7.1 | 10 | 000000000 | 00000 |
Projections concentrate the weld and provide room for heat to dissipate. Weld them to flat stainless steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Wd., mm | Thick., mm | Dia., mm | Ht., mm | For Hole Dia., mm | No. of Projections | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||
M5 | 0.8 | 16 | 9.6 | 2.4 | 6 | 0.8 | 6 | 2 | 10 | 000000000 | 00000 |
These weld nuts have an offset barrel so you can position threads near corners. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg. | Wd., mm | Thick., mm | Dia. | Ht., mm | For Hole Dia., mm | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
M5 | 0.8 | 15.9 | 9.6 | 2.4 | 6 | 0.8 | 6.4 | 10 | 000000000 | 00000 |
An offset barrel allows you to position threads near corners. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
Zinc-plated steel weld nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
These weld nuts have a smooth base that provides more contact with the mating surface than weld nuts with projections. The base also acts as a flange to distribute the load. A long barrel ensures secure thread engagement.
Zinc-plated steel weld nuts are corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | ||||||
---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Dia., mm | Thick., mm | Dia., mm | Ht., mm | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||
M5 | 0.8 | 19.1 | 1 | 6.2 | 7.9 | 50 | 000000000 | 000000 |
You can weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold. A collar pilot assists alignment and prevents welding spatter from getting into threads.
For technical drawings and 3-D models, click on a part number.
Thread | Collar | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Dia., mm | Ht., mm | For Hole Dia., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Steel | ||||||||||
M5 | 0.8 | 10 | 3.3 | 7 | 0.7 | 7 | DIN 929 | 100 | 000000000 | 000000 |
You can weld these nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold. They have a collar pilot that assists alignment and prevents welding spatter from getting into threads.
For technical drawings and 3-D models, click on a part number.
Thread | Collar | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Dia., mm | Ht., mm | For Hole Dia., mm | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
M5 | 0.8 | 10 | 3.3 | 7 | 0.7 | 7 | DIN 929 | 50 | 000000000 | 00000 |
Square weld nuts have more weld points than hex weld nuts for a stronger hold. Weld them on flat uncoated steel surfaces. All have a collar pilot that assists alignment and prevents welding spatter from getting into threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | For Hole Dia., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Steel | ||||||||
M5 | 0.8 | 9 | 3.4 | 8.2 | DIN 928 | 100 | 000000000 | 000000 |
These nuts have excellent resistance to chemicals and salt water. Large holes in the base to allow adhesive to flow through. They’re often molded into plastics and used to add threads to plastic that is too thin to fit a threaded insert.
For technical drawings and 3-D models, click on a part number.
Large holes in the base allow adhesive to flow through. These nuts are often molded into plastics and used to add threads to plastic that is too thin to fit a threaded insert. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut.
For technical drawings and 3-D models, click on a part number.
Base | Fully Threaded | |||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Specifications Met | Each | |
Black-Oxide Steel | ||||||||
M5 | 0.8 | 6 | 4 | 10 | 8 | DIN 508 | 000000000 | 00000 |
Screws and nuts secure brackets and other accessories to rails.
For technical drawings and 3-D models, click on a part number.
End-feed fasteners slide into the end of the rail to attach components.
Use double and triple fasteners to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.