System of Measurement System of Measurement |
---|
|
Thread Size Thread Size | Show |
---|
Thread Size Thread Size | Hide |
---|
Thread Pitch Thread Pitch |
---|
|
Thread Type Thread Type |
---|
|
Material Material |
---|
|
Weld Nut Shape Weld Nut Shape |
---|
![]() | ![]() |
Rectangular | Round |
![]() | ![]() |
Hex | Square |
![]() | |
Rectangular with Floating Nut |
Nut Type Nut Type |
---|
![]() | ![]() |
Flange | Weld |
![]() | ![]() |
Adhesive Mount | Hex |
![]() | |
Square |
Threading Threading |
---|
|
Finish Finish |
---|
|
Thread Direction Thread Direction |
---|
![]() | Right Hand |
Thread Spacing Thread Spacing |
---|
|
More
These inserts have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
Zinc-plated steel inserts are mildly corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel inserts. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water. They have four prongs on the flange to resist twisting in hardwood and softwood. Hammer them into a drilled hole to install. Installed length includes the flange.
For technical drawings and 3-D models, click on a part number.
A long barrel provides secure thread engagement. Weld these nuts to flat, uncoated steel surfaces for a strong, permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Weld these nuts on flat stainless steel surfaces for a strong permanent hold. They have a long barrel for secure thread engagement. Use them in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Wd., mm | Thick., mm | Dia., mm | Ht., mm | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
M6 | 1 | 19.1 | 12.7 | 1.3 | 7.7 | 7.9 | 10 | 000000000 | 00000 |
Use these weld nuts in low-clearance applications and in tight spaces where round-base weld nuts won't fit. Weld them to flat and uneven uncoated steel surfaces for a strong permanent hold.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Wd., mm | Thick., mm | Dia., mm | Ht., mm | For Hole Dia., mm | Pkg. Qty. | Pkg. | |
Steel | ||||||||||
M6 | 1 | 28.5 | 13 | 3.2 | 7.6 | 1.2 | 8 | 10 | 000000000 | 000000 |
Projections concentrate the weld and provide room for heat to dissipate. Weld them to flat stainless steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Wd., mm | Thick., mm | Dia., mm | Ht., mm | For Hole Dia., mm | No. of Projections | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||
M6 | 1 | 20.5 | 13 | 3.2 | 7.6 | 1.2 | 7.6 | 2 | 10 | 000000000 | 000000 |
These weld nuts have an offset barrel so you can position threads near corners. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Barrel | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg. | Wd., mm | Thick., mm | Dia. | Ht., mm | For Hole Dia., mm | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
M6 | 1 | 20.6 | 12.9 | 3.2 | 7.6 | 1.3 | 8 | 10 | 000000000 | 000000 |
An offset barrel allows you to position threads near corners. Weld them to flat uncoated steel surfaces for a strong permanent hold. They can be used in channels and tight spaces where round-base weld nuts won't fit.
Zinc-plated steel weld nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
These weld nuts have a smooth base that provides more contact with the mating surface than weld nuts with projections. The base also acts as a flange to distribute the load. A long barrel ensures secure thread engagement.
For technical drawings and 3-D models, click on a part number.
You can weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold. A collar pilot assists alignment and prevents welding spatter from getting into threads.
For technical drawings and 3-D models, click on a part number.
Thread | Collar | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Dia., mm | Ht., mm | For Hole Dia., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Steel | ||||||||||
M6 | 1 | 11 | 4.25 | 8 | 0.75 | 8 | DIN 929 | 50 | 000000000 | 00000 |
You can weld these nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold. They have a collar pilot that assists alignment and prevents welding spatter from getting into threads.
For technical drawings and 3-D models, click on a part number.
Thread | Collar | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Dia., mm | Ht., mm | For Hole Dia., mm | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
M6 | 1 | 11 | 4.3 | 8 | 0.75 | 8 | DIN 929 | 25 | 000000000 | 00000 |
Square weld nuts have more weld points than hex weld nuts for a stronger hold. Weld them on flat uncoated steel surfaces. All have a collar pilot that assists alignment and prevents welding spatter from getting into threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | For Hole Dia., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Steel | ||||||||
M6 | 1 | 10 | 4.2 | 9.1 | DIN 928 | 100 | 000000000 | 00000 |
Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Weld these nuts to uncoated steel for a strong permanent hold or punch holes in the flanges and secure them with rivets. The retainer is made from C1008-C1010 steel.
For technical drawings and 3-D models, click on a part number.
Thread | Base | |||||||
---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Wd., mm | Thick., mm | Ht., mm | Pkg. Qty. | Pkg. | |
Steel Nut with C1008/C1010 Steel Retainer | ||||||||
M6 | 1 | 38.1 | 12.7 | 1.06 | 8.6 | 10 | 000000000 | 000000 |
These nuts have excellent resistance to chemicals and salt water. Large holes in the base to allow adhesive to flow through. They’re often molded into plastics and used to add threads to plastic that is too thin to fit a threaded insert.
For technical drawings and 3-D models, click on a part number.
Large holes in the base allow adhesive to flow through. These nuts are often molded into plastics and used to add threads to plastic that is too thin to fit a threaded insert. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut. Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.
For technical drawings and 3-D models, click on a part number.
Base | ||||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Specifications Met | Each | |
Fully Threaded | ||||||||
Black-Oxide Steel | ||||||||
M6 | 1 | 8 | 6 | 14 | 10 | __ | 000000000 | 00000 |
M6 | 1 | 10 | 6 | 16 | 11 | __ | 000000000 | 0000 |
18-8 Stainless Steel | ||||||||
M6 | 1 | 8 | 6 | 13 | 10 | DIN 508 | 000000000 | 0000 |
Partially Threaded | ||||||||
Black-Oxide Steel | ||||||||
M6 | 1 | 8 | 6 | 14 | 10 | __ | 000000000 | 0000 |
M6 | 1 | 10 | 6 | 16 | 11 | __ | 000000000 | 0000 |
Install these nuts from the top of the T-slot track and secure with a quarter turn to anchor clamps and workpieces. Also known as quarter-turn T-slot nuts.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut.
For technical drawings and 3-D models, click on a part number.
Thread | Base | Fully Threaded | |||||
---|---|---|---|---|---|---|---|
Size | Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Each | |
Black-Oxide Steel | |||||||
M6 | 1 | 8 | 6 | 13 | 10 | 000000000 | 00000 |
After sliding the nut into a T-slot track, tighten the set screw to keep it in place. Use these nuts to secure clamps and workpieces in a machine table. They’re fully threaded to allow a stud to extend beyond the bottom of the nut.
Screws and nuts secure brackets and other accessories to rails.
For technical drawings and 3-D models, click on a part number.
End-feed fasteners slide into the end of the rail to attach components.
Use double and triple fasteners to install brackets with multiple holes. They eliminate the need for a single nut and screw for each hole.