Filter by
Shape
Fitting Connection
Material
Tube Material
Tee Type
For Use With
Nut Material
Sleeve Material
Maximum Pressure @ Temperature
Maximum Temperature
DFARS Specialty Metals
Maximum Vacuum @ Temperature
Minimum Temperature
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Precision Compression Fittings for Stainless Steel Tubing
- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. Also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are 316 stainless steel for excellent corrosion resistance. A molybdenum disulfide coating on the nut acts as a lubricant for easy installation.
Inline Tee Adapters, Tube × Male NPT Threaded Pipe
Inline tees are also known as branch tees.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Max. Pressure | Each | |
| 1/8" | 0.035" | 1/8 | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 000000 |
| 1/8" | 0.035" | 1/4 | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 |
| 3/16" | 0.035" | 1/8 | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | 1/8 | 316 Stainless Steel | 4,000 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 0.035" | 1/4 | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 00000 |
| 5/16" | 0.035" | 1/4 | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/4 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 3/8 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/2 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 000000 |
| 1/2" | 0.035" | 1/2 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 00000 |
| 5/8" | 0.049" | 1/2 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 00000 |
| 3/4" | 0.049" | 3/4 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 000000 |
Inline Tee Adapters, Tube × Female NPT Threaded Pipe
Inline tees are also known as branch tees.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Max. Pressure | Each | |
| 1/8" | 0.035" | 1/8 | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 000000 |
| 1/8" | 0.035" | 1/4 | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 000000 |
| 1/4" | 0.035" | 1/8 | 316 Stainless Steel | 4,000 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 0.035" | 1/4 | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | 3/8 | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 000000 |
| 1/4" | 0.035" | 1/2 | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 000000 |
| 3/8" | 0.035" | 1/4 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 3/8 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 000000 |
| 3/8" | 0.035" | 1/2 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 000000 |
| 1/2" | 0.035" | 1/2 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 00000 |
| 5/8" | 0.049" | 1/2 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 000000 |
| 3/4" | 0.049" | 3/4 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 000000 |
Right-Angle Tee Adapters, Tube × Male NPT Threaded Pipe
Right-angle tees are also known as run tees.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Max. Pressure | Each | |
| 1/8" | 0.035" | 1/8 | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 000000 |
| 1/8" | 0.035" | 1/4 | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | 1/8 | 316 Stainless Steel | 4,000 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 0.035" | 1/4 | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/4 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 3/8 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/2 | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 000000 |
| 1/2" | 0.035" | 1/2 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 00000 |
| 5/8" | 0.049" | 1/2 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 000000 |
| 3/4" | 0.049" | 3/4 | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 000000 |
Tee Connectors, Tube
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | Each | |
| 1/16" | 0.02" | 316 Stainless Steel | 7,500 psi @ 72° F | 0000000 | 000000 |
| 1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 |
| 3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 00000 |
| 5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 00000 |
| 5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 00000 |
| 3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 0000000 | 000000 |
Nuts
For Tube | ||||
|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | |
| 1/16" | 0.02" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 |
| 1/8" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
| 3/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
| 1/4" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 |
| 5/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 |
| 3/8" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 |
| 1/2" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 5/8" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 3/4" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
Sleeves
For Tube | ||||
|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | |
| 1/16" | 0.02" | 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 |
| 1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
| 3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
| 1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 |
| 5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 |
| 3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 |
| 1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
| 3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
Compression Fittings for Stainless Steel Tubing
A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings or bite fittings. Use them in low- to medium-pressure applications.
316 stainless steel fittings have excellent corrosion resistance.
ISO and DIN fittings meet international dimensional standards.
Tee Connectors, Tube
- For Use With:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Air, Hydraulic Fluid, Water
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water - Temperature Range:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: -420° to 1200° F
316 Stainless Steel: -75° to 750° F - Tubing:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Use with seamless 304 or 316 stainless steel that meets ASTM A269
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1 - Specifications Met:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: SAE J514
316 Stainless Steel: DIN 2353, ISO 8434
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Sleeve Material | Max. Pressure | Each | |
| 6mm | 1mm | 316 Stainless Steel | 316 Stainless Steel | 7,200 psi @ 72° F | 0000000 | 000000 |
| 8mm | 1-1.5mm | 316 Stainless Steel | 316 Stainless Steel | 7,200 psi @ 72° F | 0000000 | 00000 |
| 10mm | 1-2mm | 316 Stainless Steel | 316 Stainless Steel | 7,200 psi @ 72° F | 0000000 | 00000 |
| 12mm | 1-2mm | 316 Stainless Steel | 316 Stainless Steel | 5,800 psi @ 72° F | 0000000 | 00000 |
| 15mm | 1-2mm | 316 Stainless Steel | 316 Stainless Steel | 5,800 psi @ 72° F | 0000000 | 000000 |
Nuts
- For Use With: See table
- Temperature Range: See table
- Tubing: See table
- Specifications Met: See table
For Tube | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | For Use With | Temp. Range, °F | For Tube Material | For Tube Specifications Met | For Tube Fabrication | Specifications Met | Each | |
| 6mm | 1mm | 316 Stainless Steel | 7,200 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 00000 |
| 8mm | 1-1.5mm | 316 Stainless Steel | 7,200 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 0000 |
| 10mm | 1-2mm | 316 Stainless Steel | 7,200 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 0000 |
| 12mm | 1-2mm | 316 Stainless Steel | 5,800 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 0000 |
| 15mm | 1-2mm | 316 Stainless Steel | 5,800 psi @ 72° F | Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water | -75° to 750° | 304 Stainless Steel, 316/316L/316Ti Stainless Steel | DIN EN 10216-5, DIN EN 10305-1 | Seamless | DIN 2353, ISO 8434-1 | 0000000 | 00000 |
Sleeves
- For Use With:
17-4 PH Stainless Steel: Air, Hydraulic Fluid, Water
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water - Temperature Range:
17-4 PH Stainless Steel: -420° to 1200° F
316 Stainless Steel: -75° to 750° F - Tubing:
17-4 PH Stainless Steel: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1 - Specifications Met:
17-4 PH Stainless Steel: SAE J514
316 Stainless Steel: ISO 8434-1, DIN 2353
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | Each | |
| 15mm | 1-2mm | 316 Stainless Steel | 5,800 psi @ 72° F | 0000000 | 00000 |
Nickel-Plated Brass Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Lubricants, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -75° to 550° F, except 90° elbow adapters with BSPP threads are 0° to 170° F
- Tubing: Use with copper
- Specifications Met: DIN 3861, except nuts meet DIN 3870
With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings. They have a single sleeve (ferrule) made of plain brass that gently bites into copper tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. These fittings are also known as flareless fittings. All meet DIN standards for tube fitting dimensions.
Inline Tee Adapters, Tube × Male Threaded Pipe
Inline Tee Adapter, Tube × Male Threaded Pipe
Inline tees are also known as branch tees.
Right-Angle Tee Adapters, Tube × Male Threaded Pipe
Right-Angle Tee Adapter, Tube × Male Threaded Pipe
Right-angle tees are also known as run tees.
Nuts
Nut
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Maximum Pressure | Length, mm | Each | |
Short Nuts | ||||||
| 4 | 1 | Nickel-Plated Brass | 1,800 psi @ 72° F | 11 | 00000000 | 00000 |
| 6 | 1 | Nickel-Plated Brass | 2,500 psi @ 72° F | 12 | 00000000 | 000 |
| 8 | 1 | Nickel-Plated Brass | 2,100 psi @ 72° F | 12 | 00000000 | 000 |
| 10 | 1 | Nickel-Plated Brass | 1,600 psi @ 72° F | 16 | 00000000 | 0000 |
| 12 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 16 | 00000000 | 0000 |
Precision Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -40° to 350° F
- Tubing: Use with seamless copper that meets ASTM B68, ASTM B75, or ASTM B88
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. They are also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are brass for good corrosion resistance.
Fittings with a molybdenum-disulfide brass nut are easy to install because the coating acts as a lubricant.
Inline Tee Adapters, Tube × Male Threaded Pipe
Inline tees are also known as branch tees.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Nut Material | Max. Pressure | Each | |
NPT Threads | |||||||
| 1/8" | 0.028" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 00000000 | 000000 |
| 1/8" | 0.035" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 0.028" | 3/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.028" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | 1/8 | Brass | Brass | 1,600 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 5/16" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
| 3/8" | 0.035" | 3/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
| 3/8" | 0.035" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 0.049" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 5/8" | 0.065" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,300 psi @ 72° F | 0000000 | 00000 |
| 3/4" | 0.065" | 3/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 0000000 | 000000 |
Inline Tee Adapters, Tube × Female Threaded Pipe
Inline tees are also known as branch tees.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Nut Material | Max. Pressure | Each | |
NPT Threads | |||||||
| 1/8" | 0.028" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 00000000 | 000000 |
| 1/8" | 0.035" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 0000000 | 00000 |
| 3/16" | 0.028" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 000000 |
| 1/4" | 0.028" | 3/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.028" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 5/16" | 0.035" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 5/16" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
| 3/8" | 0.035" | 3/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 0.049" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 5/8" | 0.065" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,300 psi @ 72° F | 0000000 | 00000 |
| 3/4" | 0.065" | 3/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
Right-Angle Tee Adapters, Tube × Male Threaded Pipe
Right-angle tees are also known as run tees.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Nut Finish | Max. Pressure | Each | |
NPT Threads | |||||||
| 1/8" | 0.028" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 00000000 | 000000 |
| 1/8" | 0.035" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 0000000 | 00000 |
| 3/16" | 0.028" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.028" | 3/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.028" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 0.035" | 1/8 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 1/4" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 5/16" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | 1/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
| 3/8" | 0.035" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 0.049" | 1/2 | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 0000000 | 00000 |
| 3/4" | 0.065" | 3/4 | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 0000000 | 000000 |
Tee Connectors, Tube
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Nut Material | Max. Pressure | Each | |
| 1/8" | 0.035" | Brass | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 00000000 | 000000 |
| 1/4" | 0.035" | Brass | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 0.035" | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
| 5/8" | 0.065" | Brass | Molybdenum-Disulfide-Coated Brass | 1,300 psi @ 72° F | 00000000 | 00000 |
| 3/4" | 0.065" | Brass | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
Nuts
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Each | |
| 1/8" | 0.035" | Molybdenum-Disulfide-Coated Brass | 2,700 psi @ 72° F | 00000000 | 00000 |
| 3/16" | 0.035" | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 1/4" | 0.035" | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/16" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 3/8" | 0.035" | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
| 1/2" | 0.049" | Molybdenum-Disulfide-Coated Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/8" | 0.065" | Molybdenum-Disulfide-Coated Brass | 1,300 psi @ 72° F | 00000000 | 0000 |
| 3/4" | 0.065" | Molybdenum-Disulfide-Coated Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
Front and Back Sleeves
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | Each | |
| 1/8" | 0.035" | Brass | 2,700 psi @ 72° F | 00000000 | 00000 |
| 3/16" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 1/4" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/16" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 3/8" | 0.035" | Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
| 1/2" | 0.049" | Brass | 1,200 psi @ 72° F | 00000000 | 0000 |
| 5/8" | 0.065" | Brass | 1,300 psi @ 72° F | 00000000 | 0000 |
| 3/4" | 0.065" | Brass | 1,000 psi @ 72° F | 00000000 | 0000 |