How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Easy-Access CPVC Pipe Fittings for Chemicals
- For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Hydrochloric Acid, Phosphoric Acid, Salt Water, Sodium Hydroxide, Sulfuric Acid (80%), Water
- Temperature Range: 32° to 200° F
- Specifications Met: ASTM D1784
- Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic
Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings are CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances. They are comparable to Corzan. Fittings meet ASTM D1784 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
Inline tees are also known as branch tees.
.
Clamp connectors let you connect CPVC grooved-end pipe fittings and pipe.
For Pipe Size | For Pipe OD | Material | Color | Gasket Material | Max. Pressure | Specifications Met | Each | |
2 | 2 3/8" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |
3 | 3 1/2" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 00000 |
4 | 4 1/2" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 00000 |
Clamp adapters let you connect CPVC grooved-end pipe fittings and pipe to metal grooved-end pipe fittings and pipe.
Clamp reducers allow you to connect CPVC grooved-end pipe fittings and pipe and transition from a larger pipe size to a smaller pipe size.
For Pipe Size | For Pipe OD | Material | Color | Gasket Material | Max. Pressure | Specifications Met | Each | |
3 × 2 | 3 1/2" × 2 3/8" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |
4 × 2 | 4 1/2" × 2 3/8" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |
4 × 3 | 4 1/2" × 3 1/2" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |
Fiberglass Pipe Fittings for Corrosive Chemicals
- For Use With: Acetic Acid (75%), Alcohol, Calcium Chloride, Chlorine, Fuel Oil, Gasoline, Hydrochloric Acid (37%), Nitric Acid (10%), Oil, Phosphoric Acid, Salt Water (30%), Sodium Hydroxide (50%), Solvents, Sulfuric Acid (70%), Water
- Temperature Range: 32° to 200° F
- Specifications Met: ASTM D3567
These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals. Fittings meet ASTM D3567 specifications for product dimensions.
To connect fittings to pipe, first sand the inside of the fitting and the end of the pipe to remove the surface finish. Next, mix the adhesive (sold separately) until the color is uniform with no streaks. Apply a thin layer of mixed adhesive to the sanded area of the pipe, approximately 1/8” thick. Repeat this process with the inside of the fitting, applying a layer approximately 1/16” thick. After sealant has been applied, push the fitting onto the pipe until it is fully engaged. Finally, use the adhesive-curing heat cable (sold separately) to cure the adhesive. Wrap the tape around the pipe and fitting at the joint, taking care to not overlap the tape. Once you have waited the full cure time, the pipe and fitting will be ready to use.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Voltage | Max. Heat Output, °F | Lg. | Wd. | Thick. | Plug Type | Cord Lg. | Each | |
120V AC | 270° | 6 ft. | 1" | 1/8" | Two Prong | 6 ft. | 0000000 | 0000000 |
37° Flared Fittings for Stainless Steel Tubing
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They are 316 stainless steel for excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Inline tees are also known as branch tees.
For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/4" | 1/8 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
1/4" | 1/4 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
5/16" | 1/4 | 316 Stainless Steel | 8,000 psi @ 72° F | 000000000 | 000000 |
3/8" | 1/4 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
3/8" | 3/8 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
1/2" | 3/8 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
1/2" | 1/2 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
5/8" | 1/2 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
3/4" | 3/4 | 316 Stainless Steel | 4,000 psi @ 72° F | 000000000 | 000000 |
1" | 1 | 316 Stainless Steel | 3,000 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
Inline tees are also known as branch tees.
For Tube OD | Material | Max. Pressure | Each | |
1/4" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
5/16" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
3/8" | 316 Stainless Steel | 4,500 psi @ 72° F | 000000000 | 00000 |
1/2" | 316 Stainless Steel | 4,000 psi @ 72° F | 000000000 | 000000 |
3/4" | 316 Stainless Steel | 3,500 psi @ 72° F | 000000000 | 000000 |
1" | 316 Stainless Steel | 2,500 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
Right-angle tees are also known as run tees.
For Tube OD | Material | Max. Pressure | Each | |
1/4" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
5/16" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
3/8" | 316 Stainless Steel | 4,500 psi @ 72° F | 000000000 | 00000 |
1/2" | 316 Stainless Steel | 4,000 psi @ 72° F | 000000000 | 000000 |
5/8" | 316 Stainless Steel | 4,000 psi @ 72° F | 000000000 | 000000 |
3/4" | 316 Stainless Steel | 3,500 psi @ 72° F | 000000000 | 000000 |
1" | 316 Stainless Steel | 2,500 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
For Tube OD | Material | Max. Pressure | Each | |
1/8" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
1/4" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
5/16" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
3/8" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
1/2" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
5/8" | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
3/4" | 316 Stainless Steel | 4,500 psi @ 72° F | 000000000 | 000000 |
1" | 316 Stainless Steel | 3,500 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
For Tube OD | Nut Material | Each | |
1/8" | 316 Stainless Steel | 000000000 | 000000 |
1/4" | 316 Stainless Steel | 000000000 | 0000 |
5/16" | 316 Stainless Steel | 000000000 | 00000 |
3/8" | 316 Stainless Steel | 000000000 | 0000 |
1/2" | 316 Stainless Steel | 000000000 | 0000 |
5/8" | 316 Stainless Steel | 000000000 | 00000 |
3/4" | 316 Stainless Steel | 000000000 | 00000 |
1" | 316 Stainless Steel | 000000000 | 00000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
For Tube OD | ||||
---|---|---|---|---|
Inch | Metric, mm | Sleeve Material | Each | |
Inch | ||||
1/8" | __ | 316 Stainless Steel | 000000000 | 00000 |
1/4" | __ | 316 Stainless Steel | 000000000 | 0000 |
5/16" | __ | 316 Stainless Steel | 000000000 | 0000 |
3/8" | __ | 316 Stainless Steel | 000000000 | 0000 |
1/2" | __ | 316 Stainless Steel | 000000000 | 00000 |
5/8" | __ | 316 Stainless Steel | 000000000 | 00000 |
3/4" | __ | 316 Stainless Steel | 000000000 | 00000 |
1" | __ | 316 Stainless Steel | 000000000 | 00000 |
Inch × Metric | ||||
1/4" | 6 | 316 Stainless Steel | 000000000 | 00000 |
5/16" | 8 | 316 Stainless Steel | 000000000 | 00000 |
3/8" | 10 | 316 Stainless Steel | 000000000 | 00000 |
1/2" | 12 | 316 Stainless Steel | 000000000 | 00000 |
Cleaned and Bagged 37° Flared Fittings for Stainless Steel Tubing
- For Use With:
NPT Threads: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
UN/UNF (SAE Straight) Threads: Air, Isopropyl Alcohol, Water - Temperature Range:
NPT Threads: -420° to 1200° F
UN/UNF (SAE Straight) Threads: -15° to 400° F - Tubing: Use with seamless or welded 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: SAE J514, ISO 8434
Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness. Also known as JIC (Joint Industrial Council) fittings, they provide a tight metal-to-metal seal on tubing that is flared to 37°. They are 316 stainless steel for excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately and are not cleaned and bagged.
UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. They are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
Inline tees are also known as branch tees.
For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/4" | 1/8 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
1/4" | 1/4 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
3/8" | 1/4 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 00000 |
3/8" | 3/8 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |
1/2" | 1/2 | 316 Stainless Steel | 5,000 psi @ 72° F | 000000000 | 000000 |