Filter by
For Material Thickness
Depth Under Flange
Flange Diameter
Performance
Grommet Washer Type
RoHS
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Military Specification
Tooth Style
Fabric Grommets
Add a protective metal ring to a hole so rope and cable don’t tear your tarp, cover, or curtain. To install, strike a cutting punch with a mallet to create the hole, then set the grommet using either an installation punch or a press. All of these grommets can be used outdoors. Installation tools are sold separately.
Standard Washer
![]() |
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Aluminum—Keep large tarps and other surfaces lightweight where you're installing lots of grommets.
Stainless Steel—Our most corrosion-resistant fabric grommets, they last the longest when exposed to sun, rain, dirt, and grease.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Specs. Met | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | NASM20230 | 50 | 9604K21 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM20230 | 50 | 9604K22 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM20230 | 50 | 9604K23 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | NASM20230 | 50 | 9604K24 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM20230 | 50 | 9604K25 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | NASM20230 | 50 | 9604K26 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | NASM20230 | 25 | 9604K27 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | NASM20230 | 10 | 9604K28 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | NASM16491 | 50 | 86625K31 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 86625K32 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 86625K33 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 86625K34 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 50 | 86625K35 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | NASM16491 | 25 | 86625K36 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | NASM16491 | 25 | 86625K37 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | NASM16491 | 10 | 86625K38 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | — | 50 | 8264K2 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | — | 50 | 8264K11 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | — | 50 | 8264K12 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | — | 50 | 8264K13 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | — | 50 | 8264K14 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | — | 50 | 8264K15 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | — | 50 | 96015K31 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | — | 25 | 96015K32 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | — | 25 | 96015K33 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tooth-Lock Washer
![]() |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Specs. Met | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 9605K21 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 9605K22 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 9605K23 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 50 | 9605K24 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.295" | 1/2" | 1.05" | 0.374" | Yes | NASM16491 | 50 | 9605K25 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | 0.251" | 5/8" | 1.22" | 0.33" | Yes | NASM16491 | 25 | 9605K26 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 9604K31 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 9604K32 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 9604K33 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 25 | 9604K34 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Snap-In Fabric Grommets
![]() |
The only fabric grommets we sell that don’t need setting tools. Just snap the two parts into a pre-cut hole. The grommets add a protective plastic ring to the hole so rope and cable don’t tear your tarp, cover, or curtain. They grip securely enough for most jobs, but for a stronger hold in high-strain applications, choose our metal grommets instead.
Polycarbonate—Unlike polypropylene grommets, these grommets keep their strength and impact resistance at sub-freezing temperatures.
Polypropylene—These withstand a wider range of chemicals than polycarbonate grommets, but they can't handle the same extreme temperatures.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | Color | Temp., ° F | For Use Outdoors | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Polycarbonate | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.203" | 3/8" | 1 1/8" | 13/32" | Black | -150 to 250 | Yes | 10 | 96135K49 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Polypropylene | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.025" | 1/2" | 1 1/8" | 15/64" | Black | 30 to 180 | Yes | 25 | 96135K54 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.025" | 1/2" | 1 1/8" | 15/64" | White | 30 to 180 | Yes | 50 | 96135K55 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reinforcing Fabric Grommets
These grommets handle thick materials and strain from fabric that’s frequently pulled or stretched. Strike a cutting punch with a mallet to create the hole, then set the grommet using either an installation punch or a press. Installation tools are sold separately.
Extended-Neck Washer
![]() |
An extended neck gives these washers a stronger hold than our other fabric grommets.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Specs. Met | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 50 | 8271K31 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 50 | 8271K32 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 50 | 8271K33 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 50 | 8271K34 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 50 | 8271K35 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.296" | 1/2" | 1.05" | 0.374" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 25 | 8271K36 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | AN230, MIL-G-16491 | NASM20230 | 50 | 9604K35 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | AN230, MIL-G-16491 | NASM20230 | 50 | 9604K36 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | AN230, MIL-G-16491 | NASM20230 | 50 | 9604K37 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | AN230, MIL-G-16491 | NASM20230 | 50 | 9604K38 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | AN230, MIL-G-16491 | NASM20230 | 25 | 9604K39 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rolled Rim with Tooth-Lock Washer
![]() |
Teeth grip the fabric for an even stronger hold than other reinforcing fabric grommets. Use these washers for fabric under the highest strain, such as a tarp secured by bungee cords.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Stainless Steel—Our most corrosion-resistant fabric grommets, they last the longest when exposed to sun, rain, dirt, and grease.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Specs. Met | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | AN230, MIL-G-16491 | NASM20230 | 50 | 9606K41 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | AN230, MIL-G-16491 | NASM20230 | 50 | 9606K42 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | AN230, MIL-G-16491 | NASM20230 | 25 | 9606K43 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | AN230, MIL-G-16491 | NASM20230 | 25 | 9606K44 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | AN230, MIL-G-16491 | NASM20230 | 25 | 9606K45 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | AN230, MIL-G-16491 | NASM20230 | 10 | 9606K46 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | AN230, MIL-G-16491 | NASM20230 | 5 | 9606K47 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | AN230, MIL-G-16491 | NASM20230 | 5 | 9606K48 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | AN230, MIL-G-16491 | NASM20230 | 5 | 9606K49 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 50 | 87995K51 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 25 | 87995K52 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 25 | 87995K53 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 25 | 87995K54 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 10 | 87995K55 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 10 | 87995K56 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 5 | 87995K57 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 5 | 87995K58 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | AN230, MIL-G-16491 | NASM16491, NASM20230 | 5 | 87995K59 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | — | — | 10 | 96075K41 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | — | — | 10 | 96075K47 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | — | — | 5 | 96075K43 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | — | — | 5 | 96075K48 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | — | — | 5 | 96075K44 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flexible Stainless Steel Edge Trim
![]() |
![]() |
Loop this trim around the inside a hole like a grommet to protect wire, cable, and cords from rough or sharp edges. It also prevents denting and abrasion on the angled, curved, and irregular edges rigid metal trim can't handle. The corrosion-resistant stainless steel keeps its strength and finish through rain, dirt and grime, and washing with chemicals.
Nylon-Coated Stainless Steel—The smooth coating is less likely to mar or scratch the surface than uncoated stainless steel trim. However, uncoated trim stays strong and flexible at temperatures almost three times as high.
Inside | Outside | 5 ft. Long | 25 ft. Long | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Temp. Range, ° F | For Use Outdoors | Flammability Rating | Color | Each | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/16" | 3/16" | 13/64" | 1/8" | -40 to 800 | Yes | UL 94 V-0 | Gray | 11745T71 | 000000 | 11745T72 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" | 3/16" | 13/64" | 3/16" | -40 to 800 | Yes | UL 94 V-0 | Gray | 11745T73 | 00000 | 11745T74 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nylon-Coated Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/64" | 3/16" | 1/8" | 13/64" | -40 to 280 | Yes | UL 94 V-0 | Black | 11745T51 | 00000 | 11745T11 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/16" | 3/16" | 1/8" | 13/64" | -40 to 280 | Yes | UL 94 V-0 | Black | 11745T52 | 00000 | 11745T12 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flexible Stainless Steel Edge Trim with Cushion
![]() |
Alternating Teeth |
![]() |
Parallel Teeth |
![]() |
Add a protective cushion to angled, curved, and irregular metal edges to protect people and parts when they bump against it. You can also loop this flexible trim into a hole like a grommet to guard wire, cable, and cords from rough or sharp edges. The corrosion-resistant stainless steel keeps its strength and finish through rain, dirt and grime, and washing with chemicals.
Nylon-Coated Stainless Steel—The smooth coating is less likely to mar or scratch the surface than uncoated stainless steel trim. However, uncoated trim stays strong and flexible at temperatures almost three times as high.
Alternating Teeth—This trim bends forward over 90°, but it doesn't bend sideways. Use it on angled or curved edges that don't turn to the side, such as enclosure cutouts.
Parallel Teeth—With twice the grip strength of trim with alternating teeth, this trim stays put through heavier vibration and shocks. It also bends sideways up to 90°, so one strip will conform to a complex or cylindrical profile, such as a U-channel or pipe end.
Inside | Outside | 5 ft. Long | 25 ft. Long | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Temp. Range, ° F | For Use Outdoors | Mil. Spec. | Flammability Rating | Color | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nylon-Coated Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Alternating Teeth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/32" | 3/16" | 3/16" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T101 | 000000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/64" | 3/16" | 3/16" | 15/64" | -40 to 180 | Yes | — | UL 94 V-0 | Black | 11745T61 | 00000 | 11745T22 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/16" | 3/16" | 3/16" | 15/64" | -40 to 180 | Yes | — | UL 94 V-0 | Black | 11745T62 | 00000 | 11745T23 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/64" | 3/16" | 15/64" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T102 | 00000 | 11745T108 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/32" | 3/16" | 15/64" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T103 | 00000 | 11745T109 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" | 3/16" | 15/64" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T104 | 00000 | 11745T111 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/16" | 3/16" | 21/64" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T105 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" | 1/8" | 23/64" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T106 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Parallel Teeth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/32" | 3/16" | 3/16" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T114 | 00000 | 11745T121 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/64" | 3/16" | 3/16" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T115 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/16" | 3/16" | 3/16" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T116 | 00000 | 11745T123 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/64" | 3/16" | 9/32" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T117 | 00000 | 11745T124 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/32" | 3/16" | 9/32" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T118 | 00000 | 11745T125 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" | 3/16" | 9/32" | 15/64" | -40 to 180 | Yes | MIL-STD-202 | UL 94 V-0 | Black | 11745T119 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fabric Grommet Kits
Kits include grommets of a single size and all the tools you need to install them. The grommets add a protective metal ring to a hole so rope and cable don’t tear your tarp, cover, or curtain. Strike the cutting punch with a mallet to create a hole, then set the grommet using the installation punch and die set.
Standard Washer
![]() | ![]() |
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Includes | No. of Grommets | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.1" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K31 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.1" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K32 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K13 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.21" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 12 | 9610K34 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.29" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 12 | 9610K35 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tooth-Lock Washer
![]() | ![]() |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Includes | No. of Grommets | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0 | 0.11" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 48 | 9610K16 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | 0.12" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 48 | 9610K17 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | 0.15" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K18 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | 0.23" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K19 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 0.3" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K21 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Self-Piercing Fabric Grommets
Save time installing grommets in tarps and covers without precut holes. Set grommets in a bench-mount manual press with die set, and the sharp neck of the grommet cuts the material as you press it into place. Installation tools are sold separately.
Standard Washer
![]() |
Grommets with trade size 0, 1, and 2 require a die set adapter for installation.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Tooth-Lock Washer
![]() |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.