No cords or software required—these data recorders store readings on an included SD card in Excel format for easy transfer to a PC.

About half the size of standard temperature data recorders, these are often used to monitor temperature inside refrigerators, incubators, storage compartments, and other small spaces. They have a built-in sensor, so no probe is needed.

To alert you of temperature fluctuations, these recorders sound an alarm and flash the display when temperature rises above or falls below the programmable temperature range. They have a thermocouple type-K probe on a 4-ft. cable for taking readings in hard-to-access areas.

Note: Thermocouple probes are not interchangeable with RTD probes.

Check temperature, atmospheric pressure, and altitude wherever you go with these palm-sized barometers.

Remotely record temperature, humidity, and dew point up to 10 feet from the display and set the alarm to sound and flash the display if temperature readings rise above or fall below a set range. This recorder has a remote probe on a 10-ft. cable and a display that can be set to show current temperature, minimum/maximum temperature, or relative humidity and calculated dew point.

Measure temperature, humidity, and radiant heat in your work area to keep your team safe from heat-related hazards. These monitors help you avoid dangerous conditions and comply with OSHA standards for a safe work environment. They use a variety of measurements from your surroundings to calculate the heat stress index and the wet bulb globe temperature (WBGT), which tell you how hot it feels. Set a maximum wet bulb globe temperature, and an alarm will go off when heat reaches the safety limit.

These monitors have two sensors. One measures temperature, humidity, dew point, and wet globe temperature. The other measures black globe temperature, which is the effect of direct solar radiation on an exposed surface. Carry monitors with you to measure different areas, or mount to your tripod to measure conditions over time.

Adapters—Power these monitors with the included batteries, or add a power adapter to plug them in.

Record measurements from electrical tests over time to identify intermittent issues such as voltage spikes and temporary power flow problems. Review data captured by these high-quality and durable Fluke multimeters in real-time or save it for future analysis.

Track ambient temperature and relative humidity over time with this recorder. Recorders come with a replaceable sensor, so no probe is needed.

Monitor temperature and pressure in hard-to-access system components with this data recorder that has remote sensors that track and store readings for upload to a PC.

Record temperature in hard-to-access areas. These recorders have a remote thermocouple type-J probe on a 15-ft. cable. They include 60 assorted charts with a variety of recording times and temperature ranges.

Note: Thermocouple probes are not interchangeable with RTD probes.

Measure and record pressure on a paper chart to troubleshoot system problems and track important process parameters. Recorders are rated NEMA 4X for protection from dirt, washdowns, and corrosion.

Also known as data loggers, these recorders track and store up to 64,000 data samples that you can upload to your computer using a USB connection or a flash drive. Recorders are rated IP68 for protection against water submersion. The LCD shows pressure for local readings.

Store up to 500 readings on these thermometers and determine temperature within ±0.75° F accuracy.