Thickness Thickness |
---|
|
|
|
Heat Treatment Heat Treatment |
---|
|
Hardness Hardness |
---|
|
Yield Strength Yield Strength |
---|
|
Certificate Certificate |
---|
![]() | Material Certificate with Traceable Lot Number |
More
1075 spring steel is easier to bend than 1095, but it has less bounce-back after heat treating. It is often used for springs and shims. This material is also known as scaleless blue steel.
Wd. | Lg., ft. | Heat Treatment | Color | Each | |
0.01" Thick. (-0.001" to 0.001" Tolerance) | |||||
---|---|---|---|---|---|
1/2" | 10 | Hardened | Blue | 0000000 | 000000 |
1" | 10 | Hardened | Blue | 0000000 | 00000 |
1" | 75 | Hardened | Blue | 00000000 | 00000 |
2" | 5 | Hardened | Blue | 0000000 | 00000 |
4" | 10 | Hardened | Blue | 00000000 | 00000 |
6" | 5 | Hardened | Blue | 0000000 | 00000 |
6" | 10 | Hardened | Blue | 00000000 | 00000 |
0.015" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 10 | Hardened | Blue | 0000000 | 00000 |
1" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 50 | Hardened | Blue | 00000000 | 00000 |
2" | 5 | Hardened | Blue | 0000000 | 00000 |
2" | 25 | Hardened | Blue | 00000000 | 00000 |
4" | 10 | Hardened | Blue | 00000000 | 00000 |
6" | 10 | Hardened | Blue | 00000000 | 00000 |
0.018" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 10 | Hardened | Blue | 0000000 | 00000 |
1" | 5 | Hardened | Blue | 0000000 | 00000 |
2" | 5 | Hardened | Blue | 0000000 | 00000 |
6" | 10 | Hardened | Blue | 00000000 | 00000 |
0.02" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 10 | Hardened | Blue | 0000000 | 00000 |
1/2" | 100 | Hardened | Blue | 00000000 | 00000 |
1" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 50 | Hardened | Blue | 00000000 | 00000 |
2" | 5 | Hardened | Blue | 0000000 | 00000 |
2" | 25 | Hardened | Blue | 00000000 | 00000 |
4" | 10 | Hardened | Blue | 00000000 | 00000 |
6" | 10 | Hardened | Blue | 00000000 | 00000 |
0.025" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 10 | Hardened | Blue | 0000000 | 00000 |
1/2" | 75 | Hardened | Blue | 00000000 | 00000 |
1" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 50 | Hardened | Blue | 00000000 | 00000 |
2" | 5 | Hardened | Blue | 0000000 | 00000 |
2" | 25 | Hardened | Blue | 00000000 | 00000 |
6" | 5 | Hardened | Blue | 00000000 | 00000 |
0.032" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 5 | Hardened | Blue | 0000000 | 00000 |
1/2" | 50 | Hardened | Blue | 00000000 | 00000 |
1" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 25 | Hardened | Blue | 00000000 | 00000 |
2" | 10 | Hardened | Blue | 00000000 | 00000 |
4" | 10 | Hardened | Blue | 00000000 | 00000 |
6" | 5 | Hardened | Blue | 00000000 | 00000 |
0.035" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 5 | Hardened | Blue | 0000000 | 00000 |
1/2" | 50 | Hardened | Blue | 00000000 | 00000 |
1" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 25 | Hardened | Blue | 00000000 | 00000 |
2" | 10 | Hardened | Blue | 00000000 | 00000 |
4" | 10 | Hardened | Blue | 00000000 | 00000 |
6" | 5 | Hardened | Blue | 00000000 | 00000 |
0.042" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 25 | Hardened | Blue | 00000000 | 00000 |
2" | 10 | Hardened | Blue | 00000000 | 00000 |
3" | 10 | Hardened | Blue | 00000000 | 00000 |
4" | 5 | Hardened | Blue | 00000000 | 00000 |
6" | 4 | Hardened | Blue | 00000000 | 00000 |
0.05" Thick. (-0.001" to 0.001" Tolerance) | |||||
1/2" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 5 | Hardened | Blue | 0000000 | 00000 |
1" | 25 | Hardened | Blue | 00000000 | 00000 |
2" | 10 | Hardened | Blue | 00000000 | 00000 |
3" | 5 | Hardened | Blue | 0000000 | 00000 |
4" | 5 | Hardened | Blue | 00000000 | 00000 |
6" | 4 | Hardened | Blue | 00000000 | 00000 |
0.062" Thick. (-0.002" to 0.002" Tolerance) | |||||
1/2" | 5 | Hardened | Blue | 0000000 | 00000 |
1/2" | 25 | Hardened | Blue | 00000000 | 00000 |
1" | 10 | Hardened | Blue | 00000000 | 00000 |
2" | 10 | Hardened | Blue | 00000000 | 00000 |
3" | 5 | Hardened | Blue | 0000000 | 00000 |
4" | 4 | Hardened | Blue | 00000000 | 00000 |
6" | 3 | Hardened | Blue | 00000000 | 00000 |
0.094" Thick. (-0.002" to 0.002" Tolerance) | |||||
1/2" | 5 | Hardened | Blue | 0000000 | 00000 |
1/2" | 100 | Hardened | Blue | 00000000 | 000000 |
5/8" | 5 | Hardened | Blue | 0000000 | 00000 |
3/4" | 5 | Hardened | Blue | 00000000 | 00000 |
1" | 4 | Hardened | Blue | 00000000 | 00000 |
1 1/4" | 3 | Hardened | Blue | 00000000 | 00000 |
1 1/2" | 3 | Hardened | Blue | 00000000 | 00000 |
1 1/2" | 50 | Hardened | Blue | 00000000 | 000000 |
2" | 2 | Hardened | Blue | 00000000 | 00000 |
2" | 25 | Hardened | Blue | 00000000 | 000000 |
2 1/2" | 2 | Hardened | Blue | 00000000 | 00000 |
2 1/2" | 25 | Hardened | Blue | 00000000 | 000000 |
3" | 1 | Hardened | Blue | 00000000 | 00000 |
3" | 25 | Hardened | Blue | 00000000 | 000000 |
4" | 1 | Hardened | Blue | 00000000 | 00000 |
4" | 10 | Hardened | Blue | 00000000 | 000000 |
5" | 1 | Hardened | Blue | 00000000 | 00000 |
5" | 10 | Hardened | Blue | 00000000 | 000000 |
1/8" Thick. (-0.002" to 0.002" Tolerance) | |||||
1/2" | 5 | Hardened | Blue | 00000000 | 00000 |
3/4" | 4 | Hardened | Blue | 00000000 | 00000 |
7/8" | 3 | Hardened | Blue | 00000000 | 00000 |
1" | 3 | Hardened | Blue | 00000000 | 00000 |
1 1/4" | 2 | Hardened | Blue | 00000000 | 00000 |
1 1/2" | 2 | Hardened | Blue | 00000000 | 00000 |
These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties. 1075 spring steel is easier to bend than 1095, but it has less bounce-back after heat treating. It is often used for springs and shims.
For technical drawings and 3-D models, click on a part number.
Thick. | Thick. Tolerance | Heat Treatment | Flatness Tolerance | Each | |
8" × 12" | |||||
---|---|---|---|---|---|
0.025" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
0.032" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.035" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.042" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.05" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.062" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.072" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.083" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.094" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.109" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
1/8" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.187" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
8" × 24" | |||||
0.025" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.032" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.035" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.042" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.05" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.062" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.072" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.083" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.094" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.109" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
1/8" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.187" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
15" × 48" | |||||
0.025" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.032" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.035" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.042" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.05" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.062" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.072" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.083" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.094" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
0.109" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
1/8" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
0.187" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
Each sheet comes with a traceable lot number and test report. They have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties. 1075 spring steel is easier to bend than 1095, but it has less bounce-back after heat treating. It is often used for springs and shims.
Thick. | Thick. Tolerance | Heat Treatment | Flatness Tolerance | Each | |
8" × 12" | |||||
---|---|---|---|---|---|
0.025" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
0.032" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.035" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.042" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.05" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.062" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.072" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.083" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.094" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.109" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
1/8" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.187" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
8" × 24" | |||||
0.025" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.032" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.035" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.042" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.05" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.062" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.072" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.083" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.094" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.109" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
1/8" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.187" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
15" × 48" | |||||
0.025" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.032" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.035" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.042" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.05" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.062" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.072" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 00000 |
0.083" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
0.094" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
0.109" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
1/8" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |
0.187" | -0.003" to 0.003" | Annealed (Softened) | 3/8" | 0000000 | 000000 |