No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use these hinges on doors with or without a door closer. All have concealed bearings to open and close doors smoothly. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.

Chrome-, brass-, and bronze-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.

304 stainless steel hinges are more corrosion resistant than chrome-, brass-, and bronze-plated low-carbon steel. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use this hinge on doors with or without a door closer. It has concealed bearings to open and close doors smoothly. Also known as a hospital-tip hinge, the top and bottom of the hinge pin are cut on an angle. The pin is nonremovable to provide additional tamper resistance. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.

For technical drawings and 3-D models, click on a part number.

Only one cutout (mortise) is needed to mount these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf. These hinges are often used when it is difficult to mortise the frame, such as when hanging a hollow door on a solid frame. All hinges have mounting holes that form an industry-standard half-moon shape. Use them on doors without a door closer.

Chrome-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.

For technical drawings and 3-D models, click on a part number.

Bearings allow these hinges to open and close doors smoothly. Only one cutout (mortise) is needed to mount them—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf. These hinges are often used when it is difficult to mortise the frame, such as when hanging a hollow door on a solid frame. All hinges have mounting holes that form an industry-standard half-moon shape. Use them on doors with or without a door closer.

Chrome-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.

For technical drawings and 3-D models, click on a part number.

The mounting holes on these hinges form an industry-standard half-moon shape. Springs in the hinges automatically swing doors and gates closed behind you. To adjust the closing tension, use the included tension adjustment tool. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. For hinges with a capacity of 90, 110, and 150 lbs., capacity is based on three hinges per door with a maximum door size of 7' Ht. × 3' Wd. For hinges with a capacity of 155 lbs., capacity is based on three hinges per door with a maximum door size of 7' Ht. × 4' Wd.

Zinc-, chrome-, and brass-plated low-carbon steel hinges have better corrosion resistance than primed and painted low-carbon steel.

304 stainless steel hinges are more corrosion resistant than zinc-, chrome-, and brass-plated low-carbon steel. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. These hinges have mounting holes that form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Capacity is based on three hinges per door with a maximum door size of 7' Ht. × 3' Wd. × 1 3/4" Thick. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.

Chrome-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.

304 stainless steel hinges are more corrosion resistant than chrome-plated low-carbon steel. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.