Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of screw sizes.

A plastic cover on the barrel provides electrical insulation. These terminals can withstand temperatures up to 300°F.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Thicker than standard ring terminals, these are more durable.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

A plastic cover on the barrel provides electrical insulation.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

Heat these terminals to shrink the insulation, creating a seal that keeps out water, salt, and contaminants.

A plastic cover on the barrel provides electrical insulation.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

Slide these lugs onto cable and strike them with your hammer to create a durable connection.

These splices can withstand higher temperatures than insulated splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Filled with grease, these splices resist moisture and corrosion.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

Create a water- and corrosion-resistant seal while connecting two different sizes of wire.

Connect wire without stripping—these splices pierce insulation.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Use a single splice to connect more than two wires.

Tap a main wire or add a finished terminal to the end of a wire.

Keep a variety of ring terminal sizes on hand.