Base Type Base Type |
---|
|
For Mounting Stem Diameter For Mounting Stem Diameter |
---|
|
|
Arm Length Arm Length |
---|
|
|
|
Base Length Base Length |
---|
|
|
|
Base Magnetic Pull Base Magnetic Pull |
---|
|
|
Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups. Holders have fine-adjustment knobs for precise positioning.
Indicator Holders | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Arm | Replacement Arms | Replacement Clamps | ||||||||||||||
For Mounting Stem Dia. | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Lg. | Dia. | Features | Includes | Each | Each | Each | |||
Dovetail and Stem Mount | |||||||||||||||||
3/8" | 1 1/2" | 1 1/4" | 1 3/8" | M5 | 0.8 | Cast Iron | 70 | 4 1/4" | 3/8" | Fine-Adjustment Base, Fine-Adjustment Clamp, Magnetic-Release Switch | Swivel Clamp | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
3/8" | 2 3/8" | 1 15/16" | 2 5/32" | M8 | 1.25 | Cast Iron | 176 | 11" | 1/2" | Fine-Adjustment Base, Fine-Adjustment Clamp, Magnetic-Release Switch | Swivel Clamp | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
3/8" | 4 3/4" | 1 15/16" | 2 5/32" | M10 | 1.25 | Cast Iron | 290 | 20" | 3/4" | Fine-Adjustment Clamp, Magnetic-Release Switch | Swivel Clamp | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups. Use the fine adjustment knob on the clamp for precise positioning.
Base | Arm | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Lg. | Dia. | Features | Each | |
Dovetail and Stem Mount | ||||||||||||
3/8" | 2 1/2" | 2" | 2 3/16" | M8 | 1.25 | Cast Iron | 132 | 13 1/2" | 0.464" | Fine-Adjustment Clamp, Magnetic-Release Switch | 000000 | 000000 |
The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the arm.
Base | Upright Post | Arm | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | For Mounting Stem Dia. | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Dia. | Ht. | Material | Lg. | Dia. | Features | Each | |
Lug and Stem Mount | ||||||||||||||||
1/4" | 3/8" | 2 5/8" | 2" | 2 15/16" | M8 | 1.25 | Cast Iron | 132 | 7/16" | 6.9" | Steel | 5 13/16" | 0.464" | Fine-Adjustment Arm, Magnetic-Release Switch | 0000000 | 000000 |
Install this attachment onto Starrett magnetic-base holders for more precise control over positioning.
For Arm Dia. | Material | Manufacturer Model Number | Each | |
0.5" | Steel | 657W | 00000000 | 000000 |
The magnetic base has a flat bottom for mounting on flat metal surfaces and a magnetic release switch for easy setups.
Fine-adjustment attachment (sold separately) can be installed between the upright post and the base to give you more precise control over positioning.
Base | Upright Post | Arm | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | For Mounting Stem Dia. | Lg. | Wd. | Ht. | Thread Size | Material | Magnetic Pull, lbs. | Dia. | Ht. | Lg. | Dia. | Features | Manufacturer Model Number | Each | |
Lug and Stem Mount | |||||||||||||||
1/4" | 1/4" | 1 57/64" | 1 5/8" | 1 29/32" | 1/4"-20 | Steel | 75 | 3/8" | 7 5/16" | 6" | 0.25" | Magnetic-Release Switch | 657AA | 00000000 | 0000000 |
Fine Adjustment Attachment | 00000000 | Each | 000000 |
The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups.
Holders with fine-adjustment arm give you more precise control over the arm position.
Base | Upright Post | Arm | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | For Mounting Stem Dia. | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Dia. | Ht. | Material | Lg. | Dia. | Features | Each | |
Lug and Stem Mount | ||||||||||||||||
1/4" | 5/32"-1/4" | 2.55" | 1.97" | 2.16" | M8 | 1.25 | Cast Iron | 176 | 7/16" | 6 7/8" | Steel | 6 1/2" | 0.375" | Fine-Adjustment Arm, Magnetic-Release Switch | 0000000 | 000000 |
1/4" | 5/32"-1/4" | 2.55" | 1.97" | 2.16" | M8 | 1.25 | Cast Iron | 176 | 7/16" | 6 7/8" | Steel | 6 1/2" | 0.375" | Magnetic-Release Switch | 000000 | 00000 |
1/4" | 1/4"-5/16" | 3" | 1.97" | 2.188" | M8 | 1.25 | Cast Iron | 220 | 5/8" | 8 7/8" | Steel | 6 1/2" | 0.563" | Fine-Adjustment Arm, Magnetic-Release Switch | 0000000 | 00000 |
Adjust the flexible arm to nearly any position. These holders have a ball-and-socket segmented arm that locks in place with a lever. The magnetic base has a release switch for easy setups.
Holders with V-grooved base can be mounted on both curved and flat surfaces.
Holders with fine-adjustment base or clamp give you more precise control over positioning.
Indicator Holders | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Arm | Replacement Arms | |||||||||||||
For Mounting Stem Dia. | Type | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Lg. | Dia. | Features | Each | Each | ||
Dovetail and Stem Mount | |||||||||||||||
3/8" | V-Grooved | 2" | 2 1/2" | 2 5/8" | 5/16''-18 | __ | Steel | 90 | 15 1/4" | 0.625" | Fine-Adjustment Clamp, Magnetic-Release Switch | 00000000 | 0000000 | 00000000 | 000000 |
Stem Mount | |||||||||||||||
1/8"-1/2" | Flat | 2" | 1 5/8" | 2" | __ | __ | Steel | 65 | 14" | 0.625" | Fine-Adjustment Base, Magnetic-Release Switch | 00000000 | 000000 | 00000000 | 00000 |
5/32"-1/2" | V-Grooved | 2 1/2" | 2" | 2 1/4" | M8 | 1.25 | Steel | 180 | 12 1/2" | 0.63" | Magnetic-Release Switch | 0000000 | 00000 | 0000000 | 00000 |
For more versatility than other low-profile holders, this holder has six locations for mounting indicators and accessories, including two mounting holes and four places to mount an indicator lug back with the included thumb screws. Use it in areas with limited space. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces.
For Stem Dia. Mounting Hole | Base | |||||||
---|---|---|---|---|---|---|---|---|
Unthreaded Round | Unthreaded V-Shape | Type | Ht. | Material | Magnetic Pull, lbs. | Mount Type | Each | |
3/8" | 1/8"-5/16" | Flat | 1 1/16" | Zinc | 45 | Stem | 00000000 | 000000 |
Use a swivel clamp (not included) to attach an indicator to the positioning arm. These holders are often used in areas with limited space. They have a magnetic base with a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups.
Style A has a fine-adjustment knob on the arm for precise positioning.
Style B has a pivoting arm attached to an adjustable sliding block. Use the fine-adjustment knob on the sliding block for precise positioning. The arm can be removed to hold a 1/4” lug back.
Base | Arm | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Type | Lg. | Wd. | Ht. | Material | Magnetic Pull, lbs. | Dia. | Flexibility | Lg. | Material | Features | Each | |
A | V-Grooved | 3 1/2" | 1 1/8" | 1" | Stainless Steel | 50 | 0.25" | Rigid | 6" | Steel | Fine-Adjustment Arm, Magnetic-Release Switch | 000000 | 000000 |
B | V-Grooved | 3 1/2" | 1 1/8" | 1 1/2" | Stainless Steel | 50 | 0.25" | Rigid | 6" | Steel | Fine-Adjustment Arm, Magnetic-Release Switch | 000000 | 00000 |
Use this holder in areas with limited space. It has a nut and bolt for holding a 1/4” lug-back indicator. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups.
Base | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | Lg. | Wd. | Ht. | Material | Magnetic Pull, lbs. | Thread Size | Features | Each | |
Lug Mount | |||||||||
1/4" | 3 1/2" | 1 1/8" | 1" | Steel | 50 | 8-32 | Magnetic-Release Switch | 000000 | 000000 |
The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces. Use the fine-adjustment knob to precisely position the arm.
Base | Upright Post | Arm | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | For Mounting Stem Dia. | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Dia. | Ht. | Material | Lg. | Dia. | Material | Features | Each | |
Lug and Stem Mount | |||||||||||||||||
1/4" | 5/32"-3/8" | 1 15/16" | 1 5/8" | 2 7/8" | M8 | 1.25 | Cast Aluminum | 120 | 15/32" | 7 1/16" | Steel | 3 1/2" | 0.469" | Steel | Fine-Adjustment Arm, Magnetic-Release Switch | 0000000 | 0000000 |
A flexible ball-and-socket segmented arm adjusts to nearly any position and locks in place with a lever. The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces. It has a magnetic-release switch for easy setups.
Base | Arm | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Lg. | Dia. | Material | Features | Each | |
Stem Mount | |||||||||||||
5/64"-1/2" | 1 15/16" | 1 5/8" | 2 7/8" | M8 | 1.25 | Cast Aluminum | 120 | 12 1/2" | 0.47" | Steel | Magnetic-Release Switch | 0000000 | 0000000 |
The threaded mounting holes on this base hold upright posts and fixtures. It has a flat bottom for mounting on flat metal surfaces and a V-step at the top of the base for mounting on round surfaces. The magnetic-release switch allows for easy setups.
This magnetic base has a threaded mounting hole to hold upright posts and fixtures. It has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups.
Use the threaded mounting hole on these bases to hold upright posts and fixtures. Bases have a magnetic-release switch for easy setups.
V-grooved bases can be mounted on both curved and flat metal surfaces.
Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Magnetic Pull, lbs. | Mounting Hole Location | Features | Each | |
Flat | ||||||||||
1 3/16" | 1 3/16" | 1 3/16" | M5 | 0.8 | Cast Iron | 38 | Top | Magnetic-Release Switch | 0000000 | 000000 |
4 3/4" | 2 3/8" | 2 1/16" | M8 | 1.25 | Cast Iron | 337 | Top | Magnetic-Release Switch | 000000 | 000000 |
V-Grooved | ||||||||||
2 5/8" | 2" | 2 3/16" | M8 | 1.25 | Cast Iron | 176 | Top | Magnetic-Release Switch | 000000 | 00000 |
3" | 2" | 2 3/16" | M8 | 1.25 | Cast Iron | 220 | Top | Magnetic-Release Switch | 0000000 | 00000 |
4 5/8" | 2" | 2 3/16" | M10 | 1.5 | Cast Iron | 292 | Top | Magnetic-Release Switch | 0000000 | 000000 |
Commonly used on workbenches, these stands have a heavy granite base for stability. They hold indicators in place for taking accurate readings.
Holder with fine-adjustment arm gives you more control over positioning.
Base | Upright Post | Arm | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | Surface Accuracy | Throat Dp. | Type | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Dia. | Ht. | Material | Lg. | Flexibility | Features | Each | |
1/4" | ±0.0001" | 2 3/8" | Flat | 6" | 6" | 2" | 3/8"-16 | __ | Granite | 1 1/4" | 8" | Steel | 2 1/8" | Rigid | __ | 00000000 | 0000000 |
1/4" | ±0.0005" | 2 3/8" | Flat | 6" | 6" | 2" | M10 | 1.5 | Granite | 1" | 8" | Steel | 1 7/8" | Rigid | Fine-Adjustment Arm | 00000000 | 000000 |
These holders come with a calibration certificate traceable to NIST states that the granite base has passed a test for surface accuracy. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.
Holders with jointed arm have a fine-adjustment knob for precise positioning.
Base | Upright Post | Arm | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Surface Accuracy | Throat Dp. | Lg. | Wd. | Ht. | Thread Size | Material | Dia. | Ht. | Material | Lg. | Flexibility | Features | Each | |
3/8" | ±0.00005" | 1 3/4" | 6" | 6" | 2" | 1/2"-13 | Granite | 1 1/4" | 8" | Steel | 4 1/8" | Rigid | __ | 0000000 | 0000000 |
3/8" | ±0.0001" | 5" | 8" | 12" | 2" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
3/8" | ±0.0001" | 5" | 12" | 18" | 4" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
Base | Upright Post | Arm | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | Surface Accuracy | Throat Dp. | Lg. | Wd. | Ht. | Thread Size | Material | Dia. | Ht. | Material | Lg. | Flexibility | Features | Each | |
1/4" | ±0.00005" | 1 3/4" | 6" | 6" | 2" | 1/2"-13 | Granite | 1 1/4" | 8" | Steel | 4 1/8" | Rigid | __ | 0000000 | 0000000 |
1/4" | ±0.0001" | 5" | 8" | 12" | 2" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
1/4" | ±0.0001" | 5" | 12" | 18" | 4" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
Adjust the flexible ball-and-socket segmented arm to nearly any position and lock in place with a lever. A heavy cast iron base adds stability.
Base | Arm | |||||||
---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Dia. | Ht. | Thread Size | Material | Lg. | Dia. | Each | |
Stem Mount | ||||||||
1/8"-1/2" | 6" | 15/16" | 5/16''-18 | Cast Iron | 13" | 0.625" | 0000000 | 000000 |
Position the arm by adjusting joints at the top, middle, and bottom. A vacuum base provides stability on granite plates and other nonmagnetic surfaces. Use the fine-adjustment knob on the clamp for precise positioning
Base | Arm | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Dia. | Ht. | Thread Size | Thread Pitch, mm | Material | Lg. | Dia. | Features | Each | |
Dovetail and Stem Mount | ||||||||||
3/8" | 3 7/16" | 13/16" | M8 | 1.25 | Cast Aluminum | 11 1/8" | 0.701" | Fine-Adjustment Clamp | 0000000 | 0000000 |
Position the flexible ball-and-socket segmented arm around obstructions and lock in place with a lever. The vacuum base provides stability on granite plates and other nonmagnetic surfaces.
Base | Arm | ||||||||
---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Dia. | Ht. | Thread Size | Thread Pitch, mm | Material | Lg. | Dia. | Each | |
Stem Mount | |||||||||
1/8"-1/2" | 3.465" | 1.063" | M8 | 1.25 | Aluminum | 13" | 0.625" | 0000000 | 0000000 |
Mount this holder into your machine spindle and use for centering workpieces. The clamp has a fine-adjustment knob for precise positioning.
Arm | Shank | |||||||
---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Lg. | Dia. | Lg. | Dia. | Material | Features | Each | |
Dovetail and Stem Mount | ||||||||
3/8" | 7 " | 3/8 " | 1 9/16" | 5/16" | Steel | Fine-Adjustment Clamp | 0000000 | 000000 |
Attach the C-clamp on this holder to your Bridgeport J head to take indicator measurements without obstructing the cutting tool. Use the fine-adjustment rod to precisely position the arm.
Overall reach is the distance from the center of the C-clamp to the end of the arm when both are extended.
Attach the C-clamp on these holders to your milling machine head to take indicator measurements without obstructing the cutting tool. Use the fine-adjustment rod to precisely position the arm.
Overall reach is the distance from the center of the C-clamp to the end of the arm when both are extended.
Vise-grip locking pliers clamp this holder to most thin, flat surfaces, and the flexible arm lets you position your indicator around obstructions. Lock the arm in place with a lever.
A granite base stabilizes these indicators. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.
Indicators have a continuous dial numbered clockwise around the face for taking direct measurements. Rotate the dial face for viewing at multiple angles. All come with calibration certificates traceable to NIST that state the indicator and the granite base have passed a test for accuracy. They have jeweled bearings that are highly sensitive and wear resistant for a long service life.
Holders with jointed arm have a fine-adjustment knob for precise positioning of the indicator.
Dial | Contact Point | Upright Post | Arm | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Measuring Increments | Accuracy | Industry Designation | Indicator Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Dia. | Ht. | Lg. | Flexibility | Throat Dp. | Granite Base Flatness Tolerance | Each | |
0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | __ | 2 1/4" | 0-100 | 3/16" | 1/4" | 4-48 | 1 1/4" | 8" | 4" | Rigid | 1 3/4" | ±0.00005" | 0000000 | 0000000 |
0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | __ | 2 1/4" | 0-100 | 3/16" | 1/4" | 4-48 | 1 1/4" | 12" | 7 5/16" | Jointed | 5" | ±0.0001" | 0000000 | 000000 |
0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/16" | 1/4" | 4-48 | 1 1/4" | 8" | 4 1/8" | Rigid | 1 3/4" | ±0.00005" | 0000000 | 000000 |
0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 3/16" | 1/4" | 4-48 | 1 1/4" | 12" | 7 5/16" | Jointed | 5" | ±0.0001" | 0000000 | 000000 |
Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob on the holder’s clamp for precise positioning of the indicator.
Also known as a test indicator, the indicator has a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. It has jeweled bearings for high sensitivity, wear resistance, and a long service life. Rotate the dial face for viewing at multiple angles.
Dial | Contact Point | Base | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Measuring Increments | Accuracy | Reading | Dia. | Head Dia. | Lg. | Swivel Angle | Lg. | Wd. | Magnetic Pull, lbs. | Includes | Each | |
Horizontal Orientation | |||||||||||||
0"-0.03" | 0.0005" | ±0.0004" | 0-15-0 | 1 9/32" | 0.078" | 1/2" | 180° | 2 1/2" | 2" | 132 | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 000000 |
Place the magnetic base on metal surfaces for a solid mount. It has a V-grooved bottom for mounting on flat and curved surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.
Also known as a test indicator, the indicator has a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. It has jeweled bearings for high sensitivity, wear resistance, and a long service life. Rotate the dial face for viewing at multiple angles.
Dial | Contact Point | Base | Upright Post | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Measuring Increments | Accuracy | Reading | Dia. | Head Dia. | Lg. | Swivel Angle | Lg. | Wd. | Magnetic Pull, lbs. | Dia. | Ht. | Includes | Each | |
Horizontal Orientation | |||||||||||||||
0"-0.03" | 0.0005" | ±0.0004" | 0-15-0 | 1 9/32" | 0.078" | 1/2" | 180° | 2 1/2" | 2" | 132 | 7/16" | 6.9" | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 000000 |
Two chain clamps position two Starrett test indicators at different points along a shaft to find any misalignment. The easy-to-read dials offer more precise measurement than stylus indicators.
Dial Indicator | |||||||
---|---|---|---|---|---|---|---|
For Shaft Dia. | Manufacturer Model Number | Measuring Increments | Measuring Range | Container Type | Includes | Each | |
0"-9" | 196B1 | 0.001" | 0"-0.2" | Case | Dial Indicator, Inspection Mirror, Two Swivel Clamps | 0000000 | 000000000 |
Install a test indicator on each holding rod to check for shaft misalignment.
Body | Mounting | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Chain Lg. | Lg. | Wd. | Body Material | Hole Location | Fasteners Included | No. of Holes | Hole Thread Size | Includes | Each | |
1"-6" | 24" | 3 5/8" | 3/4" | Stainless Steel | Side | Yes | 3 | 1/4"-28 | ANSI No. 41 Chain (6" Dia. Capacity) One 5/16" Dia. x 3-1/4" Lg. Stainless Steel Holding Rod One 5/16" Dia. x 6-1/2” Lg. Stainless Steel Holding Rod | 00000000 | 0000000 |
0"-9" | 24" | 3" | 3" | Aluminum | __ | __ | __ | __ | ANSI No. 41 Chain (9” Dia. Capacity) One 5/16” Dia. x 3” Lg. Stainless Steel Holding Rod One 5/16” Dia. x 6” Lg. Stainless Steel Holding Rod | 0000000 | 000000 |
Kit includes two chain clamps, an inspection mirror, and a case. Pair this kit with your own test indicators to check for shaft misalignment.
For Shaft Dia. | Container Type | Includes | Each | |
0"-9" | Case | Inspection Mirror, Two Chain Clamps | 0000000 | 0000000 |