Secure a ball with shank to a flat surface.

A thimble on the inside of the loop protects the wire rope from fraying.

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

Create a choker loop around a supporting structure with the snap-hook end and use the loop to secure the suspended material.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20664 and MS 20668.

These links allow you to mount chain with a screw, bolt, or rivet.

Use these links to connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

Also known as ball chain, use this chain to keep tools with machines, keys with chucks, and gas and dust caps with tanks.

The chain has flat links that fold back on themselves for maximum flexibility. Use the split ring on one end to hold tags and keys.

Small, twisted links make this chain the most resistant to tangling and knotting.

Not only is this chain made of hardened steel for cut resistance, it has a nylon sleeve to protect against abrasion.

Lightweight and flexible, use this chain in applications such as hanging signs and fixtures.

A lighter and more flexible alternative to wire rope lanyards.

Attach to your hard hat to prevent accidental drops.

Add attachment points to your tools. Slide the ring on and secure it in place with included rubber collar. It rotates so you can turn your tool freely.

Made of steel, these durable lanyards hold up in abrasive and high-heat applications.

A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches.

Harnesses have a D-ring that attaches to a lanyard.

With D-rings on the shoulders, these harnesses allow you to raise and lower workers.

These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position.

D-rings on the hip provide a stable working position and keep workers away from areas of potential free fall when attached to a lanyard.

Let go of your tool and the cable pulls it back up.

Drill through the stem to mount.

Secure to a square arbor.

Cable tension is controlled by an air regulator for precise, constant tool positioning.

These lanyards keep name badges out of the way when not in use.

Hold name badges, keys, and other items by the wrist.

Clearly identify staff and visitors in sanitary areas with these name badge sleeves—they have a metal additive that will set off metal detectors if they fall into your food line.

With a magnetic clip strong enough to hold onto blazers, these badges stay in place without snagging or wrinkling clothing.

Cinch the lanyard to keep your name badge comfortably in place.

Choose these holders if you need holders that each open with a different key.

These holders come in a variety of colors for easy key identification.

Use these strong and flexible locks to secure tools, gates, and irregularly shaped objects.

Often used to secure computer equipment, this cable lock has a lock at both ends to secure two pieces of equipment. Choose these locks if you need locks that each open with the same key.

This lock has a cinching collar that allows you to tighten and loosen the cable around equipment.

After locking, pull the cable tight for a secure fit.

Secure a single breaker switch with multiple padlocks, so electricity stays safely off until everyone's done working.

Sets include a variety of electrical and valve lockouts as well as padlocks.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

Use these dust caps and plugs to keep contaminants out of your hose line.

Thread these caps and plugs onto fire hydrants and washdown equipment to close off the line. They have rocker lugs for easy gripping.

The extra height and smaller width of the grip make the button more accessible in tight spaces. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

The shaft on these pins retracts into the head to hold thin sheets of material together. Pins lock in place until you push the button to release the spring-loaded retaining balls.

A T-handle makes these pins easy to grip. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle.

Made of dark blue, FDA-compliant rubber with metal additives, these eyeglass holders are designed to sanitary standards.

Designed for use in the food industry and other applications where detection and retrieval are essential, these clips are made of metal-detector-grade plastic. Wear on a belt loop to keep your gloves close at hand.

Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.