Overall Thickness Overall Thickness |
|---|
Opening Width Opening Width |
|---|
|
|
|
Opening Length Opening Length |
|---|
Strand Thickness Strand Thickness |
|---|
|
|
|
Panel Construction Panel Construction |
|---|
|
Strand Width Strand Width |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Metal Panels
Close off openings in structures while allowing air to pass through.
For technical drawings and 3-D models, click on a part number.
Expanded Panels—Raised
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Raised panels have strands that overlap to provide a skid-resistant surface. Use them to create safety guards for equipment and machinery.
Steel is lightly oiled.
Opening | Strand | 12" × 12" | 24" × 24" | 48" × 48" | 48" × 96" | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | Each | Each | Each | ||||
Carbon Steel | ||||||||||||
| 0.02" | 0.1" | 0.06" | 0.016" | 0.015" | 00000000 | 000000 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 |
| 0.04" | 0.2" | 0.07" | 0.03" | 0.02" | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 0.065" | 0.26" | 0.1" | 0.05" | 0.025" | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 0.146" | 0.72" | 0.16" | 0.072" | 0.036" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 000000 | 0000000 | 0000000 |
| 0.151" | 0.72" | 0.15" | 0.072" | 0.048" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.18" | 0.94" | 0.38" | 0.088" | 0.048" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.183" | 2.06" | 0.87" | 0.087" | 0.06" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.208" | 1.75" | 0.78" | 0.101" | 0.06" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.212" | 0.94" | 0.34" | 0.096" | 0.09" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.212" | 1.69" | 0.76" | 0.096" | 0.09" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.221" | 2.63" | 1.18" | 0.108" | 0.06" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.228" | 2.5" | 1.16" | 0.105" | 0.09" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.288" | 2.5" | 1.13" | 0.138" | 0.09" | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 000000 |
| 0.3" | 1.63" | 0.72" | 0.144" | 0.092" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.318" | 2.38" | 1.09" | 0.144" | 0.134" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.327" | 3.38" | 1.6" | 0.149" | 0.134" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.329" | 1.56" | 0.68" | 0.15" | 0.134" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
Expanded Panels—Flattened
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Flattened panels begin as raised panels, then they're rolled to a smooth and flat finish. Use them to create protective enclosures, shelving, grilles, and baskets.
Steel is lightly oiled.
Galvanized steel has good corrosion resistance in wet environments and can be used outdoors.
Opening | Strand | 12" × 12" | 24" × 24" | 48" × 48" | 48" × 96" | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | Each | Each | Each | ||||
Carbon Steel | ||||||||||||
| 0.015" | 0.06" | 0.1" | 0.016" | 0.015" | 00000000 | 000000 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 |
| 0.02" | 0.2" | 0.06" | 0.03" | 0.02" | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 0.025" | 0.25" | 0.1" | 0.05" | 0.025" | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 0.029" | 0.72" | 0.09" | 0.079" | 0.029" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 0000000 | 0000000 | 0000000 |
| 0.038" | 0.72" | 0.09" | 0.08" | 0.038" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.038" | 1" | 0.31" | 0.097" | 0.038" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.048" | 1.75" | 0.7" | 0.111" | 0.048" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.048" | 2.25" | 0.8" | 0.098" | 0.048" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.048" | 2.75" | 1.09" | 0.119" | 0.048" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.06" | 1.76" | 0.71" | 0.105" | 0.06" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.072" | 1.78" | 0.71" | 0.106" | 0.072" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.072" | 2.75" | 1.1" | 0.116" | 0.072" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.108" | 2.56" | 1.01" | 0.158" | 0.108" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
Galvanized Carbon Steel | ||||||||||||
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
Perforated Panels
Circle
Diamond
Square
Weave
Perforated panels are for use in decorative applications. They can be cut, formed, and welded.
Steel is lightly oiled.
Overall | Opening | 36" × 40" | 36" × 60" | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Opening Pattern | Thick. | Wd. Tolerance | Lg. Tolerance | Wd. | Lg. | Open Area | Each | Each | ||
Carbon Steel | ||||||||||
| Circle | 0.031" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 0000000 | 0000000 | 0000000 |
| Diamond | 0.038" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 | 0000000 | 000000 |
| Square | 0.038" | -1/8" to +1/8" | -1/8" to +1/8" | 0.5" | 0.5" | 53% | 0000000 | 00000 | 0000000 | 000000 |
| Square | 0.063" | -1/8" to +1/8" | -1/8" to +1/8" | 0.5" | 0.5" | 53% | 0000000 | 000000 | 0000000 | 000000 |
| Square | 0.063" | -1/8" to +1/8" | -1/8" to +1/8" | 0.75" | 0.75" | 56% | 0000000 | 000000 | 0000000 | 000000 |
| Weave | 0.025" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 00000 | 0000000 | 000000 |