Container Type Container Type |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Container Size Container Size |
|---|
|
|
|
Material Material |
|---|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
For Use On For Use On |
|---|
Additive Additive |
|---|
|
|
Electrical Properties Electrical Properties |
|---|
|
Lubricant Type Lubricant Type |
|---|
|
Specifications Met Specifications Met |
|---|
|
Manufacturer Manufacturer |
|---|
|
Trade Name Trade Name |
|---|
|
Compatible With Compatible With |
|---|
|
|
Electrical Resistivity Electrical Resistivity |
|---|
|
Dielectric Strength Dielectric Strength |
|---|
|
|
Melting Temperature Melting Temperature |
|---|
|
|
Hardness Hardness |
|---|
|
Consistency Consistency |
|---|
|
About Lubricants
More
About Grease
More
About Paint and Protective Coatings
More
Heat Sink Compounds
Bond heat sinks to surfaces, eliminating air gaps for maximum heat transfer. These compounds are commonly used with transistors, diodes, rectifiers, and transformers.
Zinc oxide compounds create a more secure bond than silicone compounds.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Thermal Conductivity | Temp. Range, °F | Type | Size | Manufacturer | Manufacturer Model Number | Specifications Met | Each | |
Silicone | ||||||||
| 0.68 W/m-K @ 97° F | -40° to 390° | Tube | 5 oz. | Dow Corning | 340 | __ | 00000000 | 000000 |
| 0.75 W/m-K @ 97° F | -40° to 400° | Tube | 8 oz. | __ | __ | __ | 00000000 | 00000 |
| 0.75 W/m-K @ 97° F | -40° to 400° | Pail | 80 lbs. | __ | __ | __ | 000000000 | 00000000 |
Zinc Oxide | ||||||||
| 0.92 W/m-K @ 97° F | -40° to 320° | Tube | 2 oz. | __ | __ | MIL-C-47113B | 0000000 | 00000 |
| 0.92 W/m-K @ 97° F | -40° to 320° | Syringe | 1 oz. | __ | __ | MIL-C-47113B | 00000000 | 00000 |
| 0.92 W/m-K @ 97° F | -40° to 390° | Tube | 4 oz. | __ | __ | ASTM D5470 | 00000000 | 00000 |
| 0.92 W/m-K @ 97° F | -40° to 390° | Jar | 16 oz. | __ | __ | ASTM D5470 | 00000000 | 00000 |
| 5 W/m-K @ 97° F | -40° to 500° | Tube | 2 oz. | __ | __ | __ | 00000000 | 00000 |
| 5 W/m-K @ 97° F | -40° to 500° | Tube | 4 oz. | __ | __ | __ | 00000000 | 00000 |
| 5 W/m-K @ 97° F | -40° to 500° | Jar | 16 oz. | __ | __ | __ | 00000000 | 000000 |
| 5 W/m-K @ 97° F | -40° to 500° | Syringe | 1 oz. | __ | __ | __ | 00000000 | 00000 |
Non-Bonding Heat Transfer Compounds
Also known as thermal paste, these boron-nitride compounds increase heat transfer between parts while preventing them from sticking. Unlike antiseize compounds, they don't conduct electricity, so you won't risk shorting out sensitive electronics. They're often used on thermocouple probes to improve accuracy. You can also use them in 3D printer heating blocks and other high-temperature areas to keep parts from fusing together.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Chemical | Max. Temp., °F | Thermal Conductivity | Color | Includes | For Use On | Compatible With | Each | |
| 0.2 | Syringe | Boron Nitride | 1830° | 31.4 W/m-K @ 212° F | White | Three Applicator Brushes | 3D Printer Extruder Heating Elements, Electrical Components | Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Electrically and Thermally Conductive Grease
A high silver content gives this grease excellent conductivity for applications where electricity and heat transfer are required. It is suitable for ESD (electrostatic discharge) and EMI (electromagnetic interference) shielding applications.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Electrical Resistivity, ohms-cm | Thermal Conductivity | Color | Each | |
Silicone Thickener | |||||||||||
| Not Rated | Synthetic | 100% Silver | 0.2 | Syringe | -70° to 485° | 490° | 0.010 | 40 Btu/hr. × in./sq. ft./°F | Silver | 0000000 | 000000 |
Grease without Thickener | |||||||||||
| 2 | Synthetic | 85% Silver | 0.5 | Jar | -40° to 300° | Not Rated | 0.005 | 60 Btu/hr. × in./sq. ft./°F | Silver | 0000000 | 000000 |
| 2 | Synthetic | 85% Silver | 1 | Jar | -40° to 300° | Not Rated | 0.005 | 60 Btu/hr. × in./sq. ft./°F | Silver | 0000000 | 000000 |
Food Industry Electrical-Insulating Grease
Use this grease in areas where there is the possibility of contact with food. Also known as dielectric grease, it lubricates and protects electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening.
Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Grease that is NSF Registered H1 and grease that meets FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food. Grease that meets NSF/ANSI 51 and FDA Compliant 21 CFR 175.300 are rated for direct contact with food. Grease that meets NSF/ANSI 61 is certified for use with components that come into contact with drinking water.
Grease lubricates most efficiently below the maximum temperature. DuPont Molykote 4 Electrical Insulating Compound also acts as a moisture barrier.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Dielectric Strength, V/mil | Color | Specifications Met | Each | |
DuPont Molykote 4 Electrical Insulating Compound—Silica Thickener | ||||||||||
| 2-3 | Synthetic | __ | 5.3 oz. | Tube | -40° to 400° | 450 | White | SAE AS8660, FDA Compliant 21 CFR 175.300, NSF/ANSI 61, NSF/ANSI 51 | 0000000 | 000000 |
| 2-3 | Synthetic | __ | 8 lbs. | Pail | -40° to 400° | 450 | White | SAE AS8660, FDA Compliant 21 CFR 175.300, NSF/ANSI 61, NSF/ANSI 51 | 0000000 | 000000 |
Silica Thickener | ||||||||||
| 1 | Synthetic | Silicone | 1 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 0000000 | 0000 |
| 1 | Synthetic | Silicone | 4 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 0000000 | 00000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Dielectric Strength, V/mil | Color | Specifications Met | Pkg. Qty. | Pkg. | |
DuPont Molykote 4 Electrical Insulating Compound—Silica Thickener | |||||||||||
| 2-3 | Synthetic | __ | 5.3 oz. | Tube | -40° to 400° | 450 | White | SAE AS8660, FDA Compliant 21 CFR 175.300, NSF/ANSI 61, NSF/ANSI 51 | 12 | 00000000 | 0000000 |
Silica Thickener | |||||||||||
| 1 | Synthetic | Silicone | 4 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 12 | 00000000 | 000000 |
Electrical-Insulating Grease
Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening.
Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Molykote 5 Compound is for use on insulators, bushings, and high-current switches.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp. | Dielectric Strength, V/mil | Color | Each | |
DuPont Molykote 5 Compound—Silica Thickener | |||||||||
| 3 | Synthetic | 5.3 oz. | Tube | -65° to 450° | Not Rated | 545 | Gray | 0000000 | 000000 |
Silica Thickener | |||||||||
| 1 | Synthetic | 5.3 oz. | Tube | -50° to 400° | Not Rated | 385 | White | 0000000 | 00000 |
| 1 | Synthetic | 14 oz. | Grease Gun Cartridge | -50° to 400° | Not Rated | 385 | White | 0000000 | 00000 |
| 1 | Synthetic | 16 oz. | Jar | -50° to 400° | Not Rated | 385 | White | 0000000 | 00000 |
| 2 | Synthetic | 0.2 oz. | One-Time-Use Pack | -40° to 400° | Not Rated | 830 | White | 0000000 | 000 |
| 2 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 830 | White | 0000000 | 00000 |
| 2 | Synthetic | 14 oz. | Grease Gun Cartridge | -40° to 400° | Nonmelting | 830 | White | 0000000 | 00000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp. | Dielectric Strength, V/mil | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 5 Compound—Silica Thickener | ||||||||||
| 3 | Synthetic | 5.3 oz. | Tube | -65° to 450° | Not Rated | 545 | Gray | 12 | 00000000 | 0000000 |
Silica Thickener | ||||||||||
| 1 | Synthetic | 5.3 oz. | Tube | -50° to 400° | Not Rated | 385 | White | 12 | 00000000 | 000000 |
| 1 | Synthetic | 16 oz. | Jar | -50° to 400° | Not Rated | 385 | White | 16 | 00000000 | 000000 |
| 2 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 830 | White | 12 | 00000000 | 000000 |
Grease for Electrical Contacts
Lubricate, clean, deoxidize, and prevent corrosion on electrical contacts to improve their performance.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease with only deoxidizer provides the best lubrication and is for use on clean surfaces.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Dielectric Strength, V/mil | Color | Each | |
Lithium Thickener | ||||||||||
| 2 | Synthetic | Deoxidizer | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 000000 | 000000 |
Electrically Conductive Antiseize Lubricants
Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Loctite® C5-A Copper-Based Anti-Seize lubricants can be used with salt water and petroleum-based chemicals. LB 8065 comes as a stick for no-mess application.
Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Dielectric strength measures the maximum voltage a lubricant can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Each | |
Loctite® LB 8008 C5-A Copper-Based Anti-Seize | ||||||||||
| 0.1 oz. | One-Time-Use Pack | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 000000 | 00000 |
| 0.2 oz. | One-Time-Use Pack | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000 |
| 1 oz. | Tube | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000 |
| 4 oz. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 4 oz. | Tube | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 10 oz. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 2.5 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 000000 | 00000 |
| 8 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
| 42 lbs. | Pail | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Loctite® LB 8065 C5-A Copper-Based Anti-Seize | ||||||||||
| 0.7 oz. | Stick | Copper, Graphite | Not Rated | Not Rated | Not Rated to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000 |
Lubricants | ||||||||||
| 4 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 12 oz. | Aerosol Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 16 oz. | Grease Gun Cartridge | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 2 lbs. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 1 gal. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Lubricants | |||||||||||
| 4 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 24 | 00000000 | 0000000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 12 oz. | Aerosol Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 16 oz. | Grease Gun Cartridge | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 2 lbs. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 6 | 00000000 | 000000 |
| 1 gal. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 4 | 00000000 | 000000 |
Heat-Transfer Potting Compounds
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Cartridge potting compound requires a gun and mixer nozzle (each sold separately) to dispense.
Dry Time | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
| 1.4 | Paste | 90 | 24 | 410 | 0.95 | -90° to 230° | 2 hrs. @ 140° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Blue | 00000000 | 000000 |
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
| 1.7 | Thick Liquid | 15 | 8 | 520 | 1.01 | -40° to 210° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
|---|---|---|---|
| Dispensing Gun for 1.7-oz. Cartridges | 00000000 | Each | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
|---|---|---|---|
| Mixer Nozzle for 1.7-oz. Cartridges | 00000000 | Each | 00000 |