McMaster-Carr logo
    Filter by
    System of Measurement
    Material
    Plain Bearing Type
    Shaft Mount Type
    Maximum Temperature
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Minimum Temperature
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    151 Products

    Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Moisture-Resistant Acetal—These bearings won’t warp or swell from humidity or direct contact with water, unlike nylon.
    Moisture-Resistant Ultra-Low-Friction Plastic Blend—These bearings won't warp or swell from humidity or direct contact with water. They glide effortlessly for applications with frequent starts and stops, such as conveyor systems.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    Moisture-Resistant Acetal
    6121014233 lb. @ 120 rpm30 lb. @ 120 rpmWhite-40 to 180000000000000
    9121416247 lb. @ 120 rpm29 lb. @ 120 rpmWhite-40 to 18000000000000
    10161622350 lb. @ 120 rpm46 lb. @ 120 rpmWhite-40 to 18000000000000
    12161524250 lb. @ 120 rpm47 lb. @ 120 rpmWhite-40 to 18000000000000
    12162024265 lb. @ 120 rpm47 lb. @ 120 rpmWhite-40 to 18000000000000
    142015263100 lb. @ 60 rpm95 lb. @ 60 rpmWhite-40 to 18000000000000
    182430303200 lb. @ 60 rpm100 lb. @ 60 rpmWhite-40 to 180000000000000
     
    Moisture-Resistant Ultra-Low-Friction Plastic Blend
    34.537.50.7536 lb. @ 120 rpm60 lb. @ 120 rpmYellow-50 to 190000000000000
    34.557.50.7560 lb. @ 120 rpm60 lb. @ 120 rpmYellow-50 to 190000000000000
    45.539.50.7536 lb. @ 120 rpm70 lb. @ 120 rpmYellow-50 to 190000000000000
    45.569.50.7570 lb. @ 120 rpm70 lb. @ 120 rpmYellow-50 to 190000000000000
    565100.560 lb. @ 120 rpm70 lb. @ 120 rpmYellow-50 to 190000000000000
    57311136 lb. @ 120 rpm80 lb. @ 120 rpmYellow-50 to 190000000000000
    57511160 lb. @ 120 rpm80 lb. @ 120 rpmYellow-50 to 190000000000000
    68412148 lb. @ 120 rpm85 lb. @ 120 rpmYellow-50 to 190000000000000
    68612170 lb. @ 120 rpm85 lb. @ 120 rpmYellow-50 to 190000000000000
    68812195 lb. @ 120 rpm85 lb. @ 120 rpmYellow-50 to 190000000000000
    6810121120 lb. @ 120 rpm85 lb. @ 120 rpmYellow-50 to 190000000000000
    61010142120 lb. @ 120 rpm105 lb. @ 120 rpmYellow-50 to 190000000000000
    810315136 lb. @ 120 rpm100 lb. @ 120 rpmYellow-50 to 190000000000000
    810515160 lb. @ 120 rpm100 lb. @ 120 rpmYellow-50 to 190000000000000
    810615170 lb. @ 120 rpm100 lb. @ 120 rpmYellow-50 to 190000000000000
    810715185 lb. @ 120 rpm100 lb. @ 120 rpmYellow-50 to 190000000000000
    810815195 lb. @ 120 rpm100 lb. @ 120 rpmYellow-50 to 190000000000000
    81010141120 lb. @ 120 rpm90 lb. @ 120 rpmYellow-50 to 190000000000000
    81010151120 lb. @ 120 rpm100 lb. @ 120 rpmYellow-50 to 190000000000000
    81016121190 lb. @ 120 rpm60 lb. @ 120 rpmYellow-50 to 190000000000000
    8129162105 lb. @ 120 rpm110 lb. @ 120 rpmYellow-50 to 190000000000000
    81212162145 lb. @ 120 rpm110 lb. @ 120 rpmYellow-50 to 190000000000000
    81230162360 lb. @ 120 rpm110 lb. @ 120 rpmYellow-50 to 190000000000000
    10123.515142 lb. @ 120 rpm75 lb. @ 120 rpmYellow-50 to 190000000000000
    10141417.51170 lb. @ 120 rpm110 lb. @ 120 rpmYellow-50 to 190000000000000
    101610223120 lb. @ 120 rpm165 lb. @ 120 rpmYellow-50 to 190000000000000
    101616223190 lb. @ 120 rpm165 lb. @ 120 rpmYellow-50 to 190000000000000
    1113518160 lb. @ 120 rpm105 lb. @ 120 rpmYellow-50 to 190000000000000
    12144.518150 lb. @ 120 rpm95 lb. @ 120 rpmYellow-50 to 190000000000000
    121410181120 lb. @ 120 rpm95 lb. @ 120 rpmYellow-50 to 190000000000000
    121620222240 lb. @ 120 rpm145 lb. @ 120 rpmYellow-50 to 190000000000000
    1218824395 lb. @ 120 rpm170 lb. @ 120 rpmYellow-50 to 190000000000000
    121812243145 lb. @ 120 rpm170 lb. @ 120 rpmYellow-50 to 190000000000000
    121820223240 lb. @ 120 rpm145 lb. @ 120 rpmYellow-50 to 190000000000000
    141820222480 lb. @ 60 rpm245 lb. @ 60 rpmYellow-50 to 190000000000000
    142020253480 lb. @ 60 rpm320 lb. @ 60 rpmYellow-50 to 190000000000000
    15179231215 lb. @ 60 rpm250 lb. @ 60 rpmYellow-50 to 190000000000000
    151712231290 lb. @ 60 rpm250 lb. @ 60 rpmYellow-50 to 190000000000000
    151717231410 lb. @ 60 rpm250 lb. @ 60 rpmYellow-50 to 190000000000000
    152120273480 lb. @ 60 rpm350 lb. @ 60 rpmYellow-50 to 190000000000000
    161812241290 lb. @ 60 rpm250 lb. @ 60 rpmYellow-50 to 190000000000000
    161817241410 lb. @ 60 rpm250 lb. @ 60 rpmYellow-50 to 190000000000000
    162215283360 lb. @ 60 rpm360 lb. @ 60 rpmYellow-50 to 190000000000000
    162220283480 lb. @ 60 rpm360 lb. @ 60 rpmYellow-50 to 190000000000000
    17199251215 lb. @ 60 rpm250 lb. @ 60 rpmYellow-50 to 190000000000000
    182012261290 lb. @ 60 rpm250 lb. @ 60 rpmYellow-50 to 190000000000000
    182112251290 lb. @ 60 rpm225 lb. @ 60 rpmYellow-50 to 190000000000000
    192223261550 lb. @ 60 rpm230 lb. @ 60 rpmYellow-50 to 190000000000000
    202311.5301.5270 lb. @ 60 rpm310 lb. @ 60 rpmYellow-50 to 190000000000000
    202315.5301.5370 lb. @ 60 rpm310 lb. @ 60 rpmYellow-50 to 190000000000000
    202321.5301.5520 lb. @ 60 rpm310 lb. @ 60 rpmYellow-50 to 190000000000000
    202615323360 lb. @ 60 rpm370 lb. @ 60 rpmYellow-50 to 190000000000000
    202625323600 lb. @ 60 rpm370 lb. @ 60 rpmYellow-50 to 190000000000000
    22258321.5190 lb. @ 60 rpm320 lb. @ 60 rpmYellow-50 to 190000000000000
    243030363720 lb. @ 60 rpm380 lb. @ 60 rpmYellow-50 to 190000000000000
    252812351.5290 lb. @ 60 rpm320 lb. @ 60 rpmYellow-50 to 190000000000000
    252814.5351.5350 lb. @ 60 rpm320 lb. @ 60 rpmYellow-50 to 190000000000000
    252821.5351.5520 lb. @ 60 rpm320 lb. @ 60 rpmYellow-50 to 190000000000000
    28327352340 lb. @ 30 rpm480 lb. @ 30 rpmYellow-50 to 190000000000000
    303820444970 lb. @ 30 rpm890 lb. @ 30 rpmYellow-50 to 1900000000000000
    3038304441,450 lb. @ 30 rpm890 lb. @ 30 rpmYellow-50 to 1900000000000000
    3038364441,750 lb. @ 30 rpm890 lb. @ 30 rpmYellow-50 to 1900000000000000
    353916472770 lb. @ 30 rpm790 lb. @ 30 rpmYellow-50 to 190000000000000
    3539264721,250 lb. @ 30 rpm790 lb. @ 30 rpmYellow-50 to 1900000000000000
    404420522970 lb. @ 30 rpm810 lb. @ 30 rpmYellow-50 to 1900000000000000
    4044405221,900 lb. @ 30 rpm810 lb. @ 30 rpmYellow-50 to 1900000000000000
    455020582970 lb. @ 30 rpm880 lb. @ 30 rpmYellow-50 to 190000000000000
    505511.5632550 lb. @ 30 rpm890 lb. @ 30 rpmYellow-50 to 1900000000000000
    5055506322,400 lb. @ 30 rpm890 lb. @ 30 rpmYellow-50 to 1900000000000000
     

    Dry-Running Thrust Bearings

    Image of Product. Front orientation. Thrust Bearings. Dry-Running Thrust Bearings.
    Made of naturally slippery plastic so there's no lubricant to maintain or make a mess. These bearings are ideal for spic-and-span spaces since oil won't drip off, wash out, or collect dust over time. They'll also never rust.
    Moisture-Resistant Plastic Blend—Similar to acetal, these bearings won't warp or swell from water or humidity.
    For Shaft
    Dia.
    OD
    Thk.
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    Moisture-Resistant Plastic Blend
    3/8"5/8"0.04"21 lb. @ 120 rpmGray-40 to 260000000000000
    1/2"7/8"0.0585"43 lb. @ 120 rpmGray-40 to 26000000000000
    5/8"1 1/8"0.0585"70 lb. @ 60 rpmGray-40 to 26000000000000
    3/4"1 1/4"0.0585"80 lb. @ 60 rpmGray-40 to 26000000000000
    7/8"1 1/2"0.0585"125 lb. @ 60 rpmGray-40 to 26000000000000
    1"1 3/4"0.0585"170 lb. @ 60 rpmGray-40 to 26000000000000
    1 1/4"2 1/8"0.0585"250 lb. @ 30 rpmGray-40 to 26000000000000
    1 1/2"2 1/2"0.0585"330 lb. @ 30 rpmGray-40 to 260000000000000
    1 3/4"2 3/4"0.0585"380 lb. @ 30 rpmGray-40 to 260000000000000
    2"3"0.0895"420 lb. @ 30 rpmGray-40 to 260000000000000
    4 mm8 mm0.5 mm6 lb. @ 120 rpmGray-40 to 26000000000000
    4 mm9 mm0.6 mm8.5 lb. @ 120 rpmGray-40 to 26000000000000
    4 mm10 mm0.5 mm11 lb. @ 120 rpmGray-40 to 26000000000000
    4 mm11 mm0.5 mm13 lb. @ 120 rpmGray-40 to 26000000000000
    5 mm9.5 mm0.6 mm8.5 lb. @ 120 rpmGray-40 to 26000000000000
    5 mm12 mm1 mm15 lb. @ 120 rpmGray-40 to 26000000000000
    6 mm11 mm1 mm11 lb. @ 120 rpmGray-40 to 26000000000000
    6 mm12 mm1.5 mm14 lb. @ 120 rpmGray-40 to 26000000000000
    6 mm15 mm1.5 mm24 lb. @ 120 rpmGray-40 to 26000000000000
    6 mm20 mm1.5 mm47 lb. @ 120 rpmGray-40 to 26000000000000
    7 mm12 mm0.5 mm12 lb. @ 120 rpmGray-40 to 26000000000000
    8 mm15 mm0.5 mm21 lb. @ 120 rpmGray-40 to 26000000000000
    8 mm15 mm1.5 mm21 lb. @ 120 rpmGray-40 to 26000000000000
    8 mm18 mm1.5 mm34 lb. @ 120 rpmGray-40 to 26000000000000
    8 mm18 mm2 mm34 lb. @ 120 rpmGray-40 to 26000000000000
    8 mm25 mm1.5 mm70 lb. @ 120 rpmGray-40 to 26000000000000
    9 mm18 mm1.5 mm31 lb. @ 120 rpmGray-40 to 26000000000000
    10 mm17.8 mm0.5 mm28 lb. @ 120 rpmGray-40 to 26000000000000
    10 mm18 mm1 mm29 lb. @ 120 rpmGray-40 to 26000000000000
    10 mm18 mm1.5 mm29 lb. @ 120 rpmGray-40 to 26000000000000
    10 mm18 mm2 mm29 lb. @ 120 rpmGray-40 to 26000000000000
    10 mm20 mm1.5 mm39 lb. @ 120 rpmGray-40 to 26000000000000
    11 mm15 mm1 mm13 lb. @ 120 rpmGray-40 to 26000000000000
    11 mm27 mm0.5 mm75 lb. @ 120 rpmGray-40 to 26000000000000
    12 mm20 mm0.5 mm33 lb. @ 120 rpmGray-40 to 26000000000000
    12 mm20 mm1 mm33 lb. @ 120 rpmGray-40 to 26000000000000
    12 mm24 mm1.5 mm55 lb. @ 120 rpmGray-40 to 26000000000000
    12.2 mm30 mm1.5 mm95 lb. @ 120 rpmGray-40 to 26000000000000
    14 mm22 mm1 mm37 lb. @ 60 rpmGray-40 to 26000000000000
    14 mm26 mm1.5 mm60 lb. @ 60 rpmGray-40 to 26000000000000
    15 mm19 mm0.8 mm17 lb. @ 60 rpmGray-40 to 26000000000000
    15 mm22 mm0.8 mm34 lb. @ 60 rpmGray-40 to 26000000000000
    15 mm24 mm1.5 mm46 lb. @ 60 rpmGray-40 to 26000000000000
    16 mm28 mm1 mm65 lb. @ 60 rpmGray-40 to 26000000000000
    18 mm32 mm1.5 mm90 lb. @ 60 rpmGray-40 to 26000000000000
    20 mm36 mm1.5 mm115 lb. @ 60 rpmGray-40 to 26000000000000
    22 mm30 mm1.5 mm50 lb. @ 60 rpmGray-40 to 26000000000000
    22 mm38 mm1.5 mm125 lb. @ 60 rpmGray-40 to 26000000000000
    26 mm44 mm1.5 mm165 lb. @ 30 rpmGray-40 to 26000000000000
    28 mm48 mm1.5 mm195 lb. @ 30 rpmGray-40 to 26000000000000
    32 mm54 mm1.5 mm245 lb. @ 30 rpmGray-40 to 26000000000000
    40 mm60 mm3.5 mm260 lb. @ 30 rpmGray-40 to 260000000000000
    48 mm60 mm2 mm170 lb. @ 30 rpmGray-40 to 260000000000000
    78 mm114 mm1.5 mm900 lb. @ 30 rpmGray-40 to 260000000000000
     

    Dry-Running Panel-Mount Sleeve Bearings

    Image of Product. Front orientation. Mounted Bearings. Dry-Running Panel-Mount Sleeve Bearings.
    Leave the lubricant in the supply closet—these low-maintenance sleeve bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings withstand grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. They mount securely in thin panels.
    Acetal—The most common choice for plastic bearings, acetal is wear-resistant and affordable.
    Ultra-Low-Friction PTFE-Filled Acetal—Made from a special blend of acetal and PTFE, these extra-slippery bearings are ideal for conveyors and other machinery with frequent starts and stops.
    Steel Housing—Best for dry environments as moisture will cause them to rust.
    Press-Fit Panel Mount—Press these bearings into plastic panels or thin sheet metal to mount them by hand. They're a good fit for tight spaces, or if you'd like a removable mounting option. The sturdy flange prevents bearings from pulling through, giving you added stability.
    Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
    For Shaft
    Dia.
    OD
    Wd.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Misalignment
    Capability
    Each
    Acetal Bearing with Steel Housing
     
    Press-Fit Panel Mount
    1/4"0.501"3/8"9/16"1/32"35 lb. @ 120 rpm000000000000
    5/16"0.625"7/16"11/16"1/32"41 lb. @ 120 rpm00000000000
    3/8"0.625"7/16"11/16"1/32"41 lb. @ 120 rpm00000000000
    1/2"0.812"39/64"7/8"1/32"55 lb. @ 120 rpm000000000000
    5/8"1.062"49/64"1 1/8"1/32"145 lb. @ 60 rpm000000000000
    6 mm12.73 mm9.6 mm14.2 mm0.8 mm36 lb. @ 120 rpm000000000000
    8 mm15.88 mm10.8 mm17.4 mm0.8 mm40 lb. @ 120 rpm000000000000
    10 mm15.88 mm10.8 mm17.4 mm0.8 mm40 lb. @ 120 rpm00000000000
     
    Ultra-Low-Friction PTFE-Filled Acetal Bearing with Steel Housing
     
    Press-Fit Panel Mount
    1/4"0.501"3/8"9/16"1/32"80 lb. @ 120 rpm000000000000
    5/16"0.625"7/16"11/16"1/32"95 lb. @ 120 rpm000000000000
    3/8"0.625"7/16"11/16"1/32"95 lb. @ 120 rpm00000000000
    1/2"0.812"39/64"7/8"1/32"135 lb. @ 120 rpm000000000000
    5/8"1.062"49/64"1 1/8"1/32"340 lb. @ 60 rpm000000000000
    6 mm12.73 mm9.6 mm14.3 mm0.8 mm80 lb. @ 120 rpm000000000000
    8 mm15.88 mm10.8 mm17.4 mm0.8 mm90 lb. @ 120 rpm000000000000
    12 mm20.63 mm14.9 mm22.2 mm0.8 mm130 lb. @ 120 rpm000000000000
     

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Recycled Plastic Blend—A sustainable alternative to new plastic. These bearings handle higher loads and a wider temperature range than nylon.
    Each
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    Recycled Plastic Blend
    68690 lb. @ 120 rpmGray-40 to 2650000000000000000000000
    81010150 lb. @ 120 rpmGray-40 to 2650000000000000000000
    101210150 lb. @ 120 rpmGray-40 to 2650000000000000000000
    121412180 lb. @ 120 rpmGray-40 to 2650000000000000000000
    161815450 lb. @ 60 rpmGray-40 to 2650000000000000000000
     
    back to top