These thermostats work with low-voltage HVAC systems that have only one speed.

Connect to a Wi-Fi network so you can remotely program, monitor, and control the temperature from a computer, tablet, or smart phone.

Regulate line-voltage HVAC systems.

Control one- and two-speed heaters and air conditioners.

Place sensor in enclosures or different rooms than the rest of the thermostat to control temperature from outside the space. Thermostats work with line-voltage HVAC systems.

Commonly used with hydronic heaters, this thermostat senses the temperature of liquids. The thermowell protects the sensor.

Use to regulate line-voltage HVAC systems where flammable gases, vapors, and dust are present. Thermostats are rated Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Restrict access and protect thermostats from damage.

Keep electronics in your enclosure from getting too hot or cold with these thermostats that control two devices at once.

When duct airflow varies from the setpoint, these actuators open and close until the system requirement is restored.

These temperature switches mount on walls and take remote temperature readings with a probe on a cable.

Housing is UL listed for environments with flammable gases, combustible dust, and ignitable fibers, such as chemical plants, refineries, and grain elevators.

Install the threaded probe directly into tanks, pipelines, and other process components to turn heating equipment on or off at a specified temperature.

Often used in hazardous locations, such as chemical plants, refineries, and grain elevators, these switches have a housing that’s UL listed for environments with flammable gases, combustible dust, and ignitable fibers.

The faceplate is sealed to meet NEMA 4X for protection in washdown environments with splashing water, corrosive liquid, and dust.

Install these controllers into instrument panels.