Manufacturer Manufacturer | Show |
|---|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Operating Mechanism Operating Mechanism |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Container Type Container Type |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Battery Chemistry Battery Chemistry |
|---|
|
Measuring Tool Connection Type Measuring ToolConnection Type |
|---|
|
Electronic Thickness Gauges
Find the thickness of sheet metal, paper, and other flat stock. All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
| 0"-0.47" | 0 mm-12 mm | ±0.00015" | ±0.0038 mm | 0.00005" 0.0001" 0.0005" | 0.001 mm, 0.01 mm | 3/4" | 0.25" | Carbide | Yes | Mitutoyo | 547-400S | 00000000 | 000000 |
Electronic Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure the thickness of sheet metal, paper, and other flat stock. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
| 0"-0.47" | 0 mm-12 mm | ±0.00015" | ±0.0038 mm | 0.00005" 0.0001" 0.0005" | 0.001 mm, 0.01 mm | 3/4" | 0.25" | Carbide | Yes | Mitutoyo | 547-400S | 00000000 | 000000 |
Electronic Thickness Gauges for Pipe and Tubing
Measure the wall thickness of pipe, tubing, and other curved surfaces with these gauges. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. All have SPC data output to connect to a computer or data processor, but model 209-954 needs an SPC output adapter (sold separately) for SPC capabilities.
USB data cables (sold separately) connect gauges directly to your PC.
10-pin data cables (sold separately) connect gauges to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect gauges to your PC through 10-pin data cables.
Wireless data transmitters and receivers (sold separately) allow you to transmit measurement data from gauges to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Tip Shape | Spindle Tip Shape | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
With SPC Data Output | |||||||||||||||
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 3/4" | 0.14" | Steel | Round | Flat | Yes | Mitutoyo | 547-561S | 00000000 | 0000000 |
| 0"-1.97" | 0 mm-50 mm | ±0.002" | ±0.050 mm | 0.001" | 0.01 mm | 6 9/16" | 0.12" | Carbide | Ball | Ball | Yes | Mitutoyo | 209-954 | 0000000 | 000000 |
| For Manufacturer Model Number | Each | |
| 209-954 | 0000000 | 0000000 |
| For Manufacturer Model Number | Cord Length | Each | |
| 547-561S, 209-954 | 40" | 0000000 | 0000000 |
| For Manufacturer Series | Includes | Each | |
| U-WAVE-T | USB Cable | 000000 | 0000000 |
Electronic Thickness Gauges for Pipe and Tubing with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They measure the wall thickness of pipe, tubing, and other curved surfaces. Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. All have SPC data output to connect to a computer or data processor, but model 209-954 needs an SPC output adapter (sold separately) for SPC capabilities.
USB data cables (sold separately) connect gauges directly to your PC.
10-pin data cables (sold separately) connect gauges to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect gauges to your PC through 10-pin data cables.
Wireless data transmitters and receivers (sold separately) allow you to transmit measurement data from gauges to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Tip Shape | Spindle Tip Shape | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
With SPC Data Output | |||||||||||||||
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 3/4" | 0.14" | Steel | Round | Flat | Yes | Mitutoyo | 547-561S | 00000000 | 0000000 |
| 0"-1.97" | 0 mm-50 mm | ±0.002" | ±0.050 mm | 0.001" | 0.01 mm | 6 9/16" | 0.12" | Carbide | Ball | Ball | Yes | Mitutoyo | 209-954 | 0000000 | 000000 |
| For Manufacturer Model Number | Each | |
| 209-954 | 0000000 | 0000000 |
| For Manufacturer Model Number | Cord Length | Each | |
| 547-561S, 209-954 | 40" | 0000000 | 0000000 |
| For Manufacturer Series | Includes | Each | |
| U-WAVE-T | USB Cable | 000000 | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing, and Flat Surfaces
A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312S | 00000000 | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing,
and Flat Surfaces with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312S | 00000000 | 0000000 |
Long-Reach Electronic Thickness Gauges
An extra-deep throat provides a long reach for measuring sheet metal and other large items. This gauge has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 00000000 | 0000000 |
Long-Reach Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. An extra-deep throat provides a long reach for measuring sheet metal and other large items. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 0000000 | 0000000 |
Pocket Electronic Thickness Gauges
Small enough to fit between your thumb and index finger, use this gauge for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Pocket Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Small enough to fit between your thumb and index finger, use it for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Dial Thickness Gauges
A loop handle allows you to comfortably hold these gauges while operating the thumb lever.
For technical drawings and 3-D models, click on a part number.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326A | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300A | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304A | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301A | 000000 | 000000 |
Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. A loop handle allows you to comfortably hold them while operating the thumb lever.
For technical drawings and 3-D models, click on a part number.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326A | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300A | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304A | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301A | 0000000 | 000000 |
Mitutoyo USB Cables
Use these cables to connect measuring tools with SPC data output directly to a PC. Select the cable with the connection that is compatible with your measuring tool’s SPC output port. Measurement data can be imported into Microsoft Excel or any SPC software.
Cables with a data out switch connection require software to extract data from your measuring tool.
Use cables with a 10-pin and straight connection with a Mitutoyo 10-Pin to USB Adapter to extract data from your measuring tool.
USB Connection | |||||||
|---|---|---|---|---|---|---|---|
| Mitutoyo Measuring Tool Connection Type | Standard | Type | Lg. | Manufacturer Model No. | For Manufacturer Model No. | Each | |
| Data Out Switch A | 2.0 | A | 80" | 06AFM380A | 500-762-20, 500-763-20, 500-764-10, 552-313-10, 552-314-10, 552-315-10, 571-261-20, 573-701-20, 573-705, 573-721-20, 573-761-20 | 000000 | 0000000 |
| Data Out Switch B | 2.0 | A | 80" | 06AFM380B | 293-130, 293-330-30, 293-331-30, 293-332-30, 293-333-30, 293-335-30, 293-336-30, 293-350-30, 293-351-30, 314-351-30, 329-350-30, 329-351-30, 340-351-30, 340-352-30, 350-351-30, 350-352-30, 350-354-30, 389-351-30, 422-330-30 | 000000 | 000000 |
| Data Out Switch C | 2.0 | A | 80" | 06AFM380C | 164-164, 389-714, 500-170-30, 500-171-30, 500-172-30, 500-173, 500-505-10, 500-506-10, 500-507-10, 571-211-30, 571-212-30, 571-213-10, 572-210-30, 572-211-30, 572-213-10, 572-311-10, 572-313-10, 573-291-30 | 000000 | 000000 |
| 6 Pin | 2 | A | 80" | 06AFM380E | 209-954 | 000000 | 000000 |
| 10 Pin | 2.0 | A | 80" | 06AFM380D | 543-562A, 543-564A | 000000 | 000000 |
| Straight | 2.0 | A | 80" | 06AFM380F | 192-630-10, 192-631-10, 192-632-10, 543-392, 543-392B, 543-402, 543-402B, 543-472B, 543-783, 543-783B, 543-793, 543-793B, 543-796, 543-796B, 547-217S, 547-218S, 547-312S, 547-400S, 547-500S, 547-520S, 547-561S, 570-312, 570-313, 570-314, 570-412, 570-414, 572-475, 575-123 | 000000 | 000000 |
Mitutoyo 10-Pin Cables
Connect measuring tools with SPC data output to miniprocessors and multiplexers. To extract data from your measuring tool, use these cables with a Mitutoyo 10-Pin to USB Adapter. Select a cable with the connection that is compatible with your measuring tool’s SPC output port.
| Mitutoyo Measuring Tool Connection Type | Data Processor Connection Type | Manufacturer Model No. | For Manufacturer Model No. | Each | |
40" Lg. | |||||
|---|---|---|---|---|---|
| Data Out Switch A | 10-Pin Mitutoyo Connector | 05CZA624 | 500-762-20, 500-763-20, 500-764-10, 552-313-10, 552-314-10, 552-315-10, 571-261-20, 573-701-20, 573-705, 573-721-20, 573-761-20 | 00000000 | 0000000 |
| Data Out Switch B | 10-Pin Mitutoyo Connector | 05CZA662 | 293-130, 293-330-30, 293-331-30, 293-332-30, 293-333-30, 293-335-30, 293-336-30, 293-350-30, 293-351-30, 314-351-30, 329-350-30, 329-351-30, 340-351-30, 340-352-30, 350-351-30, 350-352-30, 350-354-30, 389-351-30, 422-330-30 | 00000000 | 00000 |
| Data Out Switch C | 10-Pin Mitutoyo Connector | 959149 | 164-164, 389-714, 500-170-30, 500-171-30, 500-172-30, 500-173, 500-505-10, 500-506-10, 500-507-10, 571-211-30, 571-212-30, 571-213-10, 572-210-30, 572-211-30, 572-213-10, 572-311-10, 572-313-10, 573-291-30 | 0000000 | 00000 |
| 6 Pin | 10-Pin Mitutoyo Connector | 937387 | 209-954 | 00000000 | 00000 |
| 10 Pin | 10-Pin Mitutoyo Connector | 936937 | 543-562A, 543-564A | 00000000 | 00000 |
| Straight Mitutoyo Connector | 10-Pin Mitutoyo Connector | 905338 | 192-630-10, 192-631-10, 192-632-10, 543-392, 543-392B, 543-402, 543-402B, 543-472B, 543-783, 543-783B, 543-793, 543-793B, 543-796, 543-796B, 547-217S, 547-218S, 547-312S, 547-400S, 547-500S, 547-520S, 547-561S, 570-312, 570-313, 570-314, 570-412, 570-414, 572-475, 575-123 | 00000000 | 00000 |
80" Lg. | |||||
| Data Out Switch A | 10-Pin Mitutoyo Connector | 05CZA625 | 500-762-20, 500-763-20, 500-764-10, 552-313-10, 552-314-10, 552-315-10, 571-261-20, 573-701-20, 573-705, 573-721-20, 573-761-20 | 00000000 | 000000 |
| Data Out Switch B | 10-Pin Mitutoyo Connector | 05CZA663 | 293-130, 293-330-30, 293-331-30, 293-332-30, 293-333-30, 293-335-30, 293-336-30, 293-350-30, 293-351-30, 314-351-30, 329-350-30, 329-351-30, 340-351-30, 340-352-30, 350-351-30, 350-352-30, 350-354-30, 389-351-30, 422-330-30 | 00000000 | 000000 |
| Data Out Switch C | 10-Pin Mitutoyo Connector | 959150 | 164-164, 389-714, 500-170-30, 500-171-30, 500-172-30, 500-173, 500-505-10, 500-506-10, 500-507-10, 571-211-30, 571-212-30, 571-213-10, 572-210-30, 572-211-30, 572-213-10, 572-311-10, 572-313-10, 573-291-30 | 00000000 | 00000 |
| 6 Pin | 10-Pin Mitutoyo Connector | 965013 | 209-954 | 00000000 | 00000 |
| 10 Pin | 10-Pin Mitutoyo Connector | 965014 | 543-562A, 543-564A | 00000000 | 00000 |
| Straight Mitutoyo Connector | 10-Pin Mitutoyo Connector | 905409 | 192-630-10, 192-631-10, 192-632-10, 543-392, 543-392B, 543-402, 543-402B, 543-472B, 543-783, 543-783B, 543-793, 543-793B, 543-796, 543-796B, 547-217S, 547-218S, 547-312S, 547-400S, 547-500S, 547-520S, 547-561S, 570-312, 570-313, 570-314, 570-412, 570-414, 572-475, 575-123 | 00000000 | 00000 |
Mitutoyo Wireless Transmitters
Wirelessly transmit measurement data to a PC. Select the cable with the connection that is compatible with your measuring tool’s SPC output port. A wireless receiver (sold separately) is required. Measurement data can be imported into Microsoft Excel or any SPC software.
| Mitutoyo Measuring Tool Connection Type | Communication Range, ft. | Lg. | Wd. | Ht. | Power Source | Batteries Included | Manufacturer Series | Manufacturer Model No. | For Manufacturer Model No. | Each | |
| Data Out Switch A | 60 | 1 3/4" | 1 1/4" | 3/4" | Battery | Yes | U-WAVE-T | 02AZD730G-A, 02AZD790A | 500-762-20, 500-763-20, 500-764-10, 552-313-10, 552-314-10, 552-315-10, 571-261-20, 573-701-20, 573-705, 573-721-20, 573-761-20 | 000000 | 0000000 |
| Data Out Switch B | 60 | 1 3/4" | 1 1/4" | 3/4" | Battery | Yes | U-WAVE-T | 02AZD730G-B, 02AZD790B | 293-130, 293-330-30, 293-331-30, 293-332-30, 293-333-30, 293-335-30, 293-336-30, 293-350-30, 293-351-30, 314-351-30, 329-350-30, 329-351-30, 340-351-30, 340-352-30, 350-351-30, 350-352-30, 350-354-30, 389-351-30, 422-330-30 | 000000 | 000000 |
| Data Out Switch C | 60 | 1 3/4" | 1 1/4" | 3/4" | Battery | Yes | U-WAVE-T | 02AZD730G-C, 02AZD790C | 164-164, 389-714, 500-170-30, 500-171-30, 500-172-30, 500-173, 500-505-10, 500-506-10, 500-507-10, 571-211-30, 571-212-30, 571-213-10, 572-210-30, 572-211-30, 572-213-10, 572-311-10, 572-313-10, 573-291-30 | 000000 | 000000 |
| 6 Pin | 60 | 1 3/4" | 1 1/4" | 3/4" | Battery | Yes | U-WAVE-T | 02AZD730G-E | 209-954 | 000000 | 000000 |
| 10 Pin | 60 | 1 3/4" | 1 1/4" | 3/4" | Battery | Yes | U-WAVE-T | 02AZD730G-D, 02AZD790D | 543-562A, 543-564A | 000000 | 000000 |
| Straight | 60 | 1 3/4" | 1 1/4" | 3/4" | Battery | Yes | U-WAVE-T | 02AZD730G-F, 02AZD790F | 192-630-10, 192-631-10, 192-632-10, 543-392, 543-392B, 543-402, 543-402B, 543-472B, 543-783, 543-783B, 543-793, 543-793B, 543-796, 543-796B, 547-217S, 547-218S, 547-312S, 547-400S, 547-500S, 547-520S, 547-561S, 570-312, 570-313, 570-314, 570-412, 570-414, 572-475, 575-123 | 000000 | 000000 |
| Replacement Button Cell Battery (Pkg. of 1) | 0000000 | Pkg. | 00000 |
USB Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Computer Connection Type | Standard | Type | Communication Range, ft. | Lg. | Wd. | Ht. | Includes | Manufacturer Model No. | For Manufacturer Series | Each | |
| USB | 2.0 | A | 60 | 5 1/2" | 3 1/4" | 1 1/4" | USB Cable | 02AZD810D | U-WAVE-T | 000000 | 0000000 |