Thin Section Bearings | McMaster-Carr

Filter by

Shaft Diameter

System of Measurement

Width

Bearing Seal Type

Ball Bearing Profile

For Housing ID

For Load Direction

Combined Radial, Thrust, and Moment

Ring Material

Cage Material

Ball Material

Maximum Rotation Speed

Lubricant

Dynamic Radial Load Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 3,999 lb.

4,000 lb. or greater

REACH

Compliant

ABEC Rating

DFARS Specialty Metals

Radial Clearance

0.0026 mm to 0.0177 mm

0.005 mm to 0.013 mm

0.0051 mm to 0.0203 mm

Export Control Classification Number (ECCN)

RoHS

Static Radial Load Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 3,999 lb.

4,000 lb. or greater

Dynamic Moment Load Capacity

Less than 75 ft·lbf

75 ft·lbf to 99 ft·lbf

100 ft·lbf to 124 ft·lbf

125 ft·lbf to 199 ft·lbf

200 ft·lbf or greater

Not Rated

Lubrication

Lubricated

Required

Static Moment Load Capacity

Less than 100 ft·lbf

100 ft·lbf to 199 ft·lbf

200 ft·lbf to 249 ft·lbf

250 ft·lbf to 499 ft·lbf

500 ft·lbf or greater

Maximum Temperature

153 Products

About Ball and Roller Bearings

Open

Shielded

These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.

440 stainless steel bearings are more corrosion resistant than steel bearings.

Open bearings dissipate heat more efficiently than shielded bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

			Radial Load Cap., lbs.		Thrust Load Cap., lbs.		Moment Load Cap., ft.-lbs.
For Shaft Dia.	For Housing ID	Wd.	Dynamic	Static	Dynamic	Static	Dynamic	Static	Max. Speed, rpm	Lubrication	Contact Angle	Temp. Range, °F	ABEC Rating		Each
Steel Ring
Open
2"	2 1/2"	1/4"	510	680	790	1,700	35	60	1,500	Required	30°	-60° to 250°	ABEC-1F	0000000	0000000
2"	2 5/8"	5/16"	750	930	1,100	2,300	50	85	1,500	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
2 1/2"	3"	1/4"	580	830	910	2,050	50	95	1,200	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
2 1/2"	3 1/8"	5/16"	840	1,100	1,250	2,800	70	130	1,200	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
3"	3 1/2"	1/4"	640	990	1,000	2,450	65	130	800	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
3"	3 5/8"	5/16"	930	1,300	1,400	3,350	95	180	1,000	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
3 1/2"	4"	1/4"	700	1,100	1,100	2,850	80	170	700	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
3 1/2"	4 1/8"	5/16"	1,000	1,500	1,550	3,850	120	240	700	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
4"	4 1/2"	1/4"	750	1,250	1,200	3,200	100	220	600	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
4"	4 5/8"	5/16"	1,050	1,750	1,700	4,350	140	310	600	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
5"	5 1/2"	1/4"	850	1,550	1,400	3,950	130	340	500	Required	30°	-60° to 250°	ABEC-1F	0000000	000000
5"	5 5/8"	5/16"	1,200	2,150	1,950	5,350	200	470	500	Required	30°	-60° to 250°	ABEC-1F	0000000	00000000
6"	6 1/2"	1/4"	950	1,900	1,550	4,700	180	490	300	Required	30°	-60° to 250°	ABEC-1F	0000000	00000000
6"	6 5/8"	5/16"	1,350	2,550	2,200	6,400	260	670	400	Required	30°	-60° to 250°	ABEC-1F	0000000	00000000
7"	7 1/2"	1/4"	1,000	2,200	1,700	5,500	230	660	200	Required	30°	-60° to 250°	ABEC-1F	0000000	00000000
10mm	15mm	3mm	190	95	Not Rated	Not Rated	Not Rated	Not Rated	15,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
10mm	19mm	7mm	380	185	Not Rated	Not Rated	Not Rated	Not Rated	43,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
12mm	18mm	4mm	205	115	Not Rated	Not Rated	Not Rated	Not Rated	15,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
15mm	21mm	4mm	210	130	Not Rated	Not Rated	Not Rated	Not Rated	13,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
17mm	23mm	4mm	220	145	Not Rated	Not Rated	Not Rated	Not Rated	11,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
20mm	27mm	4mm	310	160	Not Rated	Not Rated	Not Rated	Not Rated	10,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
20mm	32mm	10mm	900	550	Not Rated	Not Rated	Not Rated	Not Rated	25,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
25mm	32mm	4mm	245	185	Not Rated	Not Rated	Not Rated	Not Rated	8,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
30mm	37mm	4mm	250	210	Not Rated	Not Rated	Not Rated	Not Rated	7,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
35mm	44mm	5mm	410	360	Not Rated	Not Rated	Not Rated	Not Rated	6,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
40mm	50mm	6mm	560	500	Not Rated	Not Rated	Not Rated	Not Rated	5,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
40mm	52mm	7mm	1,100	930	Not Rated	Not Rated	Not Rated	Not Rated	14,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
45mm	55mm	6mm	580	530	Not Rated	Not Rated	Not Rated	Not Rated	4,600	Lubricated	__	-50° to 130°	ABEC-1	00000000	000000
45mm	58mm	7mm	1,350	1,200	Not Rated	Not Rated	Not Rated	Not Rated	13,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
50mm	65mm	7mm	1,450	1,350	Not Rated	Not Rated	Not Rated	Not Rated	11,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
50mm	72mm	12mm	3,250	2,600	Not Rated	Not Rated	Not Rated	Not Rated	11,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
55mm	72mm	9mm	1,950	1,800	Not Rated	Not Rated	Not Rated	Not Rated	10,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
55mm	80mm	13mm	3,700	3,150	Not Rated	Not Rated	Not Rated	Not Rated	10,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
60mm	78mm	10mm	2,550	2,350	Not Rated	Not Rated	Not Rated	Not Rated	9,400	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
60mm	85mm	13mm	4,500	3,850	Not Rated	Not Rated	Not Rated	Not Rated	8,900	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
65mm	85mm	10mm	2,650	2,550	Not Rated	Not Rated	Not Rated	Not Rated	8,600	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
70mm	90mm	10mm	2,700	2,650	Not Rated	Not Rated	Not Rated	Not Rated	8,100	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
85mm	120mm	18mm	7,150	6,650	Not Rated	Not Rated	Not Rated	Not Rated	6,300	Lubricated	__	-50° to 130°	ABEC-1	00000000	000000
90mm	115mm	13mm	4,250	4,400	Not Rated	Not Rated	Not Rated	Not Rated	6,300	Lubricated	__	-50° to 130°	ABEC-1	00000000	000000
Shielded
10mm	15mm	4mm	190	95	Not Rated	Not Rated	Not Rated	Not Rated	15,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
10mm	19mm	7mm	380	185	Not Rated	Not Rated	Not Rated	Not Rated	37,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
12mm	18mm	4mm	205	115	Not Rated	Not Rated	Not Rated	Not Rated	13,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
15mm	21mm	4mm	210	130	Not Rated	Not Rated	Not Rated	Not Rated	11,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
15mm	24mm	7mm	460	280	Not Rated	Not Rated	Not Rated	Not Rated	28,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
17mm	23mm	4mm	220	145	Not Rated	Not Rated	Not Rated	Not Rated	9,500	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
20mm	27mm	4mm	310	160	Not Rated	Not Rated	Not Rated	Not Rated	8,500	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
20mm	32mm	10mm	900	550	Not Rated	Not Rated	Not Rated	Not Rated	21,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
35mm	47mm	7mm	1,050	850	Not Rated	Not Rated	Not Rated	Not Rated	13,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
40mm	52mm	7mm	1,100	930	Not Rated	Not Rated	Not Rated	Not Rated	12,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
45mm	58mm	7mm	1,350	1,200	Not Rated	Not Rated	Not Rated	Not Rated	11,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
45mm	68mm	12mm	3,150	2,400	Not Rated	Not Rated	Not Rated	Not Rated	9,700	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
50mm	65mm	7mm	1,450	1,350	Not Rated	Not Rated	Not Rated	Not Rated	9,600	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
50mm	72mm	12mm	3,250	2,600	Not Rated	Not Rated	Not Rated	Not Rated	9,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
55mm	72mm	9mm	1,950	1,800	Not Rated	Not Rated	Not Rated	Not Rated	8,700	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
55mm	80mm	13mm	3,700	3,150	Not Rated	Not Rated	Not Rated	Not Rated	8,700	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
60mm	78mm	10mm	2,550	2,350	Not Rated	Not Rated	Not Rated	Not Rated	8,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
60mm	85mm	13mm	4,500	3,850	Not Rated	Not Rated	Not Rated	Not Rated	7,500	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
65mm	85mm	10mm	2,650	2,550	Not Rated	Not Rated	Not Rated	Not Rated	7,300	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
70mm	90mm	10mm	2,700	2,650	Not Rated	Not Rated	Not Rated	Not Rated	6,800	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
75mm	95mm	10mm	2,800	2,900	Not Rated	Not Rated	Not Rated	Not Rated	12,500	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
80mm	100mm	10mm	2,850	2,950	Not Rated	Not Rated	Not Rated	Not Rated	12,700	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
90mm	115mm	13mm	4,250	4,400	Not Rated	Not Rated	Not Rated	Not Rated	5,300	Lubricated	__	-40° to 150°	ABEC-1	00000000	000000
440 Stainless Steel Ring
Open
10mm	15mm	3mm	190	95	Not Rated	Not Rated	Not Rated	Not Rated	15,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
10mm	19mm	5mm	380	185	Not Rated	Not Rated	Not Rated	Not Rated	43,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
10mm	22mm	6mm	600	280	Not Rated	Not Rated	Not Rated	Not Rated	41,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
12mm	18mm	4mm	205	115	Not Rated	Not Rated	Not Rated	Not Rated	15,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
12mm	24mm	6mm	640	320	Not Rated	Not Rated	Not Rated	Not Rated	36,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
15mm	24mm	7mm	460	280	Not Rated	Not Rated	Not Rated	Not Rated	33,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
15mm	28mm	7mm	970	500	Not Rated	Not Rated	Not Rated	Not Rated	30,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
17mm	23mm	4mm	220	145	Not Rated	Not Rated	Not Rated	Not Rated	11,000	Lubricated	__	-50° to 130°	ABEC-1	0000000	00000
20mm	27mm	4mm	310	160	Not Rated	Not Rated	Not Rated	Not Rated	10,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
30mm	37mm	4mm	250	210	Not Rated	Not Rated	Not Rated	Not Rated	7,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
35mm	44mm	5mm	410	360	Not Rated	Not Rated	Not Rated	Not Rated	6,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
35mm	47mm	7mm	1,050	850	Not Rated	Not Rated	Not Rated	Not Rated	16,000	Lubricated	__	-50° to 130°	ABEC-1	00000000	00000
Shielded
10mm	15mm	4mm	190	95	Not Rated	Not Rated	Not Rated	Not Rated	15,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
10mm	19mm	5mm	380	185	Not Rated	Not Rated	Not Rated	Not Rated	37,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
10mm	19mm	7mm	380	185	Not Rated	Not Rated	Not Rated	Not Rated	37,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
10mm	22mm	6mm	600	280	Not Rated	Not Rated	Not Rated	Not Rated	34,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
12mm	18mm	4mm	205	115	Not Rated	Not Rated	Not Rated	Not Rated	13,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
12mm	24mm	6mm	640	320	Not Rated	Not Rated	Not Rated	Not Rated	31,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
15mm	21mm	4mm	210	130	Not Rated	Not Rated	Not Rated	Not Rated	11,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
17mm	23mm	4mm	220	145	Not Rated	Not Rated	Not Rated	Not Rated	9,500	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
17mm	30mm	7mm	1,000	570	Not Rated	Not Rated	Not Rated	Not Rated	23,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
25mm	37mm	7mm	960	650	Not Rated	Not Rated	Not Rated	Not Rated	18,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
25mm	42mm	9mm	1,550	1,000	Not Rated	Not Rated	Not Rated	Not Rated	16,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
30mm	42mm	7mm	1,000	760	Not Rated	Not Rated	Not Rated	Not Rated	15,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000
35mm	47mm	7mm	1,050	850	Not Rated	Not Rated	Not Rated	Not Rated	13,000	Lubricated	__	-40° to 150°	ABEC-1	00000000	00000

Flanged Ultra-Thin Ball Bearings

Open

Shielded

Flanged Bearing

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

440C stainless steel bearings are more corrosion resistant than steel bearings.

Open bearings dissipate heat more efficiently than shielded bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

			Flange		Radial Load Cap., lbs.
For Shaft Diameter, mm	For Housing ID, mm	Width, mm	OD, mm	Thickness, mm	Dynamic	Static	Max. Speed, rpm	Lubrication	Temperature Range, °F	ABEC Rating		Each
Steel Ring
Open
10	15	3	16.5	0.8	190	95	17,000	Lubricated	-50° to 280°	ABEC-1	00000000	000000
10	19	5	21	1	380	185	40,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
10	19	7	21	1.5	380	185	40,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
10	22	6	25	1.5	600	260	37,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
12	18	4	19.5	0.8	205	115	15,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
12	21	5	23	1.1	430	230	36,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
12	21	7	23	1.5	430	230	36,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
12	24	6	26.5	1.5	640	320	33,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
15	21	4	22.5	0.8	210	130	13,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
15	24	5	26	1.1	460	280	31,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
17	23	4	24.5	0.8	220	145	11,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
17	30	7	32.5	1.5	1,000	570	26,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
20	27	4	28.5	0.8	225	160	10,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
20	32	7	35	1.5	900	550	25,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
25	32	4	34	1	245	185	8,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
30	37	4	39	1	250	210	7,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
Shielded
10	15	4	16.5	0.8	190	95	15,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
10	19	5	21	1	380	180	34,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
10	22	6	25	1.5	600	260	31,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
12	18	4	19.5	0.8	200	115	13,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
12	21	5	23	1.1	430	230	30,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
12	21	7	23	1.5	430	230	30,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
12	24	6	26.5	1.5	640	320	28,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
15	21	4	22.5	0.8	210	130	11,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
15	24	5	26	1.1	460	280	26,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
15	24	7	26	1.5	460	280	26,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
15	28	7	30.5	1.5	970	500	24,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
17	23	4	24.5	0.8	220	145	9,500	Lubricated	-50° to 300°	ABEC-1	00000000	00000
17	26	5	28	1.1	500	320	24,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
17	30	7	32.5	1.5	1,000	570	22,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
20	27	4	28.5	0.8	225	160	8,500	Lubricated	-50° to 300°	ABEC-1	00000000	00000
20	32	7	35	1.5	900	550	21,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
20	37	9	40	2	1,400	820	19,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
25	37	7	40	1.5	960	550	18,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
25	42	9	45	2	1,550	1,000	16,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
30	42	7	45	1.5	1,000	770	15,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
30	47	9	50	2	1,600	1,120	14,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
440C Stainless Steel Ring
Open
10	15	3	16.5	0.8	150	75	17,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
10	19	5	21	1	300	150	40,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
15	21	4	22.5	0.8	165	100	13,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
15	28	7	30.5	1.5	770	400	29,000	Lubricated	-50° to 280°	ABEC-1	00000000	00000
Shielded
10	15	4	16.5	0.8	150	75	15,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
10	19	5	21	1	300	150	34,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
10	19	7	21	1.5	300	150	34,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
10	22	6	25	1.5	480	215	31,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
12	18	4	19.5	0.8	165	95	13,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
12	21	5	23	1.1	340	185	30,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
12	24	6	26.5	1.5	510	260	28,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
15	24	5	26	1.1	370	220	26,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000
15	28	7	30.5	1.5	770	400	24,000	Lubricated	-50° to 300°	ABEC-1	00000000	00000

Thin-Wall Press-Fit Drill Bushings

Drill holes close together. These bushings have a thinner wall than typical bushings to fit side by side in a fixture plate. Also known as jig bushings, they precisely guide bits and other cutting tools to ensure holes and cuts are consistent from part to part. You can also use them as spacers, shims, and machinery bushings. Made of hardened, ground steel, they resist wear and last for many cycles without needing to be replaced. Since their wall is so thin, these bushings may be slightly oval when you receive them but will conform to the shape of your hole.

Press into place with a manual or hydraulic press. Since these bushings are sized slightly larger than the hole for an extremely tight fit, they’ll stay put permanently. These are ANSI Type P bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.

			Tolerance							Each
OD	Lg.	For Drill Bit Size	ID	OD	Lg.	Drill Bushing Type	Material	Hardness		1-5	6-11	12-Up
0.1875" ID
1/4"	1/2"	3/16"	0.0001" to 0.0004"	0.0013" to 0.0016"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	000000	00000	00000
0.1935" ID
1/4"	1/2"	No. 10	0.0001" to 0.0004"	0.0013" to 0.0016"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	00000	0000	0000
0.2188" ID
9/32"	1/2"	7/32"	0.0001" to 0.0004"	0.0013" to 0.0016"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.257" ID
5/16"	1/2"	F	0.0001" to 0.0004"	0.0013" to 0.0016"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.2813" ID
11/32"	1/2"	9/32"	0.0001" to 0.0005"	0.0013" to 0.0016"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.3125" ID
3/8"	5/8"	5/16"	0.0001" to 0.0005"	0.0013" to 0.0016"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.375" ID
7/16"	3/4"	3/8"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.377" ID
7/16"	3/4"	V	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.3906" ID
15/32"	3/4"	25/64"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.4063" ID
1/2"	1"	13/32"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.4375" ID
1/2"	1"	7/16"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.5" ID
9/16"	1"	1/2"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	0000	0000	0000
0.5156" ID
5/8"	1"	33/64"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	00000	0000	0000
0.5313" ID
5/8"	1"	17/32"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	00000	0000	0000
0.5625" ID
5/8"	1"	9/16"	0.0001" to 0.0005"	0.0014" to 0.0017"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	00000	0000	0000
0.75" ID
7/8"	1 1/2"	3/4"	0.0001" to 0.0005"	0.0015" to 0.0018"	-0.01" to 0.01"	P	Steel	Rockwell C61	0000000	00000	00000	0000