Connect to a compatible ratchet or electric threader to cut external pipe and conduit threads.

These machines thread faster than the Ridgid 300 and include a self-lubricating die head and automatic chuck.

Carry this pipe and conduit threader to your work site.

Add or replace parts such as drive adapters, die sets, and drive bars for the Ridgid Large Size Pipe and Conduit Threader Adapter.

Use these dies with Ridgid pipe and conduit threader die heads on Ridgid pipe and conduit threaders.

Cut threads in PVC with the specially designed teeth on these high-speed steel dies.

Use these dies to create external threads on bolts, studs, and rods.

Create external pipe and conduit threads.

Repair rusted and damaged left-hand screw threads. These dies are hex shaped for use with conventional wrenches.

A smaller width than standard hex dies lets you repair threads in tight spaces.

Renew rusted and damaged pipe and conduit threads.

Repair the broad, square threads on Acme threaded studs and rods. These dies are for general purpose Acme threads with a Class 2G thread fit.

Slide over the end of threaded rod, pipe, and conduit to the area where threads are damaged, then tighten and rotate to repair threads.

Four or six files and four handles are included in these sets.

Restore any size screw, pipe, and conduit threads.

Use these wrenches to turn hex-shaped dies by hand. They're also known as die stocks.

Use the extra-long shank to thread deep and hard-to-reach holes.

Tap threads for left-hand threaded fasteners.

These taps cut left-hand threads while keeping chips clear.

Clear chips while tapping deep and hard-to-reach holes. These taps have an extra-long shank for extended reach.

Drill holes and cut threads without switching tools.

Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Also known as cold-forming and fluteless taps, these press threads into material without cutting it, so no chips are created.

These taps are made of cobalt steel for higher strength and wear resistance than standard taps. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.

A high helix angle provides the cutting strength needed to tap threads in titanium. These cobalt steel taps have an open flute design that keeps chips clear, so they don't need to be reversed to prevent buildup.

Tap left-hand threads for pipe and conduit.

Use these carbon steel taps for thread repair and occasional tapping of pipe and conduit. They can tap threads into most metal and plastic, but they have a shorter tool life than standard taps.

Also known as short-projection taps, these have fewer tapered threads at the tip than standard pipe taps, so you don't have to drive them as deep to produce full threads.

The spiral flutes on these pipe and conduit taps keep chips clear by drawing them back out of the hole, so there's no need to reverse the tap while cutting threads.

The cutting teeth are shaped to cut smooth threads in soft pipe and conduit material.

Connect a tap to these wrenches for occasional or light-duty hand tapping. All have a T-handle design, so they're more compact than straight-handle tap wrenches but provide less leverage.

For occasional or light-duty hand tapping, connect a tap to these wrenches. They have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.

Sets include multiple holders for use with different tap sizes. These holders work like sockets to connect taps to ratchet wrenches.

With replaceable dies, these long-lasting tools can repair both screw threads and pipe and conduit threads. Use them for holes with an ID from 3/4" to 6".

Restore six internal thread sizes with one tool.

Use a single set for many sizes of internal and external threads. All sets include tap and die wrenches.

Repair screw threads in a wide range of sizes.

For start-to-finish tapping of left-hand threads, these sets include one taper-, one plug-, and one bottoming-chamfer tap.

Create pipe and conduit threads in a range of hole diameters.

Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Clamp these dies around your workpiece, so you can start thread repair anywhere along the length of a bolt, stud, or rod.

Cut several sizes of external screw threads.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

Place the tip of these tools into an insert and strike a light blow to the tool’s head. Then turn the tools counterclockwise with pressure to extract the insert.

Place the tip of these tools into an insert and strike them with a hammer to drive the keys into the material. They’re compatible with Keensert® inserts.

Screw an insert onto these tools and drive them a quarter to half-turn below the material’s surface.

Thread these tools into an insert and turn counterclockwise to extract.

Strike these tools with a hammer or mallet to press threaded inserts into composites.

Use these installation bits with power drills and drill presses as an alternative to a screwdriver for fast installation.

Attach these installation tips to a soldering iron. The tips transfer heat from the soldering iron to the insert, softening the surrounding plastic. When the plastic cools, it solidifies around the insert to keep it secure.

Also known as tap chucks, these fit into machines that have a Morse taper spindle.

Use to attach taps to Procunier auto-reversing tap holders.

Cut threads in plastic and most metal with these high-speed steel tools.

The carbide tip brazed onto the ground steel shanks of these tools is more wear resistant than high-speed steel.

Reduce tooling setup time—install the holder once and alternate between applications by switching out the bit.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

A carbide insert comes installed on these tools.

Install these inserts into a compatible holder to cut external or internal threads on a workpiece.