The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Protect externally threaded components from contaminants during fabrication and storage.

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

Similar to a shower cap, these caps have an elastic band that allows them to stretch and cover a variety of shapes in a range of sizes.

Conceal and protect the tops of socket head or button head screws.

A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.

Pull the two built-in rings to quickly remove these plugs. All are tapered to fit a range of hole diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

With excellent torsional strength, this sleeving withstands the extreme twisting found in robotics. It has impact strength similar to steel yet is lighter than most other sleeving materials. Stretch it to fit over items for easy installation; it tightens around its contents for a secure fit.

Use this braided copper sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.