About Nuts, Materials, and Finishes
More
Threaded Rod Eye Nuts
Add an eye nut to threaded rod to hang the rod from rings, hooks, and hangers.
Socket eye nuts hang threaded rod from center-mount beam clamps. A cutout on the side of the nut makes it easier to see thread engagement after the nut is installed.
Turnbuckle eye nuts have a swivel eye that allows height adjustment after installation.
Note: Capacity is for the eye nut only. Mounting surface and fastening hardware will affect the ultimate capacity.
For technical drawings and 3-D models, click on a part number.
| For Thread Size | Threaded Hole Dp. | Cap., lbs. | Eye Dia. | Ctr. Ht. | Wd. | Ht. | Threaded Rod Included | Fasteners Required | Each | |
Iron | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Eye Nut | ||||||||||
1/4"-20 | 3/8" | 225 | 1/4" | 1" | 7/8" | 1 3/8" | No | No | 00000000 | 00000 |
| 3/8"-16 | 1/2" | 600 | 1/4" | 1 1/4" | 1 5/16" | 1 13/16" | No | No | 00000000 | 0000 |
| 1/2"-13 | 5/8" | 1,125 | 1/4" | 1 3/8" | 1 5/16" | 1 7/8" | No | No | 0000000 | 0000 |
| 5/8"-11 | 3/4" | 1,800 | 3/8" | 1 9/16" | 1 9/16" | 2 1/4" | No | No | 0000000 | 0000 |
| 3/4"-10 | 13/16" | 2,700 | 1/2" | 1 7/8" | 1 15/16" | 2 7/16" | No | No | 0000000 | 0000 |
Socket Eye Nut | ||||||||||
| 3/8"-16 | 13/16" | 600 | 1/2" | 2" | 1" | 2 1/2" | No | No | 00000000 | 0000 |
| 1/2"-13 | 15/16" | 1,125 | 1/2" | 2 1/4" | 1 1/4" | 2 3/4" | No | No | 00000000 | 0000 |
| 5/8"-11 | 1" | 1,550 | 1/2" | 2 3/8" | 1 1/4" | 3" | No | No | 00000000 | 00000 |
| 3/4"-10 | 1 3/16" | 2,100 | 1/2" | 2 7/8" | 1 1/2" | 3 1/2" | No | No | 00000000 | 00000 |
Turnbuckle Eye Nut | ||||||||||
| 1/4"-20 | 1 1/4" | 225 | 7/32" | 2 1/2" | 1" | 2 7/8" | No | No | 000000 | 00000 |
| 3/8"-16 | 1 7/8" | 725 | 13/32" | 3 7/8" | 1 1/2" | 4 3/8" | No | No | 000000 | 00000 |
| 1/2"-13 | 1 13/16" | 725 | 13/32" | 3 7/8" | 1 1/2" | 4 3/8" | No | No | 000000 | 00000 |
| 5/8"-11 | 2 5/16" | 725 | 1/2" | 4 7/8" | 2" | 5 1/2" | No | No | 000000 | 00000 |
Rod End Nuts
Attach these nuts to rods, pipes, and tubes to make pivoting and hinge movements where misalignment is not a concern. They’re often used to control air- and hydraulic-powered arms as well as other components in power transmission systems. Made of zinc-plated steel, these nuts resist being dislodged. They’re heavy, however, and may corrode over time as the plating wears down.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID, mm | Overall Diameter, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength | Material | Each | |
Right-Hand Threaded Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| M3.5 × 0.6 mm | 4.1 | 8 | 11 | 6 | Not Rated | Zinc-Plated Steel | 0000000 | 00000 |
| M5 × 0.8 mm | 6.1 | 10 | 16 | 8 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| M8 × 1.25 mm | 8.1 | 14 | 19 | 11 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| M10 × 1.5 mm | 8.1 | 18 | 27 | 12 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| Shank Thread Size | ID, mm | Overall Width, mm | Overall Thickness, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength | Material | Each | |
Right-Hand Threaded Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| M5 × 0.8 mm | 8.1 | 15 | 10 | 16 | 8 | Not Rated | Zinc-Plated Steel | 0000000 | 00000 |
Corrosion-Resistant Rod End Nuts
Made of stainless steel for excellent corrosion resistance, these nuts make pivoting and hinge movements where misalignment is not a concern. Attach them to rods, pipes, and tubes to control air- and hydraulic-powered arms as well as other components in power transmission systems. They have a rubber bushing to reduce noise and vibration.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID, mm | Overall Diameter, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength | Material | Each | |
Right-Hand Threaded Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
Round | ||||||||
| M5 × 0.8 mm | 6.1 | 10 | 16 | 8 | Not Rated | 303 Stainless Steel | 0000000 | 00000 |
| M8 × 1.25 mm | 8.1 | 14 | 19 | 11 | Not Rated | 303 Stainless Steel | 0000000 | 00000 |
| M10 × 1.5 mm | 8.1 | 18 | 27 | 12 | Not Rated | 303 Stainless Steel | 0000000 | 00000 |