Brake/Lock Type Brake/Lock Type |
|---|
 | -spec--67dceef610c1603460576-p9@1x_637390425091057798.png?ver=imagenotfound) |
| Wheel Brake | Wheel Brake and Swivel Lock (Total Lock) |
Mount Height Mount Height |
|---|
Capacity per Caster Capacity per Caster |
|---|
|
Wheel Type Wheel Type |
|---|
 |  |
| Solid | Tread on Core |
Wheel Bearing Type Wheel Bearing Type |
|---|
|
Hardness Hardness |
|---|
|
Frame Finish Frame Finish |
|---|
|
Swivel Bearing Type Swivel Bearing Type |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Brake Location Brake Location |
|---|
|
About Casters and Wheels
More
Threaded-Stem Casters with Rubber Wheels
Swivel
Dual-Wheel Swivel
Swivel with Brake
Dual-Wheel Swivel with Brake
Swivel with Total Lock
Install these casters into a threaded hole. Dual-wheel casters provide better load distribution and easier turning than single-wheel casters.
Tread-on-core wheels have a core that is harder than the tread, balancing strength with cushioning.
Soft and firm rubber wheels are shock absorbing and provide good traction on rough surfaces. Hard rubber wheels are impact resistant and roll easily on smooth surfaces, but can be damaging to floors.
Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal. Casters with total lock brake the wheel and lock the swivel with one press of the foot pedal.
Sleeve and flanged-sleeve wheel bearings prevent wear to the wheel bore but don't roll as easily as other bearings. Roller wheel bearings provide smoother rolling than sleeve and flanged-sleeve bearings. Ball wheel bearings are the easiest to roll.
Ball swivel bearings provide smooth swiveling. Double-ball swivel bearings swivel more smoothly than ball bearings.
Shielded bearings protect the bearing from dust and debris. Sealed bearings are completely sealed for the best protection against dust and debris.
Wheel | Swivel Bearing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | No. of | Mount Ht. | Cap. per Caster, lbs. | Hardness | Stem Lg. | Wheel Bearing Type | Type | Seal Type | Each | |
Swivel  | |||||||||||
5/16"-18 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 2" | 7/8" | 1 | 2 11/16" | 90 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 2" | 7/8" | 2 | 2 3/4" | 150 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 2 1/2" | 3/4" | 1 | 3" | 90 | Durometer 80A | 1" | Sleeve | Double Ball | Open | 0000000 | 0000 |
Black Solid Wheels—Firm | |||||||||||
| 2" | 7/8" | 1 | 2 11/16" | 125 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 0000 |
| 2" | 7/8" | 2 | 2 3/4" | 200 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Hard | |||||||||||
| 2 1/2" | 3/4" | 1 | 3" | 100 | Durometer 80D | 1" | Sleeve | Double Ball | Open | 0000000 | 0000 |
3/8"-16 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 2 1/2" | 3/4" | 1 | 3" | 90 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 0000000 | 0000 |
| 2 1/2" | 7/8" | 2 | 3 7/16" | 200 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Firm | |||||||||||
| 2" | 7/8" | 1 | 2 11/16" | 125 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 0000 |
| 2" | 7/8" | 2 | 2 3/4" | 200 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 13/16" | 1 | 3 11/16" | 150 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 13/16" | 2 | 3 11/16" | 250 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 31/32" | 1 | 4 5/8" | 135 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 31/32" | 2 | 4 11/16" | 240 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 31/32" | 1 | 5 5/8" | 145 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 31/32" | 2 | 5 5/8" | 250 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Hard | |||||||||||
| 2 1/2" | 3/4" | 1 | 3" | 100 | Durometer 80D | 1 1/2" | Sleeve | Double Ball | Open | 0000000 | 0000 |
| 3" | 3/4" | 1 | 3 9/16" | 120 | Durometer 80D | 1 1/2" | Sleeve | Double Ball | Open | 0000000 | 0000 |
1/2"-13 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 3" | 13/16" | 1 | 3 11/16" | 100 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 13/16" | 2 | 3 11/16" | 200 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 1 1/4" | 1 | 3 9/16" | 170 | Durometer 80A | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 1 | 4 3/4" | 200 | Durometer 80A | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 2 | 4 11/16" | 330 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/4" | 1 | 5 13/16" | 210 | Durometer 80A | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 2 | 5 5/8" | 340 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Firm | |||||||||||
| 3" | 13/16" | 1 | 3 11/16" | 150 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 13/16" | 2 | 3 11/16" | 250 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 1 3/8" | 1 | 3 7/8" | 210 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 1 3/8" | 2 | 3 1/2" | 340 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 1 1/4" | 1 | 4 7/8" | 255 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 1 1/4" | 2 | 4 11/16" | 350 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/4" | 1 | 6 1/16" | 255 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/4" | 2 | 5 3/4" | 360 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Hard | |||||||||||
| 3" | 1 1/4" | 1 | 3 9/16" | 270 | Durometer 80D | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 1 | 4 3/4" | 280 | Durometer 80D | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 1 | 5 13/16" | 290 | Durometer 80D | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
Black Tread-on-Core Wheels—Soft | |||||||||||
| 6" | 1 1/4" | 1 | 7 1/8" | 150 | Durometer 70A | 1 1/2" | Ball | Double Ball | Shielded | 0000000 | 00000 |
Nonmarking Blue Tread-on-Core Wheels—Soft | |||||||||||
| 5" | 1 1/4" | 1 | 5 7/8" | 250 | Durometer 75A | 7/8" | Ball | Ball | Sealed | 00000000 | 00000 |
Nonmarking Gray Tread-on-Core Wheels—Soft | |||||||||||
| 3 1/2" | 1 1/4" | 1 | 4 9/16" | 250 | Durometer 65A | 1 1/2" | Ball | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 1 | 5" | 300 | Durometer 65A | 1 1/2" | Ball | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 1 | 6 1/16" | 320 | Durometer 65A | 1 1/2" | Ball | Double Ball | Open | 0000000 | 00000 |
Nonmarking Gray Tread-on-Core Wheels—Firm | |||||||||||
| 2" | 7/8" | 2 | 2 3/4" | 180 | Durometer 90A | 1 1/2" | Flanged Sleeve | Double Ball | Open | 00000000 | 0000 |
3/4"-10 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 4" | 1 1/2" | 1 | 5 3/8" | 250 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 2" | 2 | 5 1/2" | 600 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/2" | 1 | 6 5/16" | 270 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 2" | 2 | 6 1/2" | 620 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 1 1/2" | 1 | 7 7/16" | 290 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 2" | 2 | 7 3/4" | 700 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Firm | |||||||||||
| 4" | 2" | 2 | 5 1/2" | 680 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 2" | 2 | 6 1/2" | 700 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 2" | 1 | 7 1/2" | 500 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 2" | 2 | 7 3/4" | 800 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Swivel with Brake | |||||||||||
5/16"-18 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 2" | 7/8" | 1 | 2 11/16" | 90 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 2" | 7/8" | 2 | 2 3/4" | 150 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 000000000 | 00000 |
| 2 1/2" | 3/4" | 1 | 3" | 90 | Durometer 80A | 1" | Sleeve | Double Ball | Open | 0000000 | 0000 |
Black Solid Wheels—Firm | |||||||||||
| 2" | 7/8" | 1 | 2 11/16" | 125 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 2" | 7/8" | 2 | 2 3/4" | 200 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 000000000 | 00000 |
3/8"-16 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 2 1/2" | 3/4" | 1 | 3" | 90 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 0000000 | 0000 |
| 2 1/2" | 7/8" | 2 | 3 7/16" | 200 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Firm | |||||||||||
| 2" | 7/8" | 1 | 2 11/16" | 125 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 2" | 7/8" | 2 | 2 3/4" | 200 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 000000000 | 00000 |
| 3" | 13/16" | 1 | 3 11/16" | 150 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 13/16" | 2 | 3 11/16" | 250 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 000000000 | 00000 |
| 4" | 31/32" | 1 | 4 5/8" | 135 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 31/32" | 2 | 4 11/16" | 240 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 31/32" | 1 | 5 5/8" | 145 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 31/32" | 2 | 5 5/8" | 250 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Hard | |||||||||||
| 2 1/2" | 3/4" | 1 | 3" | 100 | Durometer 80D | 1 1/2" | Sleeve | Double Ball | Open | 0000000 | 0000 |
| 3" | 3/4" | 1 | 3 9/16" | 120 | Durometer 80D | 1 1/2" | Sleeve | Double Ball | Open | 0000000 | 00000 |
1/2"-13 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 3" | 13/16" | 1 | 3 11/16" | 100 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 13/16" | 2 | 3 11/16" | 200 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 000000000 | 00000 |
| 3" | 1 1/4" | 1 | 3 9/16" | 170 | Durometer 80A | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 1 | 4 3/4" | 200 | Durometer 80A | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 2 | 4 11/16" | 330 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/4" | 1 | 5 13/16" | 210 | Durometer 80A | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 2 | 5 5/8" | 340 | Durometer 80A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Firm | |||||||||||
| 3" | 13/16" | 1 | 3 11/16" | 150 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 13/16" | 2 | 3 11/16" | 250 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 000000000 | 00000 |
| 3" | 1 3/8" | 1 | 3 7/8" | 210 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 3" | 1 3/8" | 2 | 3 1/2" | 340 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 1 1/4" | 1 | 4 7/8" | 255 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 1 1/4" | 2 | 5" | 350 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/4" | 1 | 6 1/16" | 255 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/4" | 2 | 5 3/4" | 360 | Durometer 90A | 1 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Hard | |||||||||||
| 3" | 1 1/4" | 1 | 3 9/16" | 270 | Durometer 80D | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 1 | 4 3/4" | 280 | Durometer 80D | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 1 | 5 13/16" | 290 | Durometer 80D | 1 1/2" | Roller | Double Ball | Open | 0000000 | 00000 |
Black Tread-on-Core Wheels—Soft | |||||||||||
| 6" | 1 1/4" | 1 | 7 1/8" | 150 | Durometer 70A | 1 1/2" | Ball | Double Ball | Shielded | 0000000 | 00000 |
Nonmarking Gray Tread-on-Core Wheels—Firm | |||||||||||
| 2" | 7/8" | 2 | 2 3/4" | 180 | Durometer 90A | 1 1/2" | Flanged Sleeve | Double Ball | Open | 00000000 | 0000 |
3/4"-10 Stem Thread Size | |||||||||||
Black Solid Wheels—Soft | |||||||||||
| 4" | 1 1/2" | 1 | 5 3/8" | 250 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 4" | 2" | 2 | 5 1/2" | 600 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 1 1/2" | 1 | 6 5/16" | 270 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 2" | 2 | 6 1/2" | 620 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 1 1/2" | 1 | 7 7/16" | 290 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 2" | 2 | 7 3/4" | 700 | Durometer 80A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Black Solid Wheels—Firm | |||||||||||
| 4" | 2" | 2 | 5 1/2" | 680 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 5" | 2" | 2 | 6 1/2" | 700 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 2" | 1 | 7 1/2" | 500 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
| 6" | 2" | 2 | 7 3/4" | 800 | Durometer 90A | 2 1/2" | Sleeve | Double Ball | Open | 00000000 | 00000 |
Swivel with Total Lock | |||||||||||
1/2"-13 Stem Thread Size | |||||||||||
Nonmarking Gray Tread-on-Core Wheels—Soft | |||||||||||
| 3 1/2" | 1 1/4" | 1 | 4 9/16" | 250 | Durometer 65A | 1 1/2" | Ball | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 1 | 5" | 300 | Durometer 65A | 1 1/2" | Ball | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 1 | 6 1/16" | 320 | Durometer 65A | 1 1/2" | Ball | Double Ball | Open | 0000000 | 00000 |
Threaded-Stem Casters with Polyurethane Wheels
Swivel
Swivel with Total Lock
Use these general purpose casters in a variety of applications. Their polyurethane wheels are as abrasion resistant as plastic but are not as hard. They can be used on smooth and rough floors and in areas with debris.
Tread-on-core wheels have a polypropylene core that is harder than the tread, balancing strength with cushioning.
Casters with total lock brake the wheel and lock the swivel with one press of the foot pedal. Ball wheel bearings are the easiest to roll.
Ball swivel bearings provide smooth swiveling. Double-ball swivel bearings have the smoothest swivel. Sealed bearings are completely sealed for the best protection against dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Swivel Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Stem Lg. | Wheel Bearing Type | Frame Material | Type | Seal Type | Each | |
Swivel | ||||||||||
1/2"-13 Stem Thread Size | ||||||||||
Nonmarking Blue Tread-on-Core Wheels—Hard | ||||||||||
| 5" | 1 1/4" | 5 7/8" | 250 | 7/8" | Ball | Zinc-Plated Steel | Ball | Sealed | 00000000 | 000000 |
Nonmarking Red Tread-on-Core Wheels—Hard | ||||||||||
| 2 1/2" | 1 1/4" | 3 3/4" | 250 | 1 1/2" | Ball | Zinc-Plated Steel | Double Ball | Open | 0000000 | 00000 |
| 3 1/2" | 1 1/4" | 4 9/16" | 250 | 1 1/2" | Ball | Zinc-Plated Steel | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 5" | 270 | 1 1/2" | Ball | Zinc-Plated Steel | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 6 1/16" | 300 | 1 1/2" | Ball | Zinc-Plated Steel | Double Ball | Open | 0000000 | 00000 |
Swivel with Total Lock | ||||||||||
1/2"-13 Stem Thread Size | ||||||||||
Nonmarking Red Tread-on-Core Wheels—Hard | ||||||||||
| 3 1/2" | 1 1/4" | 4 9/16" | 250 | 1 1/2" | Ball | Zinc-Plated Steel | Double Ball | Open | 0000000 | 00000 |
| 4" | 1 1/4" | 5" | 270 | 1 1/2" | Ball | Zinc-Plated Steel | Double Ball | Open | 0000000 | 00000 |
| 5" | 1 1/4" | 6 1/16" | 300 | 1 1/2" | Ball | Zinc-Plated Steel | Double Ball | Open | 0000000 | 00000 |
Threaded-Stem Casters with Polypropylene Wheels
Dual-Wheel Swivel
Dual-Wheel Swivel with Brake
Use these general purpose casters in a variety of applications. The lightweight polypropylene wheels on these casters are an economical option for smooth surfaces.
Dual-wheel casters provide better load distribution and easier turning than single-wheel casters.
Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal. Flanged-sleeve wheel bearings prevent wear to the wheel bore but don't roll as easily as other bearings.
Double-ball bearings in the swivel provide the smoothest swiveling.
For technical drawings and 3-D models, click on a part number.
Wheel | Wheel Bearing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | No. of | Mount Ht. | Cap. per Caster, lbs. | Stem Lg. | Type | Seal Type | Frame Material | Swivel Bearing Seal Type | Each | |
Swivel | |||||||||||
3/8"-16 Stem Thread Size | |||||||||||
Nonmarking Black Solid Wheels—Hard | |||||||||||
| 2" | 7/8" | 2 | 2 3/4" | 220 | 1 1/2" | Flanged Sleeve | Open | Zinc-Plated Steel | Open | 00000000 | 00000 |
1/2"-13 Stem Thread Size | |||||||||||
Nonmarking Black Solid Wheels—Hard | |||||||||||
| 2" | 7/8" | 2 | 2 3/4" | 220 | 1 1/2" | Flanged Sleeve | Open | Zinc-Plated Steel | Open | 00000000 | 0000 |
Swivel with Brake | |||||||||||
3/8"-16 Stem Thread Size | |||||||||||
Nonmarking Black Solid Wheels—Hard | |||||||||||
| 2" | 7/8" | 2 | 2 3/4" | 220 | 1 1/2" | Flanged Sleeve | Open | Zinc-Plated Steel | Open | 00000000 | 0000 |
1/2"-13 Stem Thread Size | |||||||||||
Nonmarking Black Solid Wheels—Hard | |||||||||||
| 2" | 7/8" | 2 | 2 3/4" | 220 | 1 1/2" | Flanged Sleeve | Open | Zinc-Plated Steel | Open | 00000000 | 0000 |
Static-Control Threaded-Stem Casters
Swivel
Swivel with Brake
Rubber wheels on these casters dissipate static to protect static sensitive electronic equipment from electrostatic discharge. The soft wheels are shock absorbing and provide good traction on rough surfaces. Roller bearings in the wheel provide smooth rolling. Casters have double-ball swivel bearings for the smoothest swiveling.
Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
For technical drawings and 3-D models, click on a part number.
Wheel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Surface Resistivity, ohms/sq. | Hardness | Stem Lg. | Frame Material | Specifications Met | Each | |
Swivel | ||||||||||
3/8"-16 Stem Thread Size | ||||||||||
Black Solid Wheels—Soft | ||||||||||
| 2 1/2" | 15/16" | 3" | 90 | 106 | Durometer 80A | 1 1/2" | Nickel-Plated Steel | BIFMA Standards | 0000000 | 00000 |
| 3" | 15/16" | 3 9/16" | 100 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 0000 |
1/2"-13 Stem Thread Size | ||||||||||
Black Solid Wheels—Soft | ||||||||||
| 3" | 1 1/4" | 3 9/16" | 175 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 00000 |
| 4" | 1 1/4" | 4 3/4" | 200 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 00000 |
| 5" | 1 1/4" | 5 13/16" | 210 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 00000 |
Swivel with Brake | ||||||||||
3/8"-16 Stem Thread Size | ||||||||||
Black Solid Wheels—Soft | ||||||||||
| 2 1/2" | 15/16" | 3" | 90 | 106 | Durometer 80A | 1 1/2" | Nickel-Plated Steel | BIFMA Standards | 0000000 | 0000 |
| 3" | 15/16" | 3 9/16" | 100 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 00000 |
1/2"-13 Stem Thread Size | ||||||||||
Black Solid Wheels—Soft | ||||||||||
| 3" | 1 1/4" | 3 9/16" | 175 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 00000 |
| 4" | 1 1/4" | 4 3/4" | 200 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 00000 |
| 5" | 1 1/4" | 5 13/16" | 210 | 106 | Durometer 80A | 1 1/2" | Zinc-Plated Steel | BIFMA Standards | 0000000 | 00000 |