Thread Size Thread Size |
|---|
Length Length |
|---|
Head Width Head Width |
|---|
|
|
|
Head Height Head Height |
|---|
|
|
|
Material Material |
|---|
|
Thread Length Thread Length |
|---|
For Slot Width For Slot Width |
|---|
|
|
|
Mount Type Mount Type |
|---|
 |  |
| Threaded Stud | Threaded Hole |
Finish Finish |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (DefenseAcquisition Regulations Supplement) |
|---|
Stud Material Stud Material |
|---|
|
Minimum Tensile Strength Minimum Tensile Strength |
|---|
|
|
Minimum Hardness Minimum Hardness |
|---|
|
About Hex Head Screws and Bolts
More
T-Bolts
Steel
Black-Oxide Steel
Zinc-Plated Steel
Also known as tank-strap bolts, these T-bolts are commonly used with a band clamp or a strap to hold fuel tanks and other objects in place. The large T-shaped head provides a secure grip for steady tightening. Length is measured from the top of the head.
Match the thread spacing of mating components. Coarse threads are the industry standard; choose these screws if you don’t know the threads per inch. Fine threads are closely spaced to prevent loosening from vibration.
Steel T-bolts without a finish are ready to be painted or finished.
Black-oxide steel T-bolts are mildly corrosion resistant in dry environments.
Zinc-plated steel T-bolts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Lg. | Thread Spacing | Wd. | Thick. | Tensile Strength, psi | Each | |
Steel | |||||||||
| 3/8"-16 | 2 15/16" | Partially Threaded | 1 1/2" | Coarse | 1 3/4" | 3/8" | 120,000 | 000000000 | 00000 |
| 1/2"-13 | 3 3/4" | Partially Threaded | 2 1/2" | Coarse | 2" | 1/2" | 120,000 | 000000000 | 00000 |
| 1/2"-20 | 3 3/4" | Partially Threaded | 2 1/2" | Fine | 2" | 1/2" | 120,000 | 000000000 | 00000 |
Black-Oxide Steel | |||||||||
| 1/4"-20 | 2 5/8" | Partially Threaded | 1 1/2" | Coarse | 1 1/4" | 1/4" | Not Rated | 000000000 | 00000 |
| 3/8"-16 | 3 11/16" | Partially Threaded | 1 1/2" | Coarse | 2" | 1/2" | 120,000 | 000000000 | 00000 |
| 3/8"-16 | 5 3/16" | Partially Threaded | 4" | Coarse | 1 3/4" | 3/8" | Not Rated | 000000000 | 00000 |
| 3/8"-24 | 3 11/16" | Partially Threaded | 1 1/2" | Fine | 2" | 1/2" | 120,000 | 000000000 | 00000 |
| 1/2"-13 | 6 1/4" | Partially Threaded | 5" | Coarse | 3" | 1/2" | Not Rated | 000000000 | 00000 |
Zinc-Plated Steel | |||||||||
| 3/8"-16 | 2 15/16" | Partially Threaded | 1 1/2" | Coarse | 1 3/4" | 3/8" | 120,000 | 000000000 | 0000 |
| 3/8"-16 | 3 11/16" | Partially Threaded | 1 1/2" | Coarse | 2" | 3/8" | 120,000 | 000000000 | 0000 |
| 3/8"-24 | 3 11/16" | Partially Threaded | 1 1/2" | Fine | 2" | 1/2" | 120,000 | 000000000 | 00000 |
| 1/2"-13 | 3 3/4" | Partially Threaded | 2 1/2" | Coarse | 2" | 1/2" | 120,000 | 000000000 | 00000 |
| 1/2"-20 | 3 3/4" | Partially Threaded | 2 1/2" | Fine | 2" | 1/2" | 120,000 | 000000000 | 00000 |
T-Bolts with Collar
Also known as clamping pins, these bolts have a collar that slides along the shaft and can be welded in place to hold work and prevent over torquing. The large T-shaped head provides a secure grip for steady tightening. The black-oxide finish provides corrosion resistance in dry environments. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Lg. | Thread Spacing | Wd. | Thick. | Tensile Strength, psi | Each | |
Black-Oxide Steel | |||||||||
| 10-24 | 3 1/4" | Partially Threaded | 3/4" | Coarse | 1 1/2" | 1/4" | 70,000 | 000000000 | 00000 |
| 1/4"-20 | 4 3/8" | Partially Threaded | 3/4" | Coarse | 2 1/2" | 3/8" | 70,000 | 000000000 | 00000 |
| 5/16"-18 | 4 7/16" | Partially Threaded | 3/4" | Coarse | 3" | 7/16" | 70,000 | 000000000 | 00000 |
| 3/8"-16 | 5" | Partially Threaded | 3/4" | Coarse | 3 1/2" | 1/2" | 70,000 | 000000000 | 00000 |
| 1/2"-13 | 5 5/8" | Partially Threaded | 3/4" | Coarse | 3 1/2" | 5/8" | 70,000 | 000000000 | 00000 |
| 1/2"-13 | 7 5/8" | Partially Threaded | 3/4" | Coarse | 3 1/2" | 5/8" | 70,000 | 000000000 | 00000 |
| 5/8"-11 | 6 3/8" | Partially Threaded | 3/4" | Coarse | 3 1/2" | 7/8" | 70,000 | 000000000 | 00000 |
| 3/4"-10 | 6 7/8" | Partially Threaded | 3/4" | Coarse | 3 1/2" | 7/8" | 70,000 | 000000000 | 00000 |
Threaded-Stud Knobs
7
8
9
10
11
Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance. Polypropylene has good impact resistance.
For technical drawings and 3-D models, click on a part number.
Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch | Stud Lg. | Wd. | Ht. | Dia. | Ht. | Stud Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 7—Two Arm Grip | |||||||||||
Black Phenolic Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 1 1/8" | 5/8" | 1/2" | 1/8" | Steel | -30° to 400° | 0000000 | 00000 | 00000 |
| 1/4"-20 | __ | 9/16" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 3/4" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 3/4" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2" | 5/8" | 3/4" | 1/2" | Steel | -30° to 400° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 29mm | 19mm | 13mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 51mm | 29mm | 19mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 30mm | 29mm | 19mm | 13mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 30mm | 51mm | 29mm | 19mm | __ | Steel | -20° to 380° | 00000000 | 0000 | 0000 |
Black Nylon Plastic | |||||||||||
| 1/4"-20 | __ | 1" | 1 1/8" | 9/16" | 1/2" | 1/8" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 3 1/2" | 7/8" | 15/16" | 1/4" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Stainless Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2 1/2" | 5/8" | 3/4" | 1/2" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 3 1/2" | 7/8" | 15/16" | 1/4" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
Black Polypropylene Plastic | |||||||||||
| 5/16"-18 | __ | 1/2" | 1 1/2" | 5/8" | 3/4" | 1/8" | Steel | -15° to 125° | 0000000 | 0000 | 0000 |
| 1/2"-13 | __ | 1" | 3 1/2" | 7/8" | 15/16" | 1/4" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Style 8—Two Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Stainless Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 2 1/4" | 3/4" | 3/4" | 11/16" | Stainless Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 1/2" | 2 1/4" | 3/4" | 3/4" | 11/16" | Stainless Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Style 9—Two Arm Grip | |||||||||||
Black Plastic | |||||||||||
| M6 | 1mm | 15mm | 35mm | 10mm | 15.5mm | 8mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 15mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 35mm | 10mm | 15.5mm | 8mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 30mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 15mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 30mm | 45mm | 13mm | 20mm | 11mm | Steel | -40° to 230° | 00000000 | 0000 | 0000 |
Style 10—Two Arm Grip | |||||||||||
Black Nylon Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 3" | 3/8" | 3/4" | 13/16" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 3" | 3/8" | 3/4" | 13/16" | Steel | -15° to 150° | 00000000 | 0000 | 0000 |
Style 11—Two Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| 10-32 | __ | 3/4" | 1 1/4" | 3/4" | 1/2" | 1/8" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1/2" | 1 1/4" | 3/4" | 1/2" | 1/8" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Threaded-Hole Knobs
13
16
Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch | Dp. | Wd. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 13—Two Arm Grip | |||||||||||
Black Phenolic Plastic | |||||||||||
| M6 | 1mm | 12mm | 29mm | 19mm | 13mm | __ | Brass | -20 to 380° | 00000000 | 00000 | 00000 |
| M6 | 1mm | 12mm | 51mm | 29mm | 19mm | __ | Brass | -20 to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 12mm | 29mm | 19mm | 13mm | __ | Brass | -20 to 380° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 12mm | 51mm | 29mm | 19mm | __ | Brass | -20 to 380° | 00000000 | 0000 | 0000 |
Style 16—Two Arm Grip | |||||||||||
Black Plastic | |||||||||||
| M4 | 0.7mm | 10mm | 35mm | 10mm | 15.5mm | 8mm | Brass | -40 to 230° | 00000000 | 0000 | 0000 |
| M6 | 0.8mm | 10mm | 45mm | 10mm | 20mm | 8mm | Brass | -40 to 230° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 16mm | 45mm | 13mm | 20mm | 11mm | Brass | -40 to 230° | 00000000 | 0000 | 0000 |
T-Slot Bolts
Machined Neck
Round Neck
For quicker setups than a separate T-slot nut and stud, slide these bolts into T-slot tracks on machine tool tables.
Stainless steel bolts have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Head | Partially Threaded | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Lg. | Lg. | For Slot Wd. | Lg. | Wd. | Ht. | Min. Tensile Strength, psi | Fastener Strength Grade/Class | Specifications Met | Each | |
Machined Neck—Steel | ||||||||||
3/8"-16 | ||||||||||
| 3/4" | 1" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 00000 |
| 7/8" | 1 1/4" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/8" | 1 1/2" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 1 3/4" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 1/4" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 1/2" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 3" | 3/8" | 3/4" | 11/16" | 3/16" | 100,000 | __ | __ | 000000000 | 0000 |
1/2"-13 | ||||||||||
| 3/4" | 1 1/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1" | 1 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/4" | 1 3/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 1/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 3/4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 3" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 3 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 4 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 5" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 2" | 6" | 1/2" | 1 1/8" | 7/8" | 9/32" | 100,000 | __ | __ | 000000000 | 0000 |
5/8"-11 | ||||||||||
| 1 1/2" | 2" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 1/4" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 1/2" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2 3/4" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 3" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 3 1/2" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 4" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 4 1/2" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 5" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 2" | 6" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
| 2 1/2" | 8" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 100,000 | __ | __ | 000000000 | 0000 |
3/4"-10 | ||||||||||
| 1 1/2" | 3" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 4" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 4" | 7/8" | 1 3/4" | 1 1/2" | 9/16" | 100,000 | __ | __ | 000000000 | 00000 |
| 1 3/4" | 4 1/2" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 5" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 1 3/4" | 5" | 7/8" | 1 3/4" | 1 1/2" | 9/16" | 100,000 | __ | __ | 000000000 | 00000 |
| 2" | 6" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 2" | 6" | 7/8" | 1 3/4" | 1 1/2" | 9/16" | 100,000 | __ | __ | 000000000 | 00000 |
| 2" | 7" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 2 1/2" | 8" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
| 2 1/2" | 10" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 100,000 | __ | __ | 000000000 | 0000 |
7/8"-9 | ||||||||||
| 1 3/4" | 4" | 7/8" | 1 3/4" | 1 1/2" | 9/16" | 100,000 | __ | __ | 000000000 | 00000 |
| 1 3/4" | 4" | 1" | 2" | 1 3/4" | 5/8" | 100,000 | __ | __ | 000000000 | 00000 |
| 1 3/4" | 5" | 7/8" | 1 3/4" | 1 1/2" | 9/16" | 100,000 | __ | __ | 000000000 | 00000 |
| 1 3/4" | 5" | 1" | 2" | 1 3/4" | 5/8" | 100,000 | __ | __ | 000000000 | 00000 |
| 2" | 6" | 7/8" | 1 3/4" | 1 1/2" | 9/16" | 100,000 | __ | __ | 000000000 | 00000 |
Machined Neck—Black-Oxide Steel | ||||||||||
1/2"-13 | ||||||||||
| 3/4" | 1 1/4" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1" | 1 1/2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1" | 1 3/4" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1" | 2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/4" | 2 1/2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3 1/2" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 4" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 2" | 5" | 1/2" | 1 1/4" | 7/8" | 5/16" | 140,000 | __ | __ | 000000000 | 00000 |
5/8"-11 | ||||||||||
| 1 1/4" | 2" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/4" | 2 1/2" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 2 3/4" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3 1/2" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 4" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 5" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 6" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
| 3" | 8" | 5/8" | 1 1/2" | 1 1/8" | 3/8" | 140,000 | __ | __ | 000000000 | 00000 |
3/4"-10 | ||||||||||
| 1 1/2" | 2 1/2" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3 1/2" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 4" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 4 1/2" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 5" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 6" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 8" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 3" | 7" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
| 3" | 10" | 3/4" | 1 3/4" | 1 5/16" | 7/16" | 140,000 | __ | __ | 000000000 | 00000 |
1"-8 | ||||||||||
| 2 1/2" | 3 1/2" | 1" | 2 1/4" | 1 11/16" | 1/2" | 140,000 | __ | __ | 000000000 | 00000 |
| 2 1/2" | 4" | 1" | 2 1/4" | 1 11/16" | 1/2" | 140,000 | __ | __ | 000000000 | 00000 |
| 2 1/2" | 4 1/2" | 1" | 2 1/4" | 1 11/16" | 1/2" | 140,000 | __ | __ | 000000000 | 00000 |
| 2 1/2" | 5" | 1" | 2 1/4" | 1 11/16" | 1/2" | 140,000 | __ | __ | 000000000 | 00000 |
| 2 1/2" | 6" | 1" | 2 1/4" | 1 11/16" | 1/2" | 140,000 | __ | __ | 000000000 | 00000 |
| 3" | 8" | 1" | 2 1/4" | 1 11/16" | 1/2" | 140,000 | __ | __ | 000000000 | 00000 |
M6 × 1mm | ||||||||||
| 15mm | 25mm | 6mm | 10mm | 10mm | 4mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 28mm | 40mm | 6mm | 10mm | 10mm | 4mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 40mm | 63mm | 6mm | 10mm | 10mm | 4mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
M8 × 1.25mm | ||||||||||
| 22mm | 32mm | 8mm | 13mm | 13mm | 6mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 35mm | 50mm | 8mm | 13mm | 13mm | 6mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
M10 × 1.5mm | ||||||||||
| 30mm | 40mm | 10mm | 15mm | 15mm | 6mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 45mm | 63mm | 10mm | 15mm | 15mm | 6mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 60mm | 100mm | 10mm | 15mm | 15mm | 6mm | 130,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
M12 × 1.75mm | ||||||||||
| 35mm | 50mm | 12mm | 18mm | 18mm | 7mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 35mm | 50mm | 14mm | 22mm | 22mm | 8mm | 130,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 40mm | 63mm | 12mm | 18mm | 18mm | 7mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 55mm | 80mm | 12mm | 18mm | 18mm | 7mm | 150,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 55mm | 80mm | 14mm | 22mm | 22mm | 8mm | 130,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 75mm | 125mm | 12mm | 18mm | 18mm | 7mm | 130,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
| 75mm | 125mm | 14mm | 22mm | 22mm | 8mm | 130,000 | Class 10.9 | DIN 787 | 000000000 | 00000 |
M16 × 2mm | ||||||||||
| 45mm | 63mm | 18mm | 28mm | 28mm | 10mm | 90,000 | Class 8.8 | DIN 787 | 000000000 | 00000 |
| 63mm | 100mm | 18mm | 28mm | 28mm | 10mm | 90,000 | Class 8.8 | DIN 787 | 000000000 | 00000 |
| 100mm | 160mm | 18mm | 28mm | 28mm | 10mm | 90,000 | Class 8.8 | DIN 787 | 000000000 | 00000 |
Machined Neck—18-8 Stainless Steel | ||||||||||
3/8"-16 | ||||||||||
| 5/8" | 1" | 3/8" | 3/4" | 11/16" | 3/16" | 90,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 2" | 3/8" | 3/4" | 11/16" | 3/16" | 90,000 | __ | __ | 000000000 | 00000 |
1/2"-13 | ||||||||||
| 1" | 1 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | __ | __ | 000000000 | 00000 |
5/8"-11 | ||||||||||
| 1 1/2" | 2" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 3" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | __ | __ | 000000000 | 00000 |
| 1 1/2" | 4" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | __ | __ | 000000000 | 00000 |
| 2" | 6" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | __ | __ | 000000000 | 00000 |
3/4"-10 | ||||||||||
| 2" | 4" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | __ | __ | 000000000 | 00000 |
| 2" | 5" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | __ | __ | 000000000 | 00000 |
| 2" | 6" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | __ | __ | 000000000 | 00000 |
| 2" | 7" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | __ | __ | 000000000 | 000000 |
Round Neck—Black-Oxide Steel | ||||||||||
3/8"-16 | ||||||||||
| 1" | 1 1/2" | 3/8" | 11/16" | 11/16" | 1/4" | 120,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2" | 3/8" | 11/16" | 11/16" | 1/4" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 2 1/2" | 3/8" | 11/16" | 11/16" | 1/4" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 3" | 3/8" | 11/16" | 11/16" | 1/4" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 3 1/2" | 3/8" | 11/16" | 11/16" | 1/4" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 5" | 3/8" | 11/16" | 11/16" | 1/4" | 120,000 | __ | __ | 000000000 | 0000 |
1/2"-13 | ||||||||||
| 1" | 1 1/2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | __ | __ | 000000000 | 0000 |
| 1 1/2" | 2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 2 1/2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 3" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 3 1/2" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 4" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 5" | 1/2" | 7/8" | 7/8" | 5/16" | 120,000 | __ | __ | 000000000 | 0000 |
5/8"-11 | ||||||||||
| 1 1/2" | 2" | 5/8" | 1 1/8" | 1 1/8" | 13/32" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 2 1/2" | 5/8" | 1 1/8" | 1 1/8" | 13/32" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 3" | 5/8" | 1 1/8" | 1 1/8" | 13/32" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 3 1/2" | 5/8" | 1 1/8" | 1 1/8" | 13/32" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 4" | 5/8" | 1 1/8" | 1 1/8" | 13/32" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 5" | 5/8" | 1 1/8" | 1 1/8" | 13/32" | 120,000 | __ | __ | 000000000 | 0000 |
| 2" | 6" | 5/8" | 1 1/8" | 1 1/8" | 13/32" | 120,000 | __ | __ | 000000000 | 00000 |
3/4"-10 | ||||||||||
| 2" | 2 1/2" | 3/4" | 1 5/16" | 1 5/16" | 17/32" | 120,000 | __ | __ | 000000000 | 00000 |
| 2" | 3" | 3/4" | 1 5/16" | 1 5/16" | 17/32" | 120,000 | __ | __ | 000000000 | 00000 |
| 2" | 3 1/2" | 3/4" | 1 5/16" | 1 5/16" | 17/32" | 120,000 | __ | __ | 000000000 | 00000 |
| 2" | 4" | 3/4" | 1 5/16" | 1 5/16" | 17/32" | 120,000 | __ | __ | 000000000 | 00000 |
| 2" | 5" | 3/4" | 1 5/16" | 1 5/16" | 17/32" | 120,000 | __ | __ | 000000000 | 00000 |
| 2" | 6" | 3/4" | 1 5/16" | 1 5/16" | 17/32" | 120,000 | __ | __ | 000000000 | 00000 |
| 2" | 7" | 3/4" | 1 5/16" | 1 5/16" | 17/32" | 120,000 | __ | __ | 000000000 | 00000 |
T-Slot Nut and Setup Stud Kits
For mounting items to your machine table, these kits contain the full system of necessary components. Choose the kit with slot width matching that of your table.
Each kit includes T-slot nuts, setup studs, flange nuts, coupling nuts, and a T-slot cleaning tool.
T-Slot Nut | Setup Stud | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Slot Wd. | No. of Pieces | Includes | Threading | Base Ht. | Base Wd. | Overall Ht. | Threading | Min.Tensile Strength, psi | Material | Each | |
5/16"-18 Thread Size | |||||||||||
| 3/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 1/4" | 5/8" | 3/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
3/8"-16 Thread Size | |||||||||||
| 7/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7/32" | 11/16" | 1/2" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 1/2" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/32" | 7/8" | 1/2" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 9/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 7/8" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
1/2"-13 Thread Size | |||||||||||
| 9/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 7/8" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 5/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/32" | 1" | 5/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
| 11/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7/16" | 1 1/8" | 3/4" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
5/8"-11 Thread Size | |||||||||||
| 11/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7/16" | 1 1/8" | 3/4" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 3/4" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 15/32" | 1 1/4" | 3/4" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 13/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/16" | 1 1/4" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
3/4"-10 Thread Size | |||||||||||
| 13/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/16" | 1 1/4" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 7/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9/16" | 1 1/2" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 5/8" | 1 5/8" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1 1/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/16" | 1 5/8" | 1 1/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
7/8"-9 Thread Size | |||||||||||
| 1" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 5/8" | 1 5/8" | 1" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1 1/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/16" | 1 5/8" | 1 1/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 1 1/8" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 3/4" | 1 3/4" | 1 1/2" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
1"-8 Thread Size | |||||||||||
| 1 1/16" | 37 | 4 T-Slot Nuts 4 Setup Studs each in 3", 4", 5", 6", 7", and 8" Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11/16" | 1 5/8" | 1 1/8" | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M8 Thread Size × 1.25mm Thread Pitch | |||||||||||
| 10mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 6mm | 16mm | 11mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 00000 |
M10 Thread Size × 1.5mm Thread Pitch | |||||||||||
| 12mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 7mm | 19mm | 13mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 14mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9mm | 22mm | 16mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M12 Thread Size × 1.75mm Thread Pitch | |||||||||||
| 14mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9mm | 22mm | 16mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 16mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 9mm | 25mm | 16mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 17mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 140 mm, 150 mm, 175 mm, and 200 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11mm | 29mm | 19mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M16 Thread Size × 2mm Thread Pitch | |||||||||||
| 18mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 150 mm, 175 mm, 200 mm, and 250 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 11mm | 29mm | 19mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
| 20mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 150 mm, 175 mm, 200 mm, and 250 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 14mm | 32mm | 25mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |
M20 Thread Size × 2.5mm Thread Pitch | |||||||||||
| 22mm | 37 | 4 T-Slot Nuts 4 Setup Studs each in 80 mm, 110 mm, 150 mm, 175 mm, 200 mm, and 250 mm Lengths 4 Flange Nuts 4 Coupling Nuts 1 T-Slot Cleaner | Partially Threaded | 14mm | 35mm | 25mm | Threaded on Both Ends | 125,000 | Black-Oxide Steel | 0000000 | 000000 |