Connect to a compatible ratchet or electric threader to cut external pipe and conduit threads.

Add or replace parts such as drive adapters, die sets, and drive bars for the Ridgid Large Size Pipe and Conduit Threader Adapter.

Carry this pipe and conduit threader to your work site.

Thread, cut, and ream pipe and conduit with these machines.

Use these dies with Ridgid pipe and conduit threader die heads on Ridgid pipe and conduit threaders.

Cut threads in PVC with the specially designed teeth on these high-speed steel dies.

Use these dies to create external threads on bolts, studs, and rods.

Create external pipe and conduit threads.

A smaller width than standard hex dies lets you repair threads in tight spaces.

Clamp these dies around your workpiece, so you can start thread repair anywhere along the length of a bolt, stud, or rod. They're hex shaped for use with conventional wrenches.

Renew rusted and damaged pipe and conduit threads.

Clean and restore the fine threads on power transmission shafts that are used with bearing locknuts. Dies are sized according to the American Bearing Manufacturer's Association (ABMA).

Slide over the end of threaded rod, pipe, and conduit to the area where threads are damaged, then tighten and rotate to repair threads.

One file restores pipe and conduit threads in many sizes.

Use these wrenches to turn hex-shaped dies by hand. They're also known as die stocks.

Sized to cut oversized threads, these tools are often used to tap holes where the threads will shrink due to heat treatment or plating.

Tap threads for left-hand threaded fasteners.

Use these taps on hard and abrasive material, such as heat-treated metal, nickel, and fiberglass.

With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers.

Create oversized threads while keeping chips clear. These taps are sized for use in holes where the threads will shrink due to heat treatment or plating.

These taps cut left-hand threads while keeping chips clear.

Also known as cold-forming and fluteless taps, these press threads into material without cutting it, so no chips are created.

The spiral flute design pulls chips back toward the tap, so chips won't accumulate in closed-end holes.

Coated with chromium carbide or titanium carbonitride (TiCN), these cobalt steel taps cut smoothly through soft material to produce accurate threads.

A high helix angle provides the cutting strength needed to tap threads in titanium. These cobalt steel taps have an open flute design that keeps chips clear, so they don't need to be reversed to prevent buildup.

With an extra-long shank, these taps have extended reach for tapping deep and hard-to-reach areas in pipe and conduit.

Use these carbon steel taps for thread repair and occasional tapping of pipe and conduit. They can tap threads into most metal and plastic, but they have a shorter tool life than standard taps.

Drill and thread holes for pipe and conduit without switching tools.

Also known as interrupted-thread taps, these have extra space between the cutting threads, so large chips fall without packing and high amounts of lubricant can flow between the tap and the workpiece.

The spiral flutes on these pipe and conduit taps keep chips clear by drawing them back out of the hole, so there's no need to reverse the tap while cutting threads.

Cut threads in PG thread sizes commonly used for European conduit.

These holders work like sockets to connect taps to ratchet wrenches.

For occasional or light-duty hand tapping, connect a tap to these wrenches. They have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.

With a T-handle design, these wrenches are more compact than straight-handle tap wrenches but provide less leverage.

Use with a tap to thread holes by hand. These wrenches are more compact than straight-handle tap wrenches, so they can be used to tap in tighter spaces.

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

These steel cases close for easy transport and are labeled with sizes for organizing tools. Taps and drill bits are not included.

These tools have adjustable blades to repair any inch or metric thread size. Use them on threaded holes with an ID from 5/16" to 1-1/4" or 8 mm to 32 mm.

One file restores a range of thread sizes in most hole diameters.

Attach these tools to a socket wrench to restore rusted and damaged spark plug threads in two common sizes.

For start-to-finish tapping of left-hand threads, these sets include one taper-, one plug-, and one bottoming-chamfer tap.

Multiple tap sizes allow tapping a range of hole diameters. Connect these taps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers.

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included.