These rings mount flush and fold down when not in use to eliminate obstructions.

Accommodate ties in any direction with these rings that swivel all the way around.

Also known as pad eyes, these rigid rings provide a strong, fixed anchor point.

Large holes in the base allow adhesive to flow through.

Use these rings to make a temporary anchor point on ferrous metal surfaces.

Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.

Use these guides to position a rope.

Wind rope around these cleats for a secure hold.

Press rope into the gripping body of these cleats for a quick hold.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

Position the ratchet buckle anywhere along the webbing to access the buckle more easily.

Protect items from theft and tampering; these tie downs have a combination lock on each end.

A polyurethane strap on one end of these tie downs stretches and contracts to maintain even tension when loads shift.

When full lengths of track won't fit, use these plates to mount a single fitting.

These straps have a ratchet buckle that tightens incrementally for maximum tension.

Block off unused track openings.

Slide these hooks into track to hang equipment or attach straps.

Use these plates where full lengths of track won't fit to create one anchor point.

These straps have a ratchet buckle that tightens incrementally for maximum tension.

Set the amount of tension on these straps to prevent damage from overtightening. They have a ratchet buckle that tightens incrementally.

These guides have a flat slot that accepts webbing and prevents it from twisting.

These aluminum beams provide lightweight decking and bracing.

Snap these hooks into track to hang equipment or attach straps.

These bags snap into track to create easy storage.

Attach webbing to these buckles without sewing.

Permanently sew webbing onto these buckles.

Press the button to retract the webbing for easy storage.

Use this webbing in tie down and towing applications. It absorbs shock and will not scratch or damage the contact surface.

The track fitting attaches to snap-in load-securing track, also known as E-track.

Permanently sew webbing onto these hooks.

The base of these hooks grip rope.

A tight weave gives this webbing better abrasion and slip resistance than standard nylon webbing.

Sunlight and salt water are no match for this webbing that also resists chemicals and abrasion.

A nylon core makes this webbing stronger than standard cotton webbing.

This slip-resistant webbing remains flexible, even in low temperatures, and is easy to clean.

Often used in temperatures up to 500° F without burning or melting. This webbing is also soft to the touch.

Add a slide to webbing to make adjustable straps.

Shorten the length of the tie downs between the hooks.

Cinch the loop around large anchor points.

Adjust the length by attaching the hook into a slot in the strap.

Also known as bungee cords and shock cords, these tie downs have an outer layer of fabric to protect the inner elastic from abrasion.

These tie downs won't become brittle or hard after exposure to sunlight.

Able to withstand high temperatures, oil, and most chemicals, these tie downs are appropriate for harsh environments.

These straps have holes on each end to accept a hook.

Suitable for marine environments, this cord resist corrosion from salt water and chlorine.

Strap is wider than cord to distribute pressure across the load.

Also known as bungee cord and shock cord, a fabric cover protects the inner elastic from abrasion.

Push the mounting plate into the collar to grip the cord.

Adjust the location of the hook along the cord.

The thick wire coil on these hooks makes them stronger than standard hooks.

Create a loop in elastic cord by snapping these fittings together.

Pull the lever on these binders to quickly take up slack.

Secure heavy cargo, then remove and store the handle to prevent unwanted adjustments.

Use these nets as a barrier or stretch them over light loads in vans and small transport vehicles.

Hold heavy loads in place with these strong nets that have more attachment points and thicker webbing than light duty cargo nets.

The hook on these straps quickly connects to the buckle—no need to spend time threading the end through the buckle.

Cut rolls to length and add the no-sew buckle.

For use in environments subjected to chemicals, these mounts withstand the most corrosive conditions.

Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

These cable ties come with a material certificate with traceable lot number and product shelf life.

Create custom-length cable ties for large bundles and heavy materials.

These ties meet UL flammability requirements.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

Secure and separate parallel bundles with the same tie.

Protect sensitive electronic equipment from static buildup.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Identify bundles at a glance.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Identify bundles at a glance.

The buckle allows you to cinch these ties tight.

These ties stretch to hold material tightly without slipping.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Flexible enough for small bundles, these ties are often used for electronics.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Create custom-length ties from a roll with hook on one side and loop on the other.

Create a cable tie with a buckle—no sewing required.